Man O man that takes me back to being a kid making the same noise going down them hills rippin an a roarin! Of course my machines said tonka! Hahaha what fun!! Thanks for posting
We’ve got 4 657e in behind our house digging a pond, and putting in a sub division, this has to be one of the best videos of scrappers I’ve seen, thank you for making this video, also clarity is clearest I’ve ever seen. Again thanks, new sub.
We use to take Scrapers off of hills so steep that dirt would come over top of the apron and hit the back of the cab. Good video. I believe they were 651 single engine.
Probably the 50th time I've watched this vid... Makes me want to go find a place I can run a scraper... Wrenched on 627's and 637's for 20 yrs, about time to get out and break one for a change. I HATE fixing them but this looks like pure clean fun to me!
Awesome vid👌! Worked with a very well known British Scraper firm called Neil Becher on a job years ago and they use to do exactly this with 657B's & 637 Push/Pulls. They were fascinating to watch😮!!
The pile IS the fill area. The rock trucks started it and squared it out, but then another site had a couple 657s available so I put them to work. I had never intended on using scrapers hence the pile being built the way it was but as you see the twins made short work of turning it into a scraper pile.
Damn Skippy it does. But I got mad at the owner of an excavation company I worked for in Fort Worth Texas and decided one day I was gonna flip one over. And you know what? I could not do it! Very tough and cat like (excuse the pun) machines, despite looking otherwise
One final thought. Wear hearing protection. I first noticed I was losing my hearing listening to the high pitched hydraulic scream from the front power unit. Man, that's been 40 years ago but it was the best job I ever had. Movin' dirt, it don't get no better than that!
Originally this stockpile was being built with trucks, so you build it shaped like a box so the trucks can dump off the edge. Plans changed and we started moving material with scrapers which have to dump going up over the pile rather than being able to back in and dump. This forced us to round off the pile making it into an inverted U shape.
Thats a double good on that. We once had a new freeway goin through a fairly populated area and the TV cameras were there with the whinging neighbours and i got in on the act and they asked me about some stuff to which i replied "the sooner the 11,s and 51,s are in here the better" there was not 1 person in the group of 50 or so that had any clue what i was on about but it was funny as phuck to me.
i drove these 657, 637,627,651,631,terex ts14 and,ts24,they are great things to drive and can be good fun and dangerous to but what the hell magic days and worked with some of the best drivers to
Ive operated heavy equipment for half a century! YOU DON'T DRIVE THEM YOU OPERATE A PIECE OF EQUIPMENT! EVEN A MONKEY CAN DRIVE THEM! IT'S WHAT YOU DO WITH THE MATERIALS THAT COUNT! WHAT A JOKE, DRIVING!
The 657E was a hoss ! I ran these for years when they came out ! It's a crying shame that environmentalist and Dumbocrats have stopped these powerful creations! Those 3412 in front and 3408 in the back together kicked out around 1000 hp that was like a V8 gas motor on steroids! I've been around scrapers for years! These was first ones I ever seen could haul a full load heaped and shift up while going up hill! Last ones I ran where G series and they where just plain doggy! Lucky to pick up dirt down hill!
As a mechanic i hate 657e and 657k scrapers. They are piles of junk that break down all the time. The aftertreatment and electronics on the 657k drive me insane. I hate the v12 and the v8 on the 657e cause they are a pain in the ass to work on and pull. Parts and schematics are a nightmare. I do love the 657g. Easiest scraper to work on, a blend of old school and modern technology, and are more dependable. Fuck j-pipe and hoses on all 657 scrapers
So I should pay $8000 to move one plus have a mechanic pull the blade and ROPS off then install back on just for 5-6 pushes when I could just have the 657s fix it themselves?
