You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Thank you so much for this video! My turn signal bulb has been burned out for weeks. I bought a replacement bulb at AutoZone, but the technician said that he couldn't put it in for me. Then, a male friend offered to do it, but said that he would probably have to take off the headlight assembly and that it would take over an hour to do it. Well, I finally got tired of waiting on him to "find the time to do it," and found your video. I just replaced the bulb myself. It took less than 10 minutes.
You're most welcome and thank you so much for commenting and the very kind words. I appreciate it greatly. I sold this car and I wish I had not. It was a joy to drive and own. All the best.👍😀
Excellent advice, I had replaced both headlight assembly on my 2011 Hyundai Sonata and after two hours of labor, I realized that I had forgotten to install the indicator bulbs which I had left installed on the old assembly. This was going to be a nightmare dismantling the whole mask till I came across your video and boy I thank God I did, thank you.
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Thanks for this video, I too struggled to get my hand in the small opening to change the bulb so I took it to my shade tree mechanic and he said he'd have to remove the front bumper to change the bulb. Gonna try this before I pay him for all that labor.
You are welcome. I have seen cars that you have to take the whole wheel well plastic off or worse to change the light (see the GM HHR) so I am glad they actually built an access panel for it. Thanks.
had to change my turn signal bulb and had no idea how I was going to get to that bulb. your video was very informative and helpful. I was done in 10 minutes. thanks a million
Thank you for this demo, not sure if I want to try it, as the my turn signal bulb is on driver side, I live on a busy street, so I will have to go into a parking lot for safety purposes. One guy said he had to take my wheel off, but I see you really don't have to. I appreciate the time you took to show this. You make it look very easy even for a girl!
Rich, you sexy SOB! Thank you for posting this. You just made that easy. Should we give praise to Hyundai too? They actually made it easy. You just told us where to find access. Your video was tantamount though. Hyundai didn't post a video about how easy it is to change a bulb in a cage. But you did. Thanks. This is my third Sonata. I love these cars. I'm sure you do too. Have you had a pet vomit in the back seat yet? I have. The back seat comes right out. Easy! Prop it against the garage and kick on the pressure washer. The fabric in my first two was stain resistant. (Had a kid throw up in my first one.) Just like any car these days, everything is packed in tight. Seems Hyundai takes it to heart and engineers there autos to be easy to repair. Don't you agree? Again, thank you very much.
Love, love, love the Sonata especially the 2.0T turbo. Great car and I would buy it again. 33 miles to the gallon at 75+ miles an hour, oh Yea! Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
Hey Richard, Glad you have the same car as me and make these videos because good method vids are hard to find. Can you please make one for replacing the fog lights on your car?
I think it will require the removal of one of the bottom panels under the bumper. I will investigate it and see if I can do it. Thanks for the suggestion I will update you if I go for it.
Thank you! Because I'm a bigger guy that needs more room to work, I found it easier to remove the wheel instead of working around it when it was turned.
Thank you! I had no idea how my hand was supposed to get to it from the top!!! As a "mechanically challenged" individual, this was very helpful. Well done!
Wow! Imagine how many people bought the bulb after being told that? My bet is every person who believed that went straight to the dealer for $100 bulb change. Thanks.
I'll be honest, getting to it, and removing was "awkward," but doable. I was not able to get it back in. Took it to my Hyundai dealer who re-installed it, no charge.
Thank you very much for making this video! Wow would have never thought to turn the wheel to the right to get access to from underneath the vehicle. I was going to start taking the bumper off. Very tricky to get to, but thanks to you I was able to successfully replace the bulb. Saved me a ton of time. Great video Richard!
Awesome!!! I had tried removing my lights earlier and thought there had to be a simpler way.... So my problem was a little peculiar I had to prop out the nodes on the light sitting as it had partial contact... now it works perfectly... I own a 2012 2.0T Limited. AWESOME RIDE
this video was most helpful it told how to replace bulb and gave information on size bulbs. thanks this was great keep up the good work that you are doing.
Yes that is correct on the fog lights...thanks for making dis video I'm about to replace my driver side turn signal I just was wondering on how i was going to change it you made it look so ez to do...
