@@Koss-channel what is the ceramic pipe used For so I can find one ,and is that nicrom wire ? I subscribed because of this video never in a hundred years would I thought to do this just awesome. Good job. I have temp controller. Also how long does the wire last? Thanks 😁👍
Man i love this idea. I wanted to build one of these myself after watching this video. Nearly had a stroke when i seen the price that people are asking for the fuse / pipe.
@@rawbase8393 incorrect, 400C/752F for that model. Good job. Still a bit low for this particular application, so you've got me there at least. Oh and the "or similar" was put there for just this kind of situation.
Hello! Could you please tell mit what high temperature sealing did you use? Im from austria, so buying a german product would be easy, but in the video there is not the whole tube visible. Thank you so much for your help! Best wishes, Michael
Не думал, что фарфор от высоковольтной вставки силового трансформатора может держать такие температуры. Ну а так нормальная печурка, лайк однозначно... а подписан давно... Когда следующий нож?
" COORSTEK " HAS CERAMIC TUBE AVAILABLE.. A 2INCH INSIDE DIAMETER X 18 INCH TUBE IS $119. USD.. SO YEAH ITS ON THE PRICEY SIDE, FOR SURE..UNLESS YOU HAVE A SOURCE FOR THE GIGANTIC FUSE USED IN THE VIDEO..THERE MIGHT BE ANOTHER SOURCE FOR IT, COORSTEK WAS THE 1ST PLACE THAT LISTED PRICES..AND THE 1ST OF A 3 MIN GOOGLE SEARCH FOR CERAMIC TUBE..
Anybody have thoughts a piece of tube with a thick coating of like high temp furnace paint on the outside would work? I am not having any luck finding this ceramic tubing for a good price. This could be a very cheap HT option if so
DO NOT USE CEMENT!!! holy crap kiss buddy you really need to read these comments people are going to get hurt. Daniel because of the nature of cement and it's tendance to retain water it could exploded not like bomb exploid but it wouldn't be good plus it cannot withstand the temperature need to properly heat metal. Use refractory cement. It's cheap us dollars like 30-50 dollars. If your interested in building a forge there are other sources out there that will explain out what to and what material are need. Please look around and do some studying before building I don't want to see anyone get hurt. But honestly if you just want to try making a knife you don't need a forge a few fire bricks and a mapp torch angle if you have one. a good file and sand paper.
Lovely build, the high temp sealant that's not silicone is it? And isn't insulation wool the same as other thermal blankets, the more you compress it the more it looses it's insulation.
Hey man, I'm subscribed to you for a long time, tell me if I'm asking too much, but can you please give us the plans for this build? I hava also build a belt grinder and band saw after your plans. If not, it's OK, still have my like ;)
Buenos días quiero saber el nombre de cada uno de los materiales O si hay forma q me bendas uno O mejor por donación XD Ago cuchillos pero estoy comenzando de antemano le agradezco si me contestas xd
Автору судя по всему насрать на своих подписчиков...Ни ответа, ни привета. Параметров нет- неужели так сложно ответить на комментарии или вшить в видео пару строк текста?
cheap if you already have the parts maybe, where is a normal person gonna get a ceramic tube like that ? nowhere Also tempering can be done in any old oven, even a cheap toaster over, hardening on the other hand (kinda the opposite of tempering) cannot and that is what you were doing, so i would change the title to Heat Treating Electric Furnace
Is that just pvc pipe?
nope, it's ceramic pipe
Thats what i thought it was til I saw him wrap the wire then I knew it had to be something else
wowza
@@Koss-channel what is the ceramic pipe used For so I can find one ,and is that nicrom wire ?
I subscribed because of this video never in a hundred years would I thought to do this just awesome. Good job. I have temp controller. Also how long does the wire last? Thanks 😁👍
@@ronaldbrown9638 its ceramik case from used(burned) high voltage fuse
That's amazing!! Would love to build one of these with my son. We always wanted to start making our own knives, hachets etc. Great video Koss
Man i love this idea. I wanted to build one of these myself after watching this video. Nearly had a stroke when i seen the price that people are asking for the fuse / pipe.
So much skills. really love your work brother.
It's a beautiful thing! Nicely done.
Give us a heads up on the ceramic tube and controller you used please.
Cheers
An Inkbird ITC600VH or similar would work
@@meatmadmick That device only seems to go up to 210 degrees F
@@rawbase8393 incorrect, 400C/752F for that model. Good job. Still a bit low for this particular application, so you've got me there at least. Oh and the "or similar" was put there for just this kind of situation.
I found it ..thanks for the great videos going to try doing them ..ill keep watching ..!!
Do you may be have some links to where we could get some of the things you used
Like the pvc pipe and the thing to measure how hot it is
Fantastic video, Thanks for sharing.
I love seeing ppl that is so competent..... although makes me feel like a flipping idiot haha 😂
Big bless from Sweden mate
so how long do you think this will hold up before you have to change the wire? and is there any way you could have like a parts list for this please
Bonsoir WAAOOUU !
quel équipement fantastique ...MERCI !
Hello^^ What kind of glue is it and what is it called? 2:15-2:30
Kind regards
This is genius, I'd love to have a go at making something like this, can I ask are there any plans available online. Amazing build sir.
Hello!
Could you please tell mit what high temperature sealing did you use? Im from austria, so buying a german product would be easy, but in the video there is not the whole tube visible. Thank you so much for your help!