@@anthonythorp7291 Any job is boring if you think its boring..! as young growing up in a fishing village only seeing mointains of fish that had to be cleaned-fileted-salted-salted again-packed on pallets and so on.. after 10 + years i had gladly payd for any job that didnt involve FISH. hehe i managed to make the fish factory job livable by setting personal goals, say at least 1 ton fish an hour even if the fish was small, and so on... but yes it felt like heaven when after some years i got hired by an inland farmer to remove trestumps from new fields with a 48 ton wheel loader. AT LEAST THE FIRST SUMMER I SPENDT 12 HOURS A DAY IN THAT MASKINE.. IT WAS FUN AND YOU FELT POWERFUL AND THE AIRDAMPED SEAT AND AIRCONDITION MADE ME EVEN EAT THE LUNSJ IN THE MASKINE. HEHE
@@samkom33 understood but as you say after 10 yrs, 30 for me, job gets old. Screwing around and little entertaining games are not welcome in my industry. At least with heavy equipment your view changes. I could never work in a factory my whole life but to each their own. Many have told me there's no way they'd do what I do.
@@anthonythorp7291 YES any job gets old, but my filosofy is that you have to accept the job, ore else you get bored. i agree you cant screw around and put you ore others in danger. but i have seen way to often in my 57 years what happends when bored people look more on the clock than whats happening around them. its dangerous not say paying attention if you run say a big excavator ore a building crane and say put the bucket-3 ton lumber load on top of a college worker, and so on
Love watching these giant machines "eat" hills! CAT scrapers are the best in the business and beautifully-built. 👍👍
Это же как надо идеально чувствовать габариты такой махины. Просто восторг
waiting for the chosen one to go over the top...would love the operators viewpoint..balls of steel..
In the late 90's I worked a job in Buford Ga and there were 10 655's on that job along with 777 rock trucks! Biggest machines I have ever seen!
Was that the mall of Georgia construction?
@Israel Swearingen yes it was in Buford GA.
I spent so much time as a kid watching this kind of stuff. Awesome flashback!
Awesome video! That is one machine I really would love to learn to operate. Then again, like watching it more.
These always reminded me of a mechanical land dragon the way they articulate. Coming over the hill wiggling for traction the image is solidified.
looks even crazier from this POV. lol they make driving a scraper look so friggin fun.
class as always mate! keep feedin her the good stuff
Under rated and a great machine for this type of job. Nice to see. A fair bit of earth moved there. Looks faster than a dozer to me
That looks like the sketchiest way to go about that project. Clearly they know what they are doing!
As long as the bowl is planted you can take bites out of any slope
Man O man that takes me back to being a kid making the same noise going down them hills rippin an a roarin! Of course my machines said tonka! Hahaha what fun!! Thanks for posting
Looks like so much fun. I operate a 621k and it a blast.
We’ve got 4 657e in behind our house digging a pond, and putting in a sub division, this has to be one of the best videos of scrappers I’ve seen, thank you for making this video, also clarity is clearest I’ve ever seen. Again thanks, new sub.
You making a lake
Lol,this is so cool. It works like an ice breaker.
I love these and especially those menacing Ol green terex bone shakers!
Another cool video. That looked fun!!!
love the power of engine & machine especially whistle of turbocharger boost pressure. I work abundantly for CAT 3500 series diesel engines 😎
Oop
We use to take Scrapers off of hills so steep that dirt would come over top of the apron and hit the back of the cab. Good video. I believe they were 651 single engine.
Ce travail est une véritable œuvre d'art. Bravo !
Probably the 50th time I've watched this vid... Makes me want to go find a place I can run a scraper... Wrenched on 627's and 637's for 20 yrs, about time to get out and break one for a change. I HATE fixing them but this looks like pure clean fun to me!
That's all it is. Just jeep your behind behind you and gopher it!
If you operate one like these fuckwits the only thing ull be doing is fixing them
These things are so fun to watch!
My favorite video you have made yet!! this is sick!!
I find myself once a month watching it lol
amazing to see this. i wish here in germany would such big scrapers working.
nothing better than a CAT, I know, I personally build quality engines in Seguin, Texas.
Sadly it's raining in Auckland but after seeing that I want back on! Way to go guys!
I like heavy equipment. The operator is a very good skill. Very good sound. Thank you from Japan.
Super Video !!
cool, these things are beasts
Great video!
Those guys got some big onions......awesome vid!!!!!!!
These operators are at another level!
Dont be be soft 😂
Awesome vid👌!
