Let us know when the snow pusher plans are available. I have a similar Massey and have been wanting to build a snow pusher as well. Thanks for the great vid Viny
Ça vaut vraiment la peine d'avoir un snow pusher! Tellement mieux qu'un bucket ou une simple gratte. J'adore tes vidéos, ils sont drôles en plus! Merci!
I love your projects! I don't have a pusher, but a sno-blade and I had a problem with digging up the gravel in my driveway. I ended up taking a 2 in pipe, cutting a grove in it and putting it on the bottom of the blade. Works perfect now. You can play around with the size. I tried 3 different pipes before I found the right one.
Весело, красиво, полезно. Очень динамичный ролик, насыщенный множеством мелких приятных моментов. Они очень помогают несмотря на скорость сюжета проникнуться процессом. Ваши проекты сами по себе очень хороши.
As an Ontarian I definitely have seen some snow this year already. My area got smashed with the stuff earlier this month. These plans will come in handy in the future for sure.
Love your work man ! Keep it up, discovered your channel not long ago and I love your style of videos ! I wish for your channel to keep growing ! Love from Saguenay-lac st Jean
WoW super travail et superbe vidéo, je suis jaloux de ton atelier 🤪. Je suis concepteur de poinçon-matrice. Je suis vraiment impressionné par ton travail. Je regarde tes vidéos pour m’inspirer pour mes futurs projets sur mon tracteur et pour des équipements. Félicitations
Salut Patrice, content que mes vidéos t'inspire! Je suis aussi concepteur poinçon matrice (par la bande) disons que j'en ai fait quelque-uns pour la compagnie où je travaille, mais je suis maintenant plus spécialisé dans l'intégration robot/outillage de cellules automatisées, qui utilisent des poinçon-matrice, mais que d'autres personnes conçoivent 😅 Tu es du QC ou de France?
Very good Viny, love it as always! Look forward to the hydraulic leak video, as i have one on my mini excavator I would love some knowledge on how to solve. 🙄
@@VinyB57 I figure the valve body must have perhaps a bit too much tolerance, allowing a bit of hydraulic fluid to back flow under the weight of the machine pushing on the cylinders. I wonder if there is a 1 way valve? or backflow preventer maybe? I am not sure.
What an awesome build. It needs a trip mechanism though. Backdragging with those cylinders fully extended means that a small lip in the driveway could bend those rods into pasta. A replaceable wear edge wouldn’t hurt either.
Nice idea! I'd try it, but, my snowfalls here West of you, are either 2 or 3 inches, or 10 to 12, plus blowing snow effect. So, it's the snowblower on the tractor or the bucket on the skidsteer for me. And iffin its just an inch or 2, I just drive over it until it packs down, thaws and turns to ice. I find it's an effective way to keep the Amazon drivers away.
Really nice job Viny! And 🇨🇦🥶🇨🇦🇸🇪🥶 yes, we have snow also...but...its not as much as it use to, or Not as freecvently as before if you go back 20 years.... But nice job, have a nice Christmas and Happy New Year and hope you will get more earth saving metal in your stocking, NO COAL! 😜 TAKE CARE!
I think a rear snow blade is better for smaller tractors. You have a better grip on the wheels when the snow is behind. Somehow. I have a rear snow blade and it's working very good with chains on the rear wheels
Ngl i kinda DIG how you went from a car channel to a tractor channel i really want more upgrdes for the tractor itself though like adding a cooler engine (like a V8) to it
Merci pour l’idée! Mon père s’est acheté un tracteur, et il aimerait bien s’en faire une gratte avec un vieux souffleur qu’il à ramassé! Ma me mettre sur le projet comme cadeau de noël 😅
Yep! I kinda have a home made die that I can insert into my bigger home die. This I was not using the insert, so I was in the wider mode, I'll think about making another wider die!
