Thank you for this review. I needed a die cutting machine with a large opening, but I really don’t want to pay over $150, so I’ve been looking at this machine as an option. And you totally helped me make a decision. Thank you!
Hi New subs here, I just got me one of these before Xmas , I’ll haven’t tried yet but I’ll soon , but I need to watch more videos to learn more, thanks for sharing
Thanks for the video, I just got one of these for Christmas. I only have two die's for it at the moment but I have always wanted one. I have a small Sissix enbosser, but this does both. I was glad to hear it popped and cracked with you like it did me. Now all I need to do is buy some die's for it.
I'm not sure I have ever seen the wooden dies but I do have some 4 - inch thick Sizzix dies, made from steel and plastic. I ran a few of those through the machine and they work fine, I run them through with just 1 plate instead of 2. I hope that somewhat answers your question.
I just found your video, thank you for your review an demonstration of this machine, have been trying to decide if I want to purchase one, by any chance have you tried to cut felt?
So sorry for the delay in letting you know if this machine will cut felt. Well, I finally made a trip to the fabric store and purchased medium and thin weight felt. Good news, both weights cut well in the machine, I used simple shaped dies (circles, squares, stars, hearts etc., all cut nicely.👍
Quite interesting, D. Do you have a follow up review/opinion after using this for 7 months? As far as replacement cutting plates, you can buy acrylic sheets at places at Blick Art Supplies in the correct thickness and they can be cut to the specific size with a saw (sand off any rough edges). What is the warranty like?
Yes, I do plan on making a follow up review, at 12 months. I am happy with the quality and durability of this machine, so far, not a complaint. The machine comes with a 1-year warranty. Thank you for commenting and subscribing. ❤
Thank you for this tutorial! I looked at several videos before I found yours, which is the best! The instructions ARE very sparse. I couldn’t for the life of me get it to work. I got the same 9” machine. I also cannot find just plain embossing folders. Could you please possibly add a link or so for supplies, etc. ? TIA! Tam
My suggestion is to try different shim thicknesses, add an extra sheet of copy paper or cardstock, even thin pieces of cardboard till you find the right pressure for the perfect cuts or embossing. It does take some practice with nearly all the machines I have tried. Good luck, it's well worth it once you learn.
Hello I am just seeing this video. I had no idea that vevor released a manual embossing machine. This is great to know. I wanted to know if you could run some vynl through it. I am curious to see if it will cut it all the way.
Great demonstration. I actually bought the exact machine ten minutes before I found your video. Your demo makes me believe I'll be more than happy with my purchase when it arrives. Bought on Vevor website and new customers who register get a discount. Paid $89 free shipping. What I liked was the larger 9" opening and that underneath the plastic housing are metal gears and handle. I am looking to emboss a heavier gauge copper metal without cutting through. Did you by any chance try any metal in the 36-38 gauge range? Approx. 0.3mm thick. Thanks again!
Thank you for the kind comment, I hope you like the machine as much as I do. I have only used this machine for paper crafting, I hope it works out well for your metal works. I recommend playing with different shim thicknesses if you have any issues. Please let me know how it works for you and your thoughts on it.
Hi,Thanks for creating this video, really helpful. I've watched this video as my reference for buying die cutter., but have you make any review video about review of this machine after months of usage? Really curious to know how it perform after months. Or maybe you can tell me if there any problem while using this machine? Thank you so much..👍💯
So glad you found my video helpful. I am planning on doing a follow up review after 1 full year of using the machine. I have no complaints or issues, really happy with this machine.
Available from Amazon.com: Spellbinders CUTTING PLATES EXTENDED (C) 2- pk or Sizzix, One Size Cutting Pad for Big Shot Plus 660581, 2 - pk. Either set will work, your machine might need extra shims (card stock or thin cardboard), it's all about experimenting with different thicknesses of shims to see what works best for you.
Have you tried sizzix embossing folders? My new vevor works great on dies and the embossing folder that came with it. But when I tried the sizzix embossing folder I couldn't get it thru. I used the cutting plates recommended for embossing. It's the only other embossing folder I have. Will buy more when I know what brands to get.
Did you try with sizzix cutting dies? Or Just with regular ones? Besides that, have you tried with different embossing folders for example the ones sold in Shein? Thanks in advance 😊
@tonyarielespinoza6512, In answer to your questions, I did try Sizzix cutting dies in the machine, and they cut out perfectly. I have not purchased any embossing folders from Shein, but I have tried different brands and thicknesses of embossing folders, and all embossed well.
Hi ,I have tried using "regular" embossing folders that I buy from Ali-ekspress. I used the 2 thinnest plates and that gave a very good result...if you like I could send a foto but need your messenger or email!
Thank you for this review. I needed a die cutting machine with a large opening, but I really don’t want to pay over $150, so I’ve been looking at this machine as an option. And you totally helped me make a decision. Thank you!
I'm so glad I could help, I am very happy with this cutting machine.
Got mine today, have already die cut the little dog it is brilliant I can see years if good use with this little machine love it. X
gracias por compartir!!! no hay casi videos de esta maquina
Hi New subs here, I just got me one of these before Xmas , I’ll haven’t tried yet but I’ll soon , but I need to watch more videos to learn more, thanks for sharing
Keep the videos coming of your crafting and reviews. Did a great job with the first video.
Thank you! Will do!
Just came across your channel and subscribed. Hope it grows and grows!
Thank you for the lovely comment. Hope to bring more content real soon.
You have some cute dies.
Thanks for the video, I just got one of these for Christmas. I only have two die's for it at the moment but I have always wanted one. I have a small Sissix enbosser, but this does both. I was glad to hear it popped and cracked with you like it did me. Now all I need to do is buy some die's for it.
Hi! I liked your review, very well explained! Just one question, have you try the thick wooden dies?
