Budget DIY X-Bull Traction Board Roof Mount Video - Lexus GX Overland Build
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- www.TXGXOverlan...
T track roof rack systems from companies like Prinsu Designs, Front Runner, Thule and others are a great way to store off road gear on your roof but specialty t track mounts can be expensive. In this video, the TX GX uses common stainless steel hardware to easily and cheaply mount vehicle recovery traction boards like MaxTrax, X-Bull and Maxsa to the roof rack rails. The solution takes minutes to install, loads and unloads your recovery boards in seconds, and keeps your boards secure while overlanding or offroading.
Our full Lexus GX460 build sheet: txgxoverland.co...
#lexus #overland #offroad
Bolts - stainless steel 1/4” - 20 course fully threaded carriage bolt with a round head and square top. I picked mine up at Ace Hardware but here is an example (and great website): www.mcmaster.c...
5 Star Knobs - Innovative Components AN4C-5S221 1.38" Star knob thru hole 1/4-20 steel zinc insert black pp (Pack of 10) amzn.to/3l6IQ4y
X-Bull traction matt (tracks): X-BULL New Recovery Traction Tracks Sand Mud Snow Track Tire Ladder 4WD (3Gen, Orange) amzn.to/3B8dcJE
Visit us on:
www.TXGXOverlan...
Our full Lexus GX460 build sheet: txgxoverland.co...
Facebook: / txgx-460-overland-and-...
Instagram: / txgx_overland
Try our TH-cam Lexus GX Playlists:
Lexus GX Overland Build Video: • Overland Radios - Midl...
Overland Trip Videos: • 10 Water Crossings - L...
Overland Vehicle Comparisons: • Lexus GX470 vs GX460 -...
#gx #prinsudesigns #dobinsonsusa #falken #caliraised #metaltech #gx460 #gx470 #gxor #prado #lexus #offroad #affiliatelinks
Quick and easy. I use 4 bolts, 8 washers, 4 nuts, and 4 plastic knobs
Nice!
Thanks for a great video! I think your solution has got to be the most simple one I've seen, as well as cost effective! Thank you!
You bet - still works great!
This was the exact video I was looking for to the questions I had. Just purchased these same boards with prinsu rack. Thank you so much! Subscribed
Awesome - happy to help!
Thank you for this! I have the XBull boards as well and the pre drilled holes are too big for larger bolts. Didn’t want to spend money on a gear plate. This method worked like a charm. Also, in case anyone is wondering if you still have a little play after tightening the knob, adding a washer will fix it.
Good idea thanks!
Awesome video. You definitely saved me a bunch of money. I was seriously overlooking this simple solution. Thank You!!
👍👍
That’s a really good idea. I’ve got the uptop overland rack, but it functions the same way. I’ll be doing that this weekend.
Make sure you leave enough time… like at least 10 minutes!!! 😂😂😂
@@TXGX460OverlandandOffRoad Oh don’t worry, with my track record it’ll take me at least one extra trip to the hardware store, and possibly one to the ER.🙄
If you don’t go to the hardware store at least twice did you really do anything at all?
Exactly how I mounted mine👊🏼👏🏼
Are we reading the same playbook? 😂😂
@@TXGX460OverlandandOffRoad LMAO
Very nice 👍🏻 man !! Think that's how I'll Mount mine on the 4Runner ! 👍🏻😆
👍👍 still going strong!!!
Nicely done how to video ! Great channel. New sub here !
Thanks! Glad you’re here!
Thanks bro
Hope it helps!
How is this holding up on freeway speed? I have seen people using connector bar or a big washer.
Perfectly! No rattles. No flutter. Never know it’s there!
Do you have a concern that the 5 star knobs may corrode even though the carriage bolts are stainless steel? I plan on having my boards mounted yr round and hopefully hardly ever remove them. TUIA
The 5 star knobs I purchased have metal shanks that are either stainless or coated to resist rusting. I don't keep them on year round but they have had their share of exposure to the elements and no rust so far. I would think they'd be up to the job - or worst case scenario easily replaceable and inexpensive. Hope this helps!
@@TXGX460OverlandandOffRoad I purchased the 5 star knobs via ur Amazon link. I'm planning on installing two sets of traction boards flat on the OEM roof rack when I get my new LR Defender this Friday. Every month or so I'll hopefully remember to turn them a bit and give them a shot of graphite spray. Our winters are quite brutal here in Northern NY so I may end up working the 5 star knobs more frequently. ;) Thanks for the feedback! I really appreciate it.
@@JosephTMeiroseIV very cool… love how those look and of course the legacy!
How long is the carriage bolts that ur using or do u have a link of the length of the bolts that ur using exactly?
Depends on which traction boards you have and how flat they stack. With X-Bulls I believe I needed 4”
@@TXGX460OverlandandOffRoad yes I have the XBULL boards as well. Is there a link to get the 4in carriage bolts from?
@@d.xchannel5122 I haven’t tried these specific ones but here’s a link to 1/4” 20 thread 4” carriage bolt: amzn.to/3DPvhid