I'm pretty sure you're from frostbekistan(Canada). I'm from New england US. Plows and buckets are still the king. What warm people don't understand is how different the types of snow are to work with. We usually get wet and heavy. I added rubber to my snowblower to throw slush 10yards.
Exactly. On my small yard dry and light snow is just a fun excercise to do by hand, and the rare (over here) wet heavy snow wouldn't go through a small blower anyway.
Awesome build. Im just south of you in Vermont and we havent had any snow but a small dusting. Crazy to see how much you have there. One question- Do you cylinders bottom out when you put the pusher in the drag position or do you still have some room left for buffering in case you hit something solid? Ive been told that back dragging on maxed out cylinders can be very hazardous to seals and pistons.
Well I just bought 2 giant stainless steel tanks to turn my pool into a giant hot bath! That's for next spring, so in a way, I'll be making a giant stove soon-issh!
@VinyB57 bro one time we were re shimming the break back 04 I was early Twentys well the shims were long strips of sheet metal well the guy I was helping was dropping them straight down on the ground and I either stept on one on the slivers of metal that was laying on the operating pedal or the corner of my steel toe timberland pros stepped on the pedal while his gloved hand was inside of the break laying on the bottom die . I seen everything in slow motion I touched the reverse button just as it touched his hand. No Injuries except my stomach I almost had to go home sick that day. He should have turned off the breaker on the machine I know that would be the first thing that I would do if I was working on a machine. Sorry for rambling lol it just shook loose that memory 😅
Is your wife anything like mine? She either watches out the window laughing her a** off, (Love the name on the pusher), Shaking her head at me, or dialing 9-1 and waiting for something to happen to dial the last 1.
Good Morning Sir 🤣👍You are OUTSTANDINGLY Very Funny 👍👍🤣🤣My Too A Like The Round Skin Surface 🤣🤣👍👍 Ok it is beeeending Now 🥴🤣👍 Yes It is not going into the moon ✨✨🚀🚀🤔🤔 OUTSTANDING Hand WArmer 🤣🤣👍👍 You have Polish the Church Dishes Pretty Well When You Burn Yourself Sir 🙏🙏😇👌🤣👍Keep WArm Sir 🔥🔥👍👍👌👌😇😇🍻🍻
Salut! Met un peu d'angle dans les oreilles si tu vends le plan... La plupart des machines vont se jacké sur les oreilles en reculant.. par manque de force completement étiré et de la neige pesante... Pas besoin d'etre à 45degré.. mais 2a4pouces ca comble le flottement... bref! ca fonctionne sur le tien.. belle job!
Decent but looks like it wont throw any on the side so needs to push out of the road rather often. With our 30cm in one night, you wont get even length of the tractor before needing to empty and if its wet snow blower does absolutely nothing but jam things in tight. I do like the pull function but its only for machines that have hydraulics, so not really good for ATV and garden tiller type of vehicles.
In respect of the trailer, belt thing...couldn't you just manufacture a continuous belt, in order to save all that rewinding farting about??? Deeply appreciate your channel, by the way! Your sense of humour appeals to me and I am utterly impressed with your extremely heavy project manufacture. Those building a sine bar, or a dinky knife, should take note.
Link to website and plans: 57design.ca/
Let us know when the snow pusher plans are available. I have a similar Massey and have been wanting to build a snow pusher as well. Thanks for the great vid Viny
Yes... I NEVER saw a single snow flake in my entire life here in Brazil. Commented, liked, and subscribed.
NICE! thanks Vilmar! Glad you liked my ''frozen'' content!
I bought the snow pusher for our tractor and love it. Had 8 inches snow and only took 10 minutes with 3 swipes to clear snow.
I'm with you 100%! This is the best winter attachment for real! I do love my snow roller tho 😉
Ça vaut vraiment la peine d'avoir un snow pusher! Tellement mieux qu'un bucket ou une simple gratte. J'adore tes vidéos, ils sont drôles en plus! Merci!
