💎 How To Format Startimes Decoder And Scan To Get Back Your Channels
ฝัง
- เผยแพร่เมื่อ 4 ก.ย. 2022
- How To Format Startimes Decoder And Scan To Get Back Your Channels
_
LINKS
WEBSITE:
www.pbteck.com
INSTAGRAM;
/ pbtecknology
FACEBOOK;
/ pbtecknology
TWITTER
/ pbtecknology
TELEGRAM:
t.me/pbtecknology
#startimes #satellite #tv #pbteckinfo #lnb #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #free - วิทยาศาสตร์และเทคโนโลยี
I hope this video has helped you to solve your problem. Comment below your thoughts or whatever you misunderstood. Help this channel to grow by hitting LIKE, SUBSCRIBE and SHARE button. Thanks For Watching...
👍
It still says List is empty 😢😢😢
This actually worked..thank you
you're highly welcome 🙏🏾
Thanks dear you have helped me a lot I appreciate it
You're highly welcome ❤️
Please help me,,, Channel list is empty,,, how should I get them back?
Ineed 1
Hi
hi
What about your previous subscription
Scanning the decoder will have no effect on the subscription
Mine signal strength and signal quality are at 0% percent
connect the cable well and adjust the satellite dish to get a stable signal. if you can't do that on your own, call the help of an installer
Can we do same for antenna??
If you have a stable signal from your antenna, you can reset the decoder to factory default and scan for your TV channels.
If you don't know the pin how can you open the channels that are locked
Using the Startimes decoder, you can't bypass the security system. Unless you run a software on the decoder, which is illegal to do.
You can still get the channels using an FTA decoder and the right software.
How to get decoder pin code
Default Codes (0000), (1111), (1234) 🙏🏾
Pls make a video on how to solve "channel list is empty"
Alright
I have the same problem
How can I change name on the decoder?
You can call Startimes office to request for change of ownership. They will demand the iuc number of the Decoder
Bro please I formatted my strong decoder by mistake and all channels are out, how do I fix it
Go-to the installation Menu, select a satellite name, hotbird/ Astra 2a/ intelsat etc..
Then Add Transponder ( 12525 V 30000)
Select (blind Scan) option to proceed. Wait for it to complete.
@@pbteckinfo ok I'll do it
Bro mine keeps rebooting nonstop am stuck I don't even know what to do
Why is decoder showing a lot of fog
Off the decoder and reconnect the cables well
My channels are not complete
Rescan the decoder
😢 Channel is list empty
Check a stable signal from the satellite dish to proceed