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀
matthemong1 I understand why you might do that. Most people would be intimidated by pulling the whole lens out. Most people are intimidated by just doing their own service on the vehicle they own. I find by showing people that it can be done and that it is not impossible that get's them past the intimidation (fear) factor. Thanks for watching and commenting.
You are most welcome. I've seen videos where they tell you to do that. I didn't think ANY engineer would ever make it that hard. I'm glad to know I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
could you please make a video for replacing front turn signal (white/amber switchback led with resistors)? Seems Sonata don't have any wiring options for resistors for front turn signal lights. Suggestions please
I no longer own the car so I can not do a video for you on that but I too do not see an LED resistor solution that would not require you to do some soldering. All the best.
Hi Richard, thanks for the video. One question. I did exactly what you said not to do and unfortunately I drop the lightbulb into the wheel well area. Is it worth trying to retrieve that lightbulb or should I just let it stay there. I plan to order another housing mechanism. TOM
You could remove wheel well shroud near the front of the car and fish it out. Check it out it's not too difficult. You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Thanks for the video. I was able to exchange the driver side bulb, but I ran into a problem. The bulb has two filaments. One is brighter than the other. When my parking lights are on, the dimmer filament is supposed be the one burning, and when I turn on the left blinker, the brighter filament is supposed to be burning. But they are switched! Does it matter what way you put the bulb in? I noticed that the slots in the rubber casing allow the bulb to fit in either way? Did I do something wrong? And now, it’s in there so tight, I can’t take the rubber casing out! I’m a mess
This simple replacement cost me $475.00. I tried it but a new bulb didn't work either. I took it to the dealer who told me that they have seen this problem many times. The entire headlight assembly must be replaced because the connector inside the assembly doesn't make contact with the bulb.
Wow, that's crazy! Sorry to hear of your troubles with this. I wonder why they can't just fix the connector. Very strange. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀
Yes these are dual element bulbs. They are a marker light and a turn signal. Both functions are independent and handled by a different coil in the bulb. One could burn out and the other could continue functioning. Thanks.
Richard- thanks VERY much ! But I have a question ? I have completely finished the re-install, BUT...when I reinstalled the bulb, it was a very small turn to 'lock' it in. I am SUPER worried that its not locked in all the way. The turn signal works though. Is it relatively safe to 'assume' if the bulb is now working that I have it locked in correctly? Anyway to know for sure? THANKS !
Hello, First, I'd like to thank you for the tutorial. I however, ran into a problem. The bulb wasn't fastened in the connector correctly, and dropped inside of the headlight. Is there a way to get it out, or do I have to take it to the shop? Can I drive around with it in there?
+Zeeshan Haq I would try the Hyundai dealership to see how much they want for one. If they have a crazy price for one try your local salvage yard they probably have a wrecked auto they can pull one from. Thanks.
Perhaps you blew a fuse for the headlight system. Check your owners manual for the fuse locations. Here is a link to a digital version for the 2011 cdn.dealereprocess.org/cdn/servicemanuals/hyundai/2011-sonata.pdf Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀
If you mean the headlight bulb here is a video on that: th-cam.com/video/iiiyQnXaKSo/w-d-xo.html Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀
@@richardlloydusa thank you for getting back to me. New to utube am 75 old school. It was the turn single. I did watch on video and fixed my issue. Thanks again. Jerry
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
I tried removing mine and the bulb next to it fell out. So, if you see the other bulb move, STOP and tighten the other bulb so that it does not fall out when you are removing the bulb that needs to be replaced. The bulbs are not connected. So, when you pull one out, the other will not come out with it. th-cam.com/video/nX96fqnAOfg/w-d-xo.html
You have a different model year than mine as mine only has one bulb. I suspect someone put that other bulb in there without knowing about the hatch and failed to lock it down. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀
If you can find a 10 year old girl to do this it will be much easier since that's about all the hand space you have inside the bulb compartment. Thanks for a lousy design Hyundai !