Merci merci! J'adore mon snow pusher! 👍
Debated building one of these for either my tractor or Bobcat. It definitely works better than mangling everything with the bucket.
Sure does!
Thanks for the wire brush tip. That's gonna come in handy.
You're welcome! 😉
Nice fabrication and it's environmentally friendly 😊
Good to see old school skills in action
Love the humour, love the builds. New viewer... Subscribed.
Nice! Glad you liked it! 👍
Last Week i find your Channel and i enjoy your Videos. Greetings from Germany
Thanks mate! 👍
I love your projects! I don't have a pusher, but a sno-blade and I had a problem with digging up the gravel in my driveway. I ended up taking a 2 in pipe, cutting a grove in it and putting it on the bottom of the blade. Works perfect now. You can play around with the size. I tried 3 different pipes before I found the right one.
Hey thanks for the advice mate!
Весело, красиво, полезно. Очень динамичный ролик, насыщенный множеством мелких приятных моментов. Они очень помогают несмотря на скорость сюжета проникнуться процессом. Ваши проекты сами по себе очень хороши.
Very cool vid, Vinny! Your production is top notch and your content rocks. Keep them coming.
I'll try to keep the good stuff coming! 😅
As an Ontarian I definitely have seen some snow this year already. My area got smashed with the stuff earlier this month. These plans will come in handy in the future for sure.
That's the plan! Still waiting to get some more serious white stuff tho!
Damn it Viny!
J'men allait dans le garage pour bricoler pis ton video est sorti.
Tu stop ma productivité😉
Ah merde, désolé! 😅 Bonne soirée dans l'garage! 👍
Beautiful work! I've been using a quad with a snowplow for a few years. There's always room for improvement and more impliments.
You're right, you never have enough impliments! 😅
Great vid. Informative, instructive, and full of humor. A 10/10
thanks for the perfect score! Glad you liked it Bob!
I absolutely love all of your project Vinny. Thanks for sharing.
Glad you liked it and it's my pleasure mate!
I have discovered your channel and you not even a couple weeks ago and I love you so much❤ lots of love de l'Abitibi-témiscamingue!!!
Hey thanks mate!
Love your work man ! Keep it up, discovered your channel not long ago and I love your style of videos ! I wish for your channel to keep growing ! Love from Saguenay-lac st Jean
I’m very surprised you’re not extremely popular. Keep it up man
Thanks I guess! 😅 Still rely on the algorythm for exposure!
Loved the video! Thanx for the entertainment!
Glad you enjoyed it!
you might also consider spraying the snow pusher with ceramic coating. making the surface hydrophobic will noticeably improve the efficiency
Another great video and build Viny!
Just what I needed to watch while running a long CNC program in my garage.
Glad you liked it! Hope the CNC program is running smoothly 😉
I was watching the previous videos again and wondering when you would post the next one. Thanks!
"Muy buenos videos" by the way
Thanks Carlos! 🤙
Entertaining, informative and I still need a tractor first!
We all do! 😉 Merry Christmas!
@ Merry Christmas to you and your family. Look forward to your next adventure. Your neighbor in NB.
Awesome build!
Thanks, I'm glad you liked it! 👍
awesome build
I'm glad you like it
Really nice piece. I will steal some ideas for my Loader build. :) Cool video!
Please do! It's there to be stolen! 😉
You are soooo fun to listen to!
thanks Jhon! 🤙 Glad you enjoyed!
Viny, I like your tools ;)
Bikibooboo had me laughing.
You're welcome! Glad you're enjoying the content! 👍
@@VinyB57 I always go, your humour and great ideas, that's what brings me back each time Viny!
WoW super travail et superbe vidéo, je suis jaloux de ton atelier 🤪. Je suis concepteur de poinçon-matrice. Je suis vraiment impressionné par ton travail. Je regarde tes vidéos pour m’inspirer pour mes futurs projets sur mon tracteur et pour des équipements.
