Congrats on an excellent build. I put mine together today. I also had the 3pdt offboard wiring pcb. Unfortunately I have some troubleshooting ahead. The initial test before installing into the enclosure was producing alot of feedback - although when notes were played it definitely made that Billy Corgan asymmetrical clipping tone. I tidied up some soldering joints and swapped out the socketed ICs and suddenly got no signal when the switch was engaged, aside from some static. Same after putting the original ICs back. I didnt use board mounted pots and suspect the wiring is an issue somewhere. Thats the way it goes sometimes. Your build looks great and your info is very helpful. Are you using a decal for enclosure art?
Hey Ric, awesome that you put one together as well. Good luck with the troubleshooting. Probably a short somewhere. Anyway check out my other video on enclosure graphics for how I do my decals! Thanks!
What an awesome sounding pedal, I just ordered this PCB today. I’m new to pedal building and was wondering how difficult it would be to add an LED indicator light to this pedal as I just noticed there isn’t one on it. I know it’s not the end of the world, just easier to keep track of which pedals are on/off.
Do you have a video showing the build of this pedal? I didn't find anything that has the full build. I'm stuck and this was my first attempt for guitar pedals.
@@pougnetpedalsI don't know how to install the foot switches or the potentiometers. There were no photos or videos that I can find a step by step build. Any help will be much appreciated.
Potentiometers are soldered to the back side of the board (opposite the component side). The volume and gain are right-side up. The tone is upside down. This is shown clearly in here: th-cam.com/video/D9bxxmEyiew/w-d-xo.html. Footswitches and offboard wiring is standard. Use the following info as reference. tagboardeffects.blogspot.com/2012/02/offboard-wiring.html. Not that rullywow make an offboard wiring PCB to make wiring the 3PDT footswitch much easier. www.rullywow.com/product/3pdtv3-1a/
@@pougnetpedals Thank you so much for the help and references. I really appreciate it. Question, do you sell boards and components for guitar pedals? It would be nice if I could purchase these from someone that can help. I'm in the States.
Congrats on an excellent build. I put mine together today. I also had the 3pdt offboard wiring pcb. Unfortunately I have some troubleshooting ahead. The initial test before installing into the enclosure was producing alot of feedback - although when notes were played it definitely made that Billy Corgan asymmetrical clipping tone. I tidied up some soldering joints and swapped out the socketed ICs and suddenly got no signal when the switch was engaged, aside from some static. Same after putting the original ICs back. I didnt use board mounted pots and suspect the wiring is an issue somewhere. Thats the way it goes sometimes. Your build looks great and your info is very helpful. Are you using a decal for enclosure art?
Hey Ric, awesome that you put one together as well. Good luck with the troubleshooting. Probably a short somewhere. Anyway check out my other video on enclosure graphics for how I do my decals! Thanks!
What an awesome sounding pedal, I just ordered this PCB today. I’m new to pedal building and was wondering how difficult it would be to add an LED indicator light to this pedal as I just noticed there isn’t one on it. I know it’s not the end of the world, just easier to keep track of which pedals are on/off.
Do you have a video showing the build of this pedal?
I didn't find anything that has the full build. I'm stuck and this was my first attempt for guitar pedals.
No build video. Where are you stuck?
@@pougnetpedalsI don't know how to install the foot switches or the potentiometers. There were no photos or videos that I can find a step by step build. Any help will be much appreciated.
Potentiometers are soldered to the back side of the board (opposite the component side). The volume and gain are right-side up. The tone is upside down. This is shown clearly in here: th-cam.com/video/D9bxxmEyiew/w-d-xo.html. Footswitches and offboard wiring is standard. Use the following info as reference. tagboardeffects.blogspot.com/2012/02/offboard-wiring.html. Not that rullywow make an offboard wiring PCB to make wiring the 3PDT footswitch much easier. www.rullywow.com/product/3pdtv3-1a/
@@pougnetpedals Thank you so much for the help and references. I really appreciate it. Question, do you sell boards and components for guitar pedals?
It would be nice if I could purchase these from someone that can help. I'm in the States.
Not a dealer, but I will put out a video on where I buy soon. Spoiler... look at taydaelectronics