Understood, but I've seen worse designs. For instance on a Ford Fusion you have to remove the front bumper just to START to get at the headlight assembly. Give me the Hyundai design ANY day over the Ford. No idea what they were thinking at Ford but trust me the Hyundai design is 100 times better! Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀
![[LIVE] : ONE ลุมพินี 91 | คู่เอก "คมอาวุธ vs อเล็กเซย์"](http://i.ytimg.com/vi/V0RkEfYFsgM/mqdefault.jpg)
Thanks Richard! Your vids are really well done
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Thank you so much for this video! My turn signal bulb has been burned out for weeks. I bought a replacement bulb at AutoZone, but the technician said that he couldn't put it in for me. Then, a male friend offered to do it, but said that he would probably have to take off the headlight assembly and that it would take over an hour to do it. Well, I finally got tired of waiting on him to "find the time to do it," and found your video. I just replaced the bulb myself. It took less than 10 minutes.
8 years later, still a life saver. Thank you.
You're most welcome and thank you so much for commenting and the very kind words. I appreciate it greatly. I sold this car and I wish I had not. It was a joy to drive and own. All the best.👍😀
Excellent advice, I had replaced both headlight assembly on my 2011 Hyundai Sonata and after two hours of labor, I realized that I had forgotten to install the indicator bulbs which I had left installed on the old assembly. This was going to be a nightmare dismantling the whole mask till I came across your video and boy I thank God I did, thank you.
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Thanks for this video, I too struggled to get my hand in the small opening to change the bulb so I took it to my shade tree mechanic and he said he'd have to remove the front bumper to change the bulb. Gonna try this before I pay him for all that labor.
You are welcome. You can do it. Thanks for watching please get back to us on how it went for you. All the best.
Thank you! Didn’t know about the little gate next to the tire. This was much easier than I thought it was going to be!
Great video! To avoid the issue of dropping the lamp in the wheel well, I stuffed a bath towel in the opening to fill the cavity. Problem solved.
Thank you for the great tip and watching. All the best.
life saver. I hate they design it like this. Thank you
You are welcome. I have seen cars that you have to take the whole wheel well plastic off or worse to change the light (see the GM HHR) so I am glad they actually built an access panel for it. Thanks.
Thank you - got it replaced and working again, and you saved me $ I-don't-know-how-many dollars of dealer fees. I really appreciated your video.
had to change my turn signal bulb and had no idea how I was going to get to that bulb. your video was very informative and helpful. I was done in 10 minutes. thanks a million
You are most welcome. I am happy to know that I could help you get it done. Thanks for watching and commenting. All the best.
Thank you for this demo, not sure if I want to try it, as the my turn signal bulb is on driver side, I live on a busy street, so I will have to go into a parking lot for safety purposes. One guy said he had to take my wheel off, but I see you really don't have to. I appreciate the time you took to show this. You make it look very easy even for a girl!
You are most welcome. I am sure you can do it. Thank you for watching and the kind words. I appreciate it. All the best.
Rich, you sexy SOB! Thank you for posting this. You just made that easy. Should we give praise to Hyundai too? They actually made it easy. You just told us where to find access. Your video was tantamount though. Hyundai didn't post a video about how easy it is to change a bulb in a cage. But you did. Thanks. This is my third Sonata. I love these cars. I'm sure you do too. Have you had a pet vomit in the back seat yet? I have. The back seat comes right out. Easy! Prop it against the garage and kick on the pressure washer. The fabric in my first two was stain resistant. (Had a kid throw up in my first one.) Just like any car these days, everything is packed in tight. Seems Hyundai takes it to heart and engineers there autos to be easy to repair. Don't you agree? Again, thank you very much.
Love, love, love the Sonata especially the 2.0T turbo. Great car and I would buy it again. 33 miles to the gallon at 75+ miles an hour, oh Yea! Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
Hey Richard, Glad you have the same car as me and make these videos because good method vids are hard to find. Can you please make one for replacing the fog lights on your car?
I think it will require the removal of one of the bottom panels under the bumper. I will investigate it and see if I can do it. Thanks for the suggestion I will update you if I go for it.
I did make a video on replacing the fog lights too. Here it is th-cam.com/video/ykQ58EJkD2w/w-d-xo.html Thanks.
Thank you, Richard. Very well shot, clearly narrated and useful videos. Keep it up!