Félicitations
Salut Patrice, content que mes vidéos t'inspire! Je suis aussi concepteur poinçon matrice (par la bande) disons que j'en ai fait quelque-uns pour la compagnie où je travaille, mais je suis maintenant plus spécialisé dans l'intégration robot/outillage de cellules automatisées, qui utilisent des poinçon-matrice, mais que d'autres personnes conçoivent 😅 Tu es du QC ou de France?
@@VinyB57 Au Québec, j'habite à Montréal et je travailles à Laval.
The important part about back dragging is the angle of attack.
J'aime ben l'ensemble de tes Project et video....drole et simple. Keep up the good work 😎🤙
Merci merci! 👌
Thanks Viny. Merry Christmas to you & yours. Take care & stay safe.
Thanks Doug, merry Christmas to you and yours too!
wow this is awesome
thanks!
love it... must have that welding table for a from me to me Christmas present
Nice Christmas present! 😉
Very good Viny, love it as always! Look forward to the hydraulic leak video, as i have one on my mini excavator I would love some knowledge on how to solve. 🙄
Well...I'l have to watch a few videos myself to find a path to the solution...but 🤫
@@VinyB57 I figure the valve body must have perhaps a bit too much tolerance, allowing a bit of hydraulic fluid to back flow under the weight of the machine pushing on the cylinders. I wonder if there is a 1 way valve? or backflow preventer maybe? I am not sure.
Great Job! 👍👍
Glad you liked it! 👍
Nice work Vinnie. Love the name 😂
Love the name too...I'll do anything for a joke! 🤦♂️😉
absolutely beautiful ! greetings from Poland :)
Well done sir
looks great
Thanks!
Absolutely pure entertainment
Lol I saw what you snuck in there Viny! Great video - safe holidays to you and yours!
Ah merde! I thought I was being sneaky! 😉 Happy holidays to you too!
What an awesome build. It needs a trip mechanism though. Backdragging with those cylinders fully extended means that a small lip in the driveway could bend those rods into pasta. A replaceable wear edge wouldn’t hurt either.
Well the load is in ''floating'' mode, so with the skid shoes, it should jum right on top of it!
Nice. Next is the snow flame thrower :):):)
I'll add that to the list! 😉
Belle job vieux, lâche pas!
Merci mon ami!
Nice idea! I'd try it, but, my snowfalls here West of you, are either 2 or 3 inches, or 10 to 12, plus blowing snow effect. So, it's the snowblower on the tractor or the bucket on the skidsteer for me. And iffin its just an inch or 2, I just drive over it until it packs down, thaws and turns to ice. I find it's an effective way to keep the Amazon drivers away.
Good to know! I don't get it tho...why do your comment has double spaces between each word! 🤨 Never saw that before!
@@VinyB57 Used to type script. Books, short stories, speech. Old habit. Now it's a nervous twitch.
Really Nice Video Viny.❤❤
Merry Christmas Viny and family!
Hey thanks pale! Happy Holidays to you and your family too!
18:03 I almost spat out my coffee! 😂
🤣 Sorry mate! 😅
14:30 ok ok, you really earned it. Best Regards, from Germany ;-)
Nice! 👌
Really nice job Viny! And 🇨🇦🥶🇨🇦🇸🇪🥶 yes, we have snow also...but...its not as much as it use to, or Not as freecvently as before if you go back 20 years....
But nice job, have a nice Christmas and Happy New Year and hope you will get more earth saving metal in your stocking, NO COAL! 😜 TAKE CARE!
Happy holidays Tony!
Make it fun you will Viny B. Fun you will make - Yoda
🤣👍
Like your accent and cute small french curse words.
Subscription added and comment applied ;)
Thank you 2 times mate!
