Merci beaucoup d'avoir fait la vidéo.Juste une question j'ai le même objectif et la bague de zoom à un peu de jeu vers la gauche et droite. Est-ce normal ? Merci beaucoup
merci beaucoup pour cette vidéo. j'avais du jeu et effectivement les vis étaient tous légèrement dévisser. grâce a votre vidéo j'ai pu résoudre mon problème qui me faisaient peur. je n'ai pas oser mettre de la colle. on verra si ça se reproduit j'en mettrais a ce moment la.
Isn't Loctite 270 a bit too strong for this application? Could it possibly result in damaging the screws, if for whatever reason they have to be taken out again? Wont medium strength 243 (blue) be a better choice for these lens screws?
Videoyu çektiğiniz için çok teşekkür ederim.Sadece bir soru aynı lense sahibim ve yakınlaştırma halkasının sağında ve solunda biraz oynama var. Bu normal mi? Çok teşekkür ederim
Hello, Pro Plus Teknik! What could be the reason for the second version of the lens not having autofocus, and if possible make a video about this problem? Thank you in advance!!!🙂
Atkreipkite dėmesį į filtro žiedo varžtus. Jei varžtai laisvi, MF žiedą galima priveržti. Nepamirškite užtepti Loctite. Tik šiek tiek ant varžto galiuko, kaip galite pamatyti vaizdo įraše
Hye! Nice vidéo ! Where did you buy the pièce that have been changed?
Cok Tesekkürler videoyu hazirladiginiz icin, ayni problem bendeki lenste de vardi. Sorun cözülmüs oldu, tekrar Tesekkürler.
Merci beaucoup d'avoir fait la vidéo.Juste une question j'ai le même objectif et la bague de zoom à un peu de jeu vers la gauche et droite. Est-ce normal ? Merci beaucoup
Je suis content que cela ait été utile.
Ce problème peut être ignoré s'il y a un certain espace dans la bague de zoom.
merci beaucoup pour cette vidéo. j'avais du jeu et effectivement les vis étaient tous légèrement dévisser. grâce a votre vidéo j'ai pu résoudre mon problème qui me faisaient peur. je n'ai pas oser mettre de la colle. on verra si ça se reproduit j'en mettrais a ce moment la.
Dear, I have screws that are conical in the head and I cannot open them. What is the solution? Thank you.
Isn't Loctite 270 a bit too strong for this application? Could it possibly result in damaging the screws, if for whatever reason they have to be taken out again? Wont medium strength 243 (blue) be a better choice for these lens screws?
Hi, is that same tighten the screw on below part for IS mark i?
Hi are they back in stock?
70-200 II or III filter ring in stock now
Videoyu çektiğiniz için çok teşekkür ederim.Sadece bir soru aynı lense sahibim ve yakınlaştırma halkasının sağında ve solunda biraz oynama var. Bu normal mi? Çok teşekkür ederim
Faydalı olmasına sevindim.
Zoom halkasında biraz boşluk varsa bu sorun göz ardı edilebilir.
Hello, Pro Plus Teknik! What could be the reason for the second version of the lens not having autofocus, and if possible make a video about this problem? Thank you in advance!!!🙂
Is there no movement?
CAN U MAKE A TUTORIAL ON HOW TO CLEAN FUNGUS IN THE FRONT ELEMENT?
I'll make a video for this topic in the future
For the screws. What are you coating them with before resembling?
Ik you alr figured it out by now but it’s locktight which is pretty mush a thin sting glue to help stop the screws from coming up again
hi sir. may i ask where can i get that front barrel from?
We sell...
lenstamiri.com/urun/yg2-2517-000/
But unfortunately we don't have stock now.
Where are you ?
Thanks so very much, my front element was loose... now its not... thx!!
Screws must be wiped and degreased before using thread locker.
Yes, that is also true, but in practice it is not so critical.
It fixes well without cleaning.
obrigado salvou minha vida!!!🥰🥰🥰🥰🥰
De nada
İhtiyacı Olanlar İçin Gayet Güzel Görsel Bir Anlatım Olmuş Teşekkürler Pro Plus Teknik.
Ačiū, labai padėjo :) vieno varžtuko atsisukimas ir jo prisukimas išsprendė problemą, MF buvo užsikirtęs.
Atkreipkite dėmesį į filtro žiedo varžtus. Jei varžtai laisvi, MF žiedą galima priveržti. Nepamirškite užtepti Loctite. Tik šiek tiek ant varžto galiuko, kaip galite pamatyti vaizdo įraše
Thread lock cannot be used in plastic parts - they are destroyed under its chemical influence
Yes, it's not plastic where the screws go in anyway.
Focus problems. My lens cant focus at 70 or close by
Hello ,
There could be many reasons for this. That's why we need to check the lens. Usually, focus problems occur when the lens is dropped.
Why this bad music that crushed the head