What!? Brad is the "mastermind" behind Team S10 and Jose is the one who gets it done with the eBay crap that inevitably arrives. A good team! Team Vargas will spend too much time working against each other.
The delay isnt how fast the auto darken activates, its how long it stays dark after your weld stops glowing. Its for when you are doing alot of stopping and starting, pulse welding.
using 3m speedglass for everything, basicly about the same just a bit smaller window. i just hate the constant dark lenses, speedglass makes starting so much better :D and the different speeds, sens and darkness settings is so nice. tho i use 12 the highest it goes for tig, damn i burn my eyes if its lower x) at 40-70amp its down to 11. gotta take care of your eyes. kinda like having em, safety first! :D
Bad ass helmet Is it just me or was the filming of the last offroad build battle a lot better. They showed both teams in the garage fabing most of the time. This build battle is mostly sponsor vids and following Vargas on his adventures. Wish you guys would show more of the builds
@@AutoBat1 you can get welders flash and blind yourself with one of the expensive fancy helmets, auto darkening helmets are a bit of a gamble considering they only protect when they have power even though they are powered by a small solar panel, knew a few people who had the battery connection come loose and lose power while welding and boom darkness goes away and you get hit right in the retina with the full force of the intense uv rays. don't get me wrong auto darkening helmets are very convenient if you go from cutting to welding often but a bit of a gamble on whether or not it will work properly when you REALLY need it, personally i like a nice passive helmet, no settings to fuck with no charging to be had just flip it down and strike your arc, then when you're done flip it up and admire your handy work.
ive asked alot of cooworkers as ive just started as a welder. they vary but they all use these kinds of masks (speedglass 3m, same kind of tech as in the vid above). the different types of welders have different amounts of uv, on a mig its ok to do like 9-10-11, but for tig they go 11 or 12 for high amp 100+, and 11 maby 10 on sub 100amp (not recommended over long periods of time will sunburn your eyes xD) keep it as dark as possible so that you barely can see where you are going and can see the puddle properly and it should be fine. did weld tig on 30min intervals for a week and i didn't ask how high he recommended the settings. ran 150amp on a 10shade. i had red and a bit sore eyes after a few days xD then i went to a 12 shade, cant see as much but its enough to get a nice weld and not get flashed or damage. back to point, no it wont do anything as long as you take care of your self. don't risk it always mask up and always use as high shade as you can handle.
All boils down to the helmet quality and condition. If had an expensive helmet un darken mid weld from a low battery. The next day my eyelids felt like i was blinking with sand paper. Wouldn't wish it on my worst enemy.
Honestly love this sort of insight (Already feels like an add though... so I wouldn’t mind it just a quick almost tech review like setting... I guess that might take away some of the charm, but just simple “it does this, this, and this” and then a quick quote or two from someone who uses it...🤷🏼♂️)
I have a digital elite with the clearlight lens and it is the best lens I have used, if I were you I would've bought the infinity with the clearlight (Edit: nevermind I thought it was the standard lens, my bad)
I get this is probably all sponsored by Miller but their is better hoods. Optrel's Panamaxx sits like goggles on your face to maximize vision range or their newest Crystal 2.0 is so clear if feels like safty glasses when you look through it.
The whole auto darkening thing was a little over done but otherwise great mask I'm sure. You can buy a 30 dollar mask that has an auto darkening feature, this miller has other features that make it as good as it is.
Sick commercial boys. Please don’t turn into MTOD.... This is literally nothing new accept this is your sponsor. Its literally $100 more than the same things on amazon for the stickers in the outside of it.
firelizard2 Roadkill was free too, I’m just saying this exactly how t started for MTOD, massive popularity spike, several shows, bring in major sponsors, then they moved to their own platform.... Trends tend to repeat them selves.
Jose needs more of the spotlight in these videos
+1 show the talent, not the characters
Welding helmets have come on loads since I went to school, used to be dark all the time.. had to learn to weld blind 🤣🤣
What are you 60?
@@nope653 no.. but I feel it man 🤣🤣
hey shit where i was working last we had the most dogshit 19$ helmets 🤣
I have a Brad helmet my self it's my left hand covering my eyes, works great 10 out of 10
moron
The delay setting is for how long you want it to stay darkened after you stop welding
I was just about to educate this dude. You struck furst.
I'm enjoying watching your good video.
I support you in Korea.
lets be real, it's "Jose vs Vargas bros feat. Bad Daddy Braddy" lol
What!? Brad is the "mastermind" behind Team S10 and Jose is the one who gets it done with the eBay crap that inevitably arrives. A good team! Team Vargas will spend too much time working against each other.
holy hell that is a sick ass piece of gear
The delay isnt how fast the auto darken activates, its how long it stays dark after your weld stops glowing. Its for when you are doing alot of stopping and starting, pulse welding.
Also that 4- technology is amazing on those helmets ❤️
Hoonigan Tool Channel, got a link to this Miller helmet?
Sticking with my 3m speedglass
Was that paid for with the 9k budget? You guys better start selling stuff 😆
Safety equipment
Sponsored advertisement commercial
@@adriane7841 why'd you write the same word three times, no need to be redundant
Thumbs up! Good stuff!
That's cool technology rules!
using 3m speedglass for everything, basicly about the same just a bit smaller window. i just hate the constant dark lenses, speedglass makes starting so much better :D and the different speeds, sens and darkness settings is so nice. tho i use 12 the highest it goes for tig, damn i burn my eyes if its lower x) at 40-70amp its down to 11. gotta take care of your eyes. kinda like having em, safety first! :D
I almost bought that one just the other day....so much visibility
That’s cool.