I think a rear snow blade is better for smaller tractors. You have a better grip on the wheels when the snow is behind. Somehow. I have a rear snow blade and it's working very good with chains on the rear wheels
i didnt know it existed, but that is great!
time to use some of that steel to make a new steel rack vinny
you're right...the garage needs a bit of clean up!
@VinyB57 you should make it a project for us to watch :p
Nice video as usual ;) try to use compresed air to clean welding magnets ;)
Thanks for the tip! I'll try next time...maybe it will be shop tip number #115!
That's how I do it to but am going to try the wire brush tip. Thanks Viny
Thats's right, it goes into the square hole!
Yes it did!
I have to ask. What does the 57 in your logo stand for?
Ngl i kinda DIG how you went from a car channel to a tractor channel i really want more upgrdes for the tractor itself though like adding a cooler engine (like a V8) to it
ostie que tu est drôle !!! j’adore ton style de vidéo !!
Merci pour l’idée! Mon père s’est acheté un tracteur, et il aimerait bien s’en faire une gratte avec un vieux souffleur qu’il à ramassé! Ma me mettre sur le projet comme cadeau de noël 😅
Super idée! Bon projet mon ami! 👍
In the future You need wider lower v die! then you can bend wider/thicker with less tonnage. Especially when specific radius isn’t really important
Yep! I kinda have a home made die that I can insert into my bigger home die. This I was not using the insert, so I was in the wider mode, I'll think about making another wider die!
@ typical rule is 8x material thickness. But you can easily do 10 or more to cheat
I'm pretty sure you're from frostbekistan(Canada).
I'm from New england US.
Plows and buckets are still the king. What warm people don't understand is how different the types of snow are to work with. We usually get wet and heavy. I added rubber to my snowblower to throw slush 10yards.
Yep I did the same rubber trick back in a day on my old snowblower!
Exactly. On my small yard dry and light snow is just a fun excercise to do by hand, and the rare (over here) wet heavy snow wouldn't go through a small blower anyway.
Quebec ou Ontario? Tres bon travail estie.
Awesome build. Im just south of you in Vermont and we havent had any snow but a small dusting. Crazy to see how much you have there.
One question- Do you cylinders bottom out when you put the pusher in the drag position or do you still have some room left for buffering in case you hit something solid? Ive been told that back dragging on maxed out cylinders can be very hazardous to seals and pistons.
No I still have some room...but not a lot tho!
Nice video, but you should built a cab for little massey😅
I don't know if I'll build a cb for this MF...🤷♂️
next year you can make a salter
I mean...I would have the best winter-apocalyptic-tractor-setup ever with a salter!😅
Nioce!
Thanks Gavin! 👍
You may be design a wood stove for your garage.Its a new project.
Well I just bought 2 giant stainless steel tanks to turn my pool into a giant hot bath! That's for next spring, so in a way, I'll be making a giant stove soon-issh!
Hey, what's that white fluffy stuff?
Poeple that hates winter, will tell you it's white sh*t! 😅
Becebobo, : ) toi tu es un québécois certain 😄
Ahah! C'est békébobo qui m'a démasqué! 😅
I was just about to say how we shimmed the bottom die on the break when it wasnt bending true when you bust out some shims lol
That's right! Gotta shim it out! Mind reader?! 😉
@VinyB57 bro one time we were re shimming the break back 04 I was early Twentys well the shims were long strips of sheet metal well the guy I was helping was dropping them straight down on the ground and I either stept on one on the slivers of metal that was laying on the operating pedal or the corner of my steel toe timberland pros stepped on the pedal while his gloved hand was inside of the break laying on the bottom die . I seen everything in slow motion I touched the reverse button just as it touched his hand. No Injuries except my stomach I almost had to go home sick that day. He should have turned off the breaker on the machine I know that would be the first thing that I would do if I was working on a machine. Sorry for rambling lol it just shook loose that memory 😅
Snow... yeah, I remember snow. We don't get that here anymore.... something-something-climate-something... 😑
as always funny boy!! :)
Thanks! 😃
tu travaille vraiment biens man j’adore je sur de thetford toi ?
