I'm probably going to put some wood spacers in the welding magnets I make to keep all of the metal filings from filling in the space between the plates. Great idea for my powertig welding.
Achei interessante e sim muito trabalhoso mas tem suas compensações vou fazer os quatros pra montagem dos portões parabéns pela iniciativa de poder nos ajudar
Buen video, es interesante ver cómo puedes hacerlo. Aunque no creo que sea algo práctico dado que comprarlas ya hechas no pasan de $150 pesos mexicanos.
You need to use brass nuts and bolts, so as not to demagnetize the magnet. Come up with a casing for the magnet, so that there is not clogged metal scale and chips. It will have to be disassembled and cleaned often. Sorry about my English.
Remember that you are in a place where many people have access, so you should be more careful and use all your personal protection elements. in that way you will prevent your followers from getting accidents.create a good habit, at least wear gloves.
Why would you spend the time on this when more accurate machined ones are so affordable to purchase? They are powder coated too. Good on you for doing this, but it is not: "Wow! Awesome ideas welding Magnet".
In my country, this makes sense because i had to order my welding magnets from aliexpress and wait 2 months for delivery. If i had seen this video, i would have easily made them. Not every country has those things ready to order.
честно говоря хорошо сделать самому ,но боюсь дороже выйдет чем купить ,стоит такой где то около 8 - 10 $ а сделать 1 уйдет пол дня ,да и не факт что углы будут идеальными .
Тем более, что он замкнул магнитное поле, установив стальные (магнитные) болты и втулки, что категорически делать нельзя. Иначе через некоторое время магнит перестанет работать. Для соединения пластин надо применять только немагнитные материалы, или сами пластины делать из алюминия, например.
definitely giving a thumps up....making a decent magnetic clamp with a limited tool is hard...well done!!
Thanks 👍
very nice video
I'm probably going to put some wood spacers in the welding magnets I make to keep all of the metal filings from filling in the space between the plates. Great idea for my powertig welding.
Amazing & excellent tool for welding works. Will try to make one.
Хорошо, что у тебя есть токарный станок!!!
Very very very very very very nice good wark brilliant 👏👏👏👏👏👌
Good job but i think is better to make those bolts flat ...so you can actualy work on a flat surface
Good amazing
Thank you so much 😀
Excelente! foi o melhor que já ví, com certeza vou fazer um.
Quelles sont les mensurations pour me permettre de fabriquer dans mon atelier ?
I think i might just buy one
Inicias con un cuadrado de 15 x 15 ???
Zabardast
Se le pueden soldar pernos en lugar de tornillos y tuercas.
سلام دوست عزیز این گونیا موقع کار براده فراوانی به ان میچسبد بهتر بود دور انرا میپوشاندی
C'est une exélante ideé 👍👍👍bon travaille 👏👏👏😉
goodjob
Все классно получилось за исключением крепежного материала. Можно было под потайную головку сделать.
Super
Very good
very nice
do you have ads?
Yeah its nice but it pays off, machine quality is mutch accurate.
Excelente trabajo... pero seria bueno que tenga muestras gratis para darnos
Buena idea, y funcional. Los tornillos quizás avellanados no molestaría tanto. OK
Молодец. Какой размер магнита (диаметры внешний, внутренний, толщина) ?
تسلم ايدك
The fly was drawn to the magnet awesome.
That was an excellent idea, genial work...
Good ideas if you machine like what you have.try making without the big machine you have then it will be good idea .
Muito top 👍👍👍
أحسنت عمل جيد جدا استمر في ابداعك
Good
Can you give me thé geomtrical dimensions that you used
Thanks
Amazing...good job
I just bought 5 euro magnet today :-)
Very clean N’ perfect job! Men
Wao 👏👏👏
Achei interessante e sim muito trabalhoso mas tem suas compensações vou fazer os quatros pra montagem dos portões parabéns pela iniciativa de poder nos ajudar
Напиши размеры заготовок))))
Buen video, es interesante ver cómo puedes hacerlo. Aunque no creo que sea algo práctico dado que comprarlas ya hechas no pasan de $150 pesos mexicanos.
Es buen video aunque ya es facil conprarlas es mas satusfactorio saber que si son tuyas porque tu las isiste
@@juanhuerta4892 tienes razón, no se compara con la satisfacción de haberlas hecho tu mismo.