I'm not sure I have ever seen the wooden dies but I do have some 4 - inch thick Sizzix dies, made from steel and plastic. I ran a few of those through the machine and they work fine, I run them through with just 1 plate instead of 2. I hope that somewhat answers your question.
@@DsCraftedCards thank you for trying them ❤️
I just found your video, thank you for your review an demonstration of this machine, have been trying to decide if I want to purchase one, by any chance have you tried to cut felt?
You are welcome! I have not tried using felt in the machine but I will look for some and try it out and let you know.
@@DsCraftedCards Thank you, that would great, an thank you for answering
So sorry for the delay in letting you know if this machine will cut felt. Well, I finally made a trip to the fabric store and purchased medium and thin weight felt. Good news, both weights cut well in the machine, I used simple shaped dies (circles, squares, stars, hearts etc., all cut nicely.👍
Quite interesting, D. Do you have a follow up review/opinion after using this for 7 months? As far as replacement cutting plates, you can buy acrylic sheets at places at Blick Art Supplies in the correct thickness and they can be cut to the specific size with a saw (sand off any rough edges). What is the warranty like?
Yes, I do plan on making a follow up review, at 12 months. I am happy with the quality and durability of this machine, so far, not a complaint. The machine comes with a 1-year warranty. Thank you for commenting and subscribing. ❤
Thank you for this tutorial!
I looked at several videos before I found yours, which is the best!
The instructions ARE very sparse. I couldn’t for the life of me get it to work. I got the same 9” machine. I also cannot find just plain embossing folders.
Could you please possibly add a link or so for supplies, etc. ?
TIA!
Tam
My suggestion is to try different shim thicknesses, add an extra sheet of copy paper or cardstock, even thin pieces of cardboard till you find the right pressure for the perfect cuts or embossing. It does take some practice with nearly all the machines I have tried. Good luck, it's well worth it once you learn.
I have purchased most of my plain embossing folders through Spellbinders.com and Amazon.com.
Hello I am just seeing this video. I had no idea that vevor released a manual embossing machine. This is great to know. I wanted to know if you could run some vynl through it. I am curious to see if it will cut it all the way.
Good question, I will have to try it out and I will let you know.
@DorisNavarro-Brown-qv3tf, I tried using the vinyl that I purchased at the Dollar Store, and the Vevor die-cutting machine worked fine.
Great demonstration. I actually bought the exact machine ten minutes before I found your video. Your demo makes me believe I'll be more than happy with my purchase when it arrives. Bought on Vevor website and new customers who register get a discount. Paid $89 free shipping. What I liked was the larger 9" opening and that underneath the plastic housing are metal gears and handle. I am looking to emboss a heavier gauge copper metal without cutting through. Did you by any chance try any metal in the 36-38 gauge range? Approx. 0.3mm thick. Thanks again!
Thank you for the kind comment, I hope you like the machine as much as I do. I have only used this machine for paper crafting, I hope it works out well for your metal works. I recommend playing with different shim thicknesses if you have any issues. Please let me know how it works for you and your thoughts on it.
Hi,Thanks for creating this video, really helpful. I've watched this video as my reference for buying die cutter., but have you make any review video about review of this machine after months of usage? Really curious to know how it perform after months. Or maybe you can tell me if there any problem while using this machine?
Thank you so much..👍💯
So glad you found my video helpful. I am planning on doing a follow up review after 1 full year of using the machine. I have no complaints or issues, really happy with this machine.
I Just bought the same machine ...but I haven't figured out what to do when I need to replace the cutting plates
I have looked into other brands and I think the plates for Gemeni 2 will do the trick 😊
I am using replacement plates from Spellbinders, they have been working well.
@@DsCraftedCards what model spellbinders?
Available from Amazon.com: Spellbinders
CUTTING PLATES EXTENDED (C) 2- pk or Sizzix, One Size Cutting Pad for Big Shot Plus 660581, 2 - pk. Either set will work, your machine might need extra shims (card stock or thin cardboard), it's all about experimenting with different thicknesses of shims to see what works best for you.
Have you tried sizzix embossing folders? My new vevor works great on dies and the embossing folder that came with it. But when I tried the sizzix embossing folder I couldn't get it thru. I used the cutting plates recommended for embossing. It's the only other embossing folder I have. Will buy more when I know what brands to get.
Can you use a template that is paper size 8.5 x 11 ????
@TabutTrikru, I'm not sure what you mean by a template, but you can die cut or emboss a full sheet of cardstock that measures 8.5 x 11.
Did you try with sizzix cutting dies? Or Just with regular ones?
Besides that, have you tried with different embossing folders for example the ones sold in Shein?
Thanks in advance 😊
@tonyarielespinoza6512, In answer to your questions, I did try Sizzix cutting dies in the machine, and they cut out perfectly. I have not purchased any embossing folders from Shein, but I have tried different brands and thicknesses of embossing folders, and all embossed well.
@@DsCraftedCards Thank you for your prompt response, this helps me a lot.
Are you still using and liking this machine?
Still enjoying and using the die cutting machine. No problems to report.😃
where did you find this machine?
I found this machine on Vevor.com. Free shipping and a coupon for a % off your first purchase.
They should compensate you. 😊
Thank you for the kind comment, maybe I need more subscribers before Vevor will collaborate with my channel.
I ordered it from Vevor.com, if you decide to purchase it from them be sure to look for their coupons.
Hi ,I have tried using "regular" embossing folders that I buy from Ali-ekspress. I used the 2 thinnest plates and that gave a very good result...if you like I could send a foto but need your messenger or email!
@MsBene59, thats good to know that regular Ali-express embossing folders work well in the machine. I've never tried Ali-express folders.
@@DsCraftedCards they are just as good as anyother! Just cheaper 😉