Chus pas loin! 😉
@@VinyB57 tes ou haha
@@danogrimberre2568 Désolé, ma femme veut pas que je le dise! 😅
@@VinyB57 voyon juste la ville la pour le fun
Hey Viny, I have to ask, at approx. 4:50 into the video, was that image part of the plans LOL
Don't know...remember it was AI generated...😁🙊
@@VinyB57 LOL!!
@@VinyB57lol 😂
A présent j'attends d'autres utilisations de ce tracteur comme transport scolaire, démineur, hélicoptère, lanceur de pianos ... hein ? non ?
🤣 Lanceur de piano...je note! 😂
😮💨 well its not a 3 pt hitch 360° Grading blade, but it will do 😎
(you need to go to more Farm/ag Auctions for cheap Implements lol)
👍👍👍
👌👌👌
Is your wife anything like mine? She either watches out the window laughing her a** off, (Love the name on the pusher), Shaking her head at me, or dialing 9-1 and waiting for something to happen to dial the last 1.
🤣 Can I say she's a bit of all 3! 😮🤦♂️ But she mostly laugh at me! 😉
Just think, someone who would have done this in the 50's would have used oxy & acetylene to cut and weld this mixed with pounding hot rivets.
Probably! Not sure I would have the patiente for that process tho!
Good Morning Sir 🤣👍You are OUTSTANDINGLY Very Funny 👍👍🤣🤣My Too A Like The Round Skin Surface 🤣🤣👍👍 Ok it is beeeending Now 🥴🤣👍 Yes It is not going into the moon ✨✨🚀🚀🤔🤔 OUTSTANDING Hand WArmer 🤣🤣👍👍 You have Polish the Church Dishes Pretty Well When You Burn Yourself Sir 🙏🙏😇👌🤣👍Keep WArm Sir 🔥🔥👍👍👌👌😇😇🍻🍻
Hey thanks mate, glad you liked this video! 👌
Salut!
Met un peu d'angle dans les oreilles si tu vends le plan... La plupart des machines vont se jacké sur les oreilles en reculant.. par manque de force completement étiré et de la neige pesante... Pas besoin d'etre à 45degré.. mais 2a4pouces ca comble le flottement... bref! ca fonctionne sur le tien.. belle job!
I was expecting to hear Salt-N-Pepa - Push It on the background.
Shoot, nerver even though about it! 🤦♂️
One comment and one like 👍
Nice big thanks Joseph!
Decent but looks like it wont throw any on the side so needs to push out of the road rather often. With our 30cm in one night, you wont get even length of the tractor before needing to empty and if its wet snow blower does absolutely nothing but jam things in tight. I do like the pull function but its only for machines that have hydraulics, so not really good for ATV and garden tiller type of vehicles.
Yeah, it's for hydraulic loaders for sure, not ATV or garden tiller!
1:14 I know some conspiracy theories with less holes as their official stories…
😅👍
In respect of the trailer, belt thing...couldn't you just manufacture a continuous belt, in order to save all that rewinding farting about??? Deeply appreciate your channel, by the way! Your sense of humour appeals to me and I am utterly impressed with your extremely heavy project manufacture. Those building a sine bar, or a dinky knife, should take note.
I thought he had a limited amount of the belt material
The credits rolled to quickly. Didn’t get all the names.
🤣🤣🤣🤣 But it was so easy to see!
atleast you arent making the yard an ice hockey rink
Don,t worry, I'm not...but the 50mm of rain we just received is! 🤣🤦♂️
Its Trudeaus goal to save the planet as well! One starving, homeless, sick Canadian at a time is all it will take.
joublie tout le temp que tes qc
LOL whats a snowflake
Sh*tty things, falling fro the sky! 😅
Oh please, 2” of snow
Prius with summer tires could drive through that
🤣