Worked with a very well known British Scraper firm called Neil Becher on a job years ago and they use to do exactly this with 657B's & 637 Push/Pulls. They were fascinating to watch😮!!
this was bring your inner kid to work day, you could almost hear them go WHEEEEEE.
That's what they're made for. Ride 'em, cowboys!!
Prone to tipping over. Not s good idea..
Reminds me of some folks at a seafood buffet.
I remember working them for a little while back in the 80's in Guyana
I like very much that type of work by Scraper Operater . Actually that was Dozar work .
Great Drives !!!!!!!!!!!!!!!!!- Not may left with the Balls and Logical ability
Or seat material stuck in your ass!!
I drove a 613 for a couple of years on rubbish dump/landfill work. The chance to so something like this breaks the boredom. Bet the drivers liked it.
Not a truck...drivers, so funny!
The pile IS the fill area. The rock trucks started it and squared it out, but then another site had a couple 657s available so I put them to work. I had never intended on using scrapers hence the pile being built the way it was but as you see the twins made short work of turning it into a scraper pile.
Yeah but on the other hand crashing straight walls is fun.
Those scrapers got the job done!
those diesels sound beautiful omg
Good idea for bank pushing. And you didn't need another guy or machine. Tactical maneuver success!
Extaraordinary work heavy equipment 👍
Wow!
Bet that particular job has a very high "pucker factor"!
Damn Skippy it does. But I got mad at the owner of an excavation company I worked for in Fort Worth Texas and decided one day I was gonna flip one over. And you know what? I could not do it! Very tough and cat like (excuse the pun) machines, despite looking otherwise
Amazing what those machines and some skilled operators can do!
Poor drive couplings :P They sure work em HARD AF
Great video for educational purposes
Q belleza ver esa maquinaria...
That was damn cool...
I'm almost 40 and can say this is AWESOME!!!!🤙
One final thought. Wear hearing protection. I first noticed I was losing my hearing listening to the high pitched hydraulic scream from the front power unit.
Man, that's been 40 years ago but it was the best job I ever had. Movin' dirt, it don't get no better than that!
Just like playing in the sand pit as a kid
@@mickboyce386 jmfw5i
thats beautiful man thanks for sharing that one
Another great video(y)
vraiment très impressionnant 😱Quelle maitrise pour les chauffeurs de ces monstres
A mais bela maquina que em minha infância eu ficava hipnotizado olhando... e sonhando.
There are three pedals. One for service brakes, one for rear engine and one for front engine.
I love watching these at 2x speed.
Originally this stockpile was being built with trucks, so you build it shaped like a box so the trucks can dump off the edge. Plans changed and we started moving material with scrapers which have to dump going up over the pile rather than being able to back in and dump. This forced us to round off the pile making it into an inverted U shape.
Looked like fun! Been there done that! Keep those E series in good shape, because you don't want the G series!
Wow I'm impressed at what scrappers can do.
Thats a double good on that. We once had a new freeway goin through a fairly populated area and the TV cameras were there with the whinging neighbours and i got in on the act and they asked me about some stuff to which i replied "the sooner the 11,s and 51,s are in here the better" there was not 1 person in the group of 50 or so that had any clue what i was on about but it was funny as phuck to me.
They make it look easy
Хорошо работают, дай бог каждому!!🙂
Но не дай бог тебе.
i drove these 657, 637,627,651,631,terex ts14 and,ts24,they are great things to drive and can be good fun and dangerous to but what the hell magic days and worked with some of the best drivers to
Ive operated heavy equipment for half a century! YOU DON'T DRIVE THEM YOU OPERATE A PIECE OF EQUIPMENT! EVEN A MONKEY CAN DRIVE THEM! IT'S WHAT YOU DO WITH THE MATERIALS THAT COUNT!
WHAT A JOKE, DRIVING!
Super. 💙 T.E.N.
Its almost as if their dozing that hill. Interesting technique.
cnote4461 they are absolutely dozing that hill. They appear to do more than just scrape.