More José please...
Bad ass helmet
Is it just me or was the filming of the last offroad build battle a lot better. They showed both teams in the garage fabing most of the time. This build battle is mostly sponsor vids and following Vargas on his adventures. Wish you guys would show more of the builds
These are all bonus vids my guy just extra not part of the episode
so its a regular speedglas helmet with a bigger field of vision then yeah?
Awesome helmet!!!
Real question after welding for years or decades will welding affect you're vision or mess with color definition??
only if you have a cheap helmet or occasionally don't wear one
@@AutoBat1 you can get welders flash and blind yourself with one of the expensive fancy helmets, auto darkening helmets are a bit of a gamble considering they only protect when they have power even though they are powered by a small solar panel, knew a few people who had the battery connection come loose and lose power while welding and boom darkness goes away and you get hit right in the retina with the full force of the intense uv rays. don't get me wrong auto darkening helmets are very convenient if you go from cutting to welding often but a bit of a gamble on whether or not it will work properly when you REALLY need it, personally i like a nice passive helmet, no settings to fuck with no charging to be had just flip it down and strike your arc, then when you're done flip it up and admire your handy work.
ive asked alot of cooworkers as ive just started as a welder. they vary but they all use these kinds of masks (speedglass 3m, same kind of tech as in the vid above). the different types of welders have different amounts of uv, on a mig its ok to do like 9-10-11, but for tig they go 11 or 12 for high amp 100+, and 11 maby 10 on sub 100amp (not recommended over long periods of time will sunburn your eyes xD) keep it as dark as possible so that you barely can see where you are going and can see the puddle properly and it should be fine.
did weld tig on 30min intervals for a week and i didn't ask how high he recommended the settings. ran 150amp on a 10shade. i had red and a bit sore eyes after a few days xD then i went to a 12 shade, cant see as much but its enough to get a nice weld and not get flashed or damage.
back to point, no it wont do anything as long as you take care of your self. don't risk it always mask up and always use as high shade as you can handle.
All boils down to the helmet quality and condition. If had an expensive helmet un darken mid weld from a low battery. The next day my eyelids felt like i was blinking with sand paper. Wouldn't wish it on my worst enemy.
Yes.
Honestly love this sort of insight
(Already feels like an add though... so I wouldn’t mind it just a quick almost tech review like setting... I guess that might take away some of the charm, but just simple “it does this, this, and this” and then a quick quote or two from someone who uses it...🤷🏼♂️)
Link for the helmet?
m.cyberweld.com/miller-black-ops-welding-helmet-280047.html
You dont need a shade for grinding, "cut" or shade 5 is for oxy-fuel cutting only, plasma you would need shade 10 or 12
why's there like 20 people working on the Vargas car in the background?
lol both teams are just strategically playing the rules (cheating)
TheGrrrudy because it’s Vargas 😂
It's hoonigan.
Hip-Hip!
Not quite a Lincoln 3350 with 4c optics, but pretty nice.
Jose is defs the forgotten one of the 4 in B&B
Somebody read the brochure😽! 😤🍻🐈🔥🔥
Ya it typically takes me a second to see after I finish to.
so that is normal...i was worried.
The delay is for when it disengages
I have a digital elite with the clearlight lens and it is the best lens I have used, if I were you I would've bought the infinity with the clearlight
(Edit: nevermind I thought it was the standard lens, my bad)
Yeah boy
When I weld I look to the left.
garth james 😂
I get this is probably all sponsored by Miller but their is better hoods. Optrel's Panamaxx sits like goggles on your face to maximize vision range or their newest Crystal 2.0 is so clear if feels like safty glasses when you look through it.
Noti Papi Here Showing Love From NYC 🤘😎🤙
Jose should leave and join team rotary.. brad so unorganized I feel bad for Jose #💯
Its liiitttt 🔥
The whole auto darkening thing was a little over done but otherwise great mask I'm sure.
You can buy a 30 dollar mask that has an auto darkening feature, this miller has other features that make it as good as it is.
Am I the only gringo who whose like joshie? but dam miller your killing it!
Why would you ever extend the time it take to react? Surely you'd always want it instant? cheers
Team CHEVY go!
Might just have to replace my flaming skull lincoln helmet ahaha
Still waiting for some cool Hoonigan liveries on your hoods...
#ad ?
bro, link this shit in description so we can find it faster. the welder too. y'all build everything with it.
This is a commercial. Just call it what it is.
Hoonigan is turning into a big infomercial for products now huh.. where's the cars
You are one the bonus channel 🤷♀️
12 crew whats up
It's 2am ... over here
Sick commercial boys. Please don’t turn into MTOD....
This is literally nothing new accept this is your sponsor. Its literally $100 more than the same things on amazon for the stickers in the outside of it.
How much are you paying them for this content?
firelizard2 Roadkill was free too, I’m just saying this exactly how t started for MTOD, massive popularity spike, several shows, bring in major sponsors, then they moved to their own platform....
Trends tend to repeat them selves.
#climbthathillDan
It 2 am were i live i do not khow why im looking to my shooe, good info(๏_๏)
Jose is one spicy jalapeño
Viking 3350 is better
I prefer the Miller because of X-mode but to each their own
420 likes
14th comment within first 12 mins of release
Coll helmet bring alot of content smh