Best wishes,
Michael
Делал такой-же. Мелковат для кухонников, большая инерция, и при температурах закалки нержавейки растрескивается
What is the temperature scale on the controller? Degrees F or C? What temperature can this achieve?
Не думал, что фарфор от высоковольтной вставки силового трансформатора может держать такие температуры. Ну а так нормальная печурка, лайк однозначно... а подписан давно... Когда следующий нож?
cara ficou muito bom e fácil de fazer, além disso o custo baixo com excelente benefício.
So what temps can that reach?
How do you hook it up to an outlet
What is the material called that the PiD controller case is made out of? the metal sheet stuff?
Would you mind post g where you got all the materials?
Ingenious
Mantap ini video, terimakasih sudah memberi tau buat pemanas ini
Hi from England
OK...
You get a like for this one...
Basic construction done well... 😉
What parameters of fuse( kv, amps)?
That is really neat , were did u find the ceramic fuse ? I'm now a subscriber good stuff thx
Awesome idea, built one of these using a mullite tube and it cracked, did you have the same problem?
Impressive!
Здравствуйте. Сколько энергии эта штука потребляет?
Excellent!!!
" COORSTEK " HAS CERAMIC TUBE AVAILABLE.. A 2INCH INSIDE DIAMETER X 18 INCH TUBE IS $119. USD.. SO YEAH ITS ON THE PRICEY SIDE, FOR SURE..UNLESS YOU HAVE A SOURCE FOR THE GIGANTIC FUSE USED IN THE VIDEO..THERE MIGHT BE ANOTHER SOURCE FOR IT, COORSTEK WAS THE 1ST PLACE THAT LISTED PRICES..AND THE 1ST OF A 3 MIN GOOGLE SEARCH FOR CERAMIC TUBE..
I've been looking everywhere for a ceramic tube this size, would you mind saying where you got it from? Thanks :)
]
Honestly, take a art class at your local college. We make ceramics all the time at school. We've made tubes ceramic planters. pails etc ...
Anybody have thoughts a piece of tube with a thick coating of like high temp furnace paint on the outside would work? I am not having any luck finding this ceramic tubing for a good price. This could be a very cheap HT option if so
Class!!!!
How to reach to 2150 C on your system?
no way. wire will melt at 1500C.
Esse é Zica viu😎
Could you explain what materials do you use. Thanks
Hi great project...but where did you bought your pid controler
Amazing man!!!
This is what happens when MacGyver gets locked in a cave with Tony fucking Stark.
Skąd załatwiłeś taką ceramiczną rurę i termostat do pieca? Są tam jakieś bezpieczniki i jaką substancją pokrywałeś stalowy drut grzewczy?
So small? How do I fit coal in there?
So good
would this work using a poured concrete tube?
DO NOT USE CEMENT!!! holy crap kiss buddy you really need to read these comments people are going to get hurt. Daniel because of the nature of cement and it's tendance to retain water it could exploded not like bomb exploid but it wouldn't be good plus it cannot withstand the temperature need to properly heat metal. Use refractory cement. It's cheap us dollars like 30-50 dollars. If your interested in building a forge there are other sources out there that will explain out what to and what material are need. Please look around and do some studying before building I don't want to see anyone get hurt.
But honestly if you just want to try making a knife you don't need a forge a few fire bricks and a mapp torch angle if you have one. a good file and sand paper.
If I missed the electronics, but what did you use for the heating? Great video’s man, love watching em
Kanthal wire
с удовольствием поставил бы палец вверх, если бы сей человек ответил бы хоть однажды русскоговорящему вопрошающему.
What is the wire?
Where can i buy the parts?
super!!!
Great 👍🏻 👍🏻 👍🏻
How much voltage or amps does this need and can you make a sword size one?
Lovely build, the high temp sealant that's not silicone is it? And isn't insulation wool the same as other thermal blankets, the more you compress it the more it looses it's insulation.
Скажіть будь ласка, а який контролер використовуєте.
Hey man, I'm subscribed to you for a long time, tell me if I'm asking too much, but can you please give us the plans for this build? I hava also build a belt grinder and band saw after your plans. If not, it's OK, still have my like ;)
How many degrees temperature can it go up to?
Mehmet AŞAN find out what materials it’s made of, then search at what temperature they melt. That’s it
Как вы вороните метал?
в хлорном железе
Cool but where the heck are you going to hind one of those fuse's at
Thumbs up and enjoyed your video as well
👏👏👏👍👍👍
👍👍
Al Bundy? Is that you?
Like 4:00
wow
Buenos días quiero saber el nombre de cada uno de los materiales
O si hay forma q me bendas uno
O mejor por donación XD
Ago cuchillos pero estoy comenzando de antemano le agradezco si me contestas xd
How much is the cost of the progect?
More or less...
Класс!
канал вроде в в штатах зареган, а газовый баллон "для отдыха и рыбалки")))))
Can you make me one?
ok
А герметик русский))
4to
I don't think that's cheap
definitely cheaper than industrial ones
wtf
Автору судя по всему насрать на своих подписчиков...Ни ответа, ни привета. Параметров нет- неужели так сложно ответить на комментарии или вшить в видео пару строк текста?
no tempering
just Quenching
cheap if you already have the parts maybe, where is a normal person gonna get a ceramic tube like that ? nowhere
Also tempering can be done in any old oven, even a cheap toaster over, hardening on the other hand (kinda the opposite of tempering) cannot and that is what you were doing, so i would change the title to Heat Treating Electric Furnace
👍👍👍