LINKS in the video and description - SUBSCRIBE for future videos! LEARN MORE: www.eastwood.com/eastwood-hotcoat-4x4x6-120-volt-powder-coating-booth.html?
Could this oven also be used to dry Eastwood’s Single-Stage Urethane Topcoats? I read it has a minimum temp of 200°F, product info sheet states Eastwood’s Single-Stage Urethane Topcoats may be force dried at 140°F for 40 minutes. Would 200°F be too much?
What is the best way to advertise/promote a powdercoating business though? At $10+ G for the setup (oven/booth/gun, not counting the compressor) it kinda has to pay for itself fairly quickly.
A proper social presence showing off your work and an easily found website or contact info is first step - then it's a matter of getting in front of people's eyes.
@@eastwoodco what about pricing. There's probably a million things to consider so that you know what to charge people... That's always my problem, is figuring that out
there was more orange powder on the shop floor then on the bike frame. That booth needs to be cut in half with that little bit of air flow to the filters.
Yep needs way more air flow but filters like that cake up fast and reduce the flow. If you keep the air filters new or clean with the part all the way in the booth Im sure its fine.
This setup is way too expensive... I was looking for online reviews and there aren't any at all and I'm willing to bet the price is the reason why. Also a 1 year warranty on items at this price point is an absolute joke!
I just checked the price. Its about $10k. As a hobbyist, I don't know what wife would be okay with this. It also takes up half your garage. $10k is a lot of cans of paint. Just saying.
Do not believe their satisfaction guarantee. I recently contacted their support with a simple question about an Eastwood vibratory tumbler I bought a couple of years ago. They would not help me unless I provided the telephone number associated with the order and the order number. I’ve had several phones since I bought it and cannot recall which number it was and seriously, who keeps the order number for every item they buy, especially low cost items? Eastwood, you stink and you lie.
We stand by our products and are always a call away to support regardless of warranty status, but yes it's not unlimited. Please contact customer support if you need any assistance past the 1 year warranty.
Not to be a dick it is nice but at 0:35 its not sucking enough to pull it into the filters and its going into the shop. I know the part is pulled out a bit to maybe hit the sides better but that thing needs more suction.
LINKS in the video and description - SUBSCRIBE for future videos! LEARN MORE: www.eastwood.com/eastwood-hotcoat-4x4x6-120-volt-powder-coating-booth.html?
3 Heating Elements for quick curing
35,000 BTUs is that a total of 35,000 btu or each element is 35,000 btu
How do you wire this oven up? It came with no wiring diagram. Any help will be appreciated.
Could this oven also be used to dry Eastwood’s Single-Stage Urethane Topcoats? I read it has a minimum temp of 200°F, product info sheet states Eastwood’s Single-Stage Urethane Topcoats may be force dried at 140°F for 40 minutes. Would 200°F be too much?
What is the best way to advertise/promote a powdercoating business though? At $10+ G for the setup (oven/booth/gun, not counting the compressor) it kinda has to pay for itself fairly quickly.
A proper social presence showing off your work and an easily found website or contact info is first step - then it's a matter of getting in front of people's eyes.
@@eastwoodco what about pricing. There's probably a million things to consider so that you know what to charge people... That's always my problem, is figuring that out
there was more orange powder on the shop floor then on the bike frame. That booth needs to be cut in half with that little bit of air flow to the filters.
Yep needs way more air flow but filters like that cake up fast and reduce the flow.
If you keep the air filters new or clean with the part all the way in the booth Im sure its fine.
Then don't buy it.
This setup is way too expensive... I was looking for online reviews and there aren't any at all and I'm willing to bet the price is the reason why. Also a 1 year warranty on items at this price point is an absolute joke!
I just checked the price. Its about $10k. As a hobbyist, I don't know what wife would be okay with this. It also takes up half your garage. $10k is a lot of cans of paint. Just saying.
@@MrPoPo-ct6se explain?
@@MrPoPo-ct6se it has nothing to do with having a wife. Its about common sense.
Do not believe their satisfaction guarantee. I recently contacted their support with a simple question about an Eastwood vibratory tumbler I bought a couple of years ago. They would not help me unless I provided the telephone number associated with the order and the order number. I’ve had several phones since I bought it and cannot recall which number it was and seriously, who keeps the order number for every item they buy, especially low cost items? Eastwood, you stink and you lie.
I got tecnic more cheapers than that
How much is a powder coat and sandblast that is good to start cost around ?
im looking for a powder coating job
I want this oven...hmmm
What's the price on a set up like this
You can only stand behind this booth for one year? 🤔
We stand by our products and are always a call away to support regardless of warranty status, but yes it's not unlimited. Please contact customer support if you need any assistance past the 1 year warranty.
Its 5.5k which is a rich mans tool but theres plenty of diy out there that beat this price
Not to be a dick it is nice but at 0:35 its not sucking enough to pull it into the filters and its going into the shop. I know the part is pulled out a bit to maybe hit the sides better but that thing needs more suction.
Price??
You're looking at $8000-$10,000 which is way too much
We can customize the production according to your requirements.，my WhatsApp is +8617863936297
We are one of the leading manufacturer of Powder Coating Plant..... Our company is situated at Mumbai.... please let us know if anyone is interested 😊
I'm sure 😂
Shit in a bucket! That will be better than that setup