What a weird and awesome machine
Would rather see D11s do this because this is what are really good at.Pushing dirt while these 657 are built for hauling dirt
The 657E was a hoss ! I ran these for years when they came out ! It's a crying shame that environmentalist and Dumbocrats have stopped these powerful creations! Those 3412 in front and 3408 in the back together kicked out around 1000 hp that was like a V8 gas motor on steroids! I've been around scrapers for years! These was first ones I ever seen could haul a full load heaped and shift up while going up hill! Last ones I ran where G series and they where just plain doggy! Lucky to pick up dirt down hill!
As a mechanic i hate 657e and 657k scrapers. They are piles of junk that break down all the time. The aftertreatment and electronics on the 657k drive me insane. I hate the v12 and the v8 on the 657e cause they are a pain in the ass to work on and pull. Parts and schematics are a nightmare. I do love the 657g. Easiest scraper to work on, a blend of old school and modern technology, and are more dependable. Fuck j-pipe and hoses on all 657 scrapers
WOW 😮
Damn those machine sure can move alot of dirt.
9ollpphhph
I think this is one of the best scraper videos on TH-cam.
NUTS! I'd have to clean my shorts, the seat and operator cab.
Coragem Parabéns a vcs pela profissão ❤
like a pack of foxes hunting down still standing chickens xD
I came here for the Cookie Monster title. Nom Nom me eats TH-cam videos!
The boys are having fun.
i 2nd that one another great vid
Шикарный способ развалить (сгладить) конус грунта, с последующим вывозом. Бульдозерами было-бы затратней!
the word: Eat Dirt, it's like a compliment to these machines
Awesome dudes
best tractors ever made
2.37 "No Fear"!!
Seabees favorite piece of equipment
Interesting to watch.
I love this angle even more....scrapers are so much fun.
YESSIR!!
CAT SKINNERS GETTING IT DONE!!
You hear that turbo? Sheeit🦴🤘
Вот это Мощь👍👍👍🙏🤝
NICE VIDEO
Wish I could find work like this in TN! I need to move North and work for kidco! Is kidco hiring, lol?
So I should pay $8000 to move one plus have a mechanic pull the blade and ROPS off then install back on just for 5-6 pushes when I could just have the 657s fix it themselves?
So are the using scrapers to basically "bulldoze" a hill? First time I've seen that. Pretty cool.
Grown men playing in the dirt. How fun
Nice to get paid for having fun
Thanks
I've run them, nothing fun about it for me.
@@anthonythorp7291 Any job is boring if you think its boring..!
as young growing up in a fishing village only seeing mointains of fish that had to be cleaned-fileted-salted-salted again-packed on pallets and so on..
after 10 + years i had gladly payd for any job that didnt involve FISH. hehe
i managed to make the fish factory job livable by setting personal goals, say at least 1 ton fish an hour even if the fish was small, and so on... but yes it felt like heaven when after some years i got hired by an inland farmer to remove trestumps from new fields with a 48 ton wheel loader.
AT LEAST THE FIRST SUMMER I SPENDT 12 HOURS A DAY IN THAT MASKINE.. IT WAS FUN AND YOU FELT POWERFUL AND THE AIRDAMPED SEAT AND AIRCONDITION MADE ME EVEN EAT THE LUNSJ IN THE MASKINE. HEHE
@@samkom33 understood but as you say after 10 yrs, 30 for me, job gets old. Screwing around and little entertaining games are not welcome in my industry. At least with heavy equipment your view changes. I could never work in a factory my whole life but to each their own. Many have told me there's no way they'd do what I do.
@@anthonythorp7291 YES any job gets old, but my filosofy is that you have to accept the job, ore else you get bored.
i agree you cant screw around and put you ore others in danger. but i have seen way to often in my 57 years what happends when bored people look more on the clock than whats happening around them.
its dangerous not say paying attention if you run say a big excavator ore a building crane and say put the bucket-3 ton lumber load on top of a college worker, and so on
Ai que saudade, pra morrer não precisa ir pro cemitério.
Cool video don't see scrapers in the uk
How do you figure?
That's what there built for. Operate them like theres no tomorrow.
CORRECT! Your operating equipment not driving a truck!
Stupid NEWBIES!
Não mim canso de esse vídeo ficou bom de mais e minha máquina preferida desde criança parabéns
PA carregadeira 😃