Спасибо супер
Parabéns pode ter certeza que essa ideia eu vou copiar
Очумелые ручки
So what weight will it hold?
gostei muito do vídeo,porém com essa trabalheira que dá,e por não ter todas essas ferramentas acho melhor comprar um esquadro magnético.
Verdade. Comprei 4 de 35kg. Para quem começa como eu, é TUDO. Realmente é muito trabalho e exige precisão.
Muy interesante parserito lo felisito
What is so awesome that I can't find in other welding magnets?
Good stuff
Actually this is the best tool which is more helpful while welding
Beautiful! But I make perfect parallelepiped on my lathe just using the 3 jaws self centering chuck. You can avoid a lot of file work!
Mucha enceñansa con estos vídeos gracaias
👌👌👍👍😘😘😍😍
*_Good ideas_*
*-Hi guys-*
Coooood
Your job is good, can i get the measure of your plate that you use? Thanks
Patta
You need to use brass nuts and bolts, so as not to demagnetize the magnet.
Come up with a casing for the magnet, so that there is not clogged metal scale and chips. It will have to be disassembled and cleaned often.
Sorry about my English.
Very very god
Awesome bro
Wooooow 👍🏆️🏆️
нельзя соединять полюса железными гайками иболтами
👍👍👍👍👍👍👍👍👍👍👍👍
Enjoy cleaning the metal shavings and dust out of that thing.
Remember that you are in a place where many people have access, so you should be more careful and use all your personal protection elements. in that way you will prevent your followers from getting accidents.create a good habit, at least wear gloves.
Awesome
Bbulupictut
👍👍👍👍👍👍
Чел уважуха
👏👏👏👏👏👏👏
👍Show
магнит имеет разные полярности а ты их соединил воедино плюс и минус. этого делать нельзя он быстро размагнитится
Muito bom
👏👏👏👏👏👏👍👍👍👍
Bravo!
Can you give measurements
Excelente!
legal com esse apoio no eixo bem estudado
asalamualaikum mas blh aku beli sepasang itu brapa harganya&bisa d kirim pa ga,,? mas,?
,👍👍👍👍
Está bien hecho el trabajo.
Pero no todos tienen un torno en casa.
Bueno.
التلاغمة ساطور ممتاز
Puedes ingeniartelas el torno solo es para el circulo central
👍👍👍
Why would you spend the time on this when more accurate machined ones are so affordable to purchase? They are powder coated too. Good on you for doing this, but it is not: "Wow! Awesome ideas welding Magnet".
SoJeph ppy0
Hajahaja
In my country, this makes sense because i had to order my welding magnets from aliexpress and wait 2 months for delivery. If i had seen this video, i would have easily made them. Not every country has those things ready to order.
Q00
belajar my bos
👍👍👍👍👍🙂
Nice job no question about, but is a lot of fuss for something you can buy for a fiver on Lidl.
Show muito bom.
А без токарного станка слабо?
Имея токарный за энное количество тысяч можна выложить эту мелоч и купить заводские.
why the all hard work? its only a few bucks...
Too many distracting adds in this video ! I shut it off !
Очень даже не плохо.Одно только.На мой взгляд помоему метал толстоватый
честно говоря хорошо сделать самому ,но боюсь дороже выйдет чем купить ,стоит такой где то около 8 - 10 $ а сделать 1 уйдет пол дня ,да и не факт что углы будут идеальными .
Excuse me can i get the measure of magnatic and plade
Süper
Annoying machine made music. This video was bearable only when muted
Exelent ARGENTINA
De q medidas es tamaño de lámina
металлический лист тонковат, надо было в 5 мм брать
metal sheet is thinish, it was necessary to take 5 mm.
Вы ошибаетесь. 1,5-2 мм вполне достаточо
why make one when you can buy one for little to nothing at canadian tire store or walmart princess auto sells them as well 5 or 10 dollars
A Rich man!!!
Болты сделать с потаем и все окей!!!!
Parabéns
Tem no meu canal um desse feito com Chapa de PVC
хэнд мейд хорошо, но в леруа три сотки стоит эта хрень.
Взял в специализированном магазине по 500 рублей с усилием 35кг. Углы держат идеально.
Тем более, что он замкнул магнитное поле, установив стальные (магнитные) болты и втулки, что категорически делать нельзя. Иначе через некоторое время магнит перестанет работать. Для соединения пластин надо применять только немагнитные материалы, или сами пластины делать из алюминия, например.
lern welding!!!