***** You are most welcome. Thank you for watching and the kind comments.
The plastic screw on my car is stripped. What should I do?
Thank you! Because I'm a bigger guy that needs more room to work, I found it easier to remove the wheel instead of working around it when it was turned.
Yea I have to try that bc it was impossible for me to reach and grab the lamp.
Thank you! I had no idea how my hand was supposed to get to it from the top!!! As a "mechanically challenged" individual, this was very helpful. Well done!
You are most welcome. I am happy to hear that I was able to help you. Thank you very much for watching and commenting. All the best.
When I purchased the replacement bulb, I had to tell the parts store person that, "No, you don't have to pull the bumper off!"~~~~ *SMH*
Wow! Imagine how many people bought the bulb after being told that? My bet is every person who believed that went straight to the dealer for $100 bulb change. Thanks.
I'll be honest, getting to it, and removing was "awkward," but doable. I was not able to get it back in. Took it to my Hyundai dealer who re-installed it, no charge.
Thank you very much for making this video! Wow would have never thought to turn the wheel to the right to get access to from underneath the vehicle. I was going to start taking the bumper off. Very tricky to get to, but thanks to you I was able to successfully replace the bulb. Saved me a ton of time. Great video Richard!
Awesome!!! I had tried removing my lights earlier and thought there had to be a simpler way.... So my problem was a little peculiar I had to prop out the nodes on the light sitting as it had partial contact... now it works perfectly... I own a 2012 2.0T Limited. AWESOME RIDE
this video was most helpful it told how to replace bulb and gave information on size bulbs. thanks this was great keep up the good work that you are doing.
Thanks. Helpful for the drivers side. The passenger side is similar, but you need hands like a 10 year old girl to fit inside there.
+Frank Hooper You're welcome. It is a tight spot for sure. If you can't get at it try removing the wheel and see if that helps. Thanks.
Yes that is correct on the fog lights...thanks for making dis video I'm about to replace my driver side turn signal I just was wondering on how i was going to change it you made it look so ez to do...
I did make a video on replacing the fog lights too. Here it is th-cam.com/video/ykQ58EJkD2w/w-d-xo.html Thanks.
Very nice, the best one I seen yet
Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀
Thanks for the video! Detailed and informative.
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀
hey there i have a 2012 hyundai elantra and i just find it easier to take the whole headlight casing off when changing lights and things
matthemong1 I understand why you might do that. Most people would be intimidated by pulling the whole lens out. Most people are intimidated by just doing their own service on the vehicle they own. I find by showing people that it can be done and that it is not impossible that get's them past the intimidation (fear) factor. Thanks for watching and commenting.
Thanks! I was just about take my grill apart to pull the headlight assembly.
You are most welcome. I've seen videos where they tell you to do that. I didn't think ANY engineer would ever make it that hard. I'm glad to know I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Took five minutes. Thanks
You are most welcome. Glad I could help. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.
Thanks bro!! Saved me$$$ We family now, ride or die. 👍
You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.
thank you - this guided me to a successful light bulb change.
You are most welcome. I am happy to hear I was able to help. Thanks for watching and commenting. All the best.
Nice video but where can i find the lamp holder?
Are you talking about replacing the lamp socket? Thanks.
Richard, thank you for the video. Maybe I am not putting it back in correctly, but the light is still not turning on. What do you suggest?
Check the light outside of the assembly by just connecting it and see if it works you may have a bad lamp. Thanks.
Thank-you! That wasn't easy!
could you please make a video for replacing front turn signal (white/amber switchback led with resistors)? Seems Sonata don't have any wiring options for resistors for front turn signal lights. Suggestions please
I no longer own the car so I can not do a video for you on that but I too do not see an LED resistor solution that would not require you to do some soldering. All the best.
Richard Lloyd I see. thank you
You are most welcome. Thanks for watching.
Hi Richard, thanks for the video. One question. I did exactly what you said not to do and unfortunately I drop the lightbulb into the wheel well area. Is it worth trying to retrieve that lightbulb or should I just let it stay there. I plan to order another housing mechanism. TOM
You could remove wheel well shroud near the front of the car and fish it out. Check it out it's not too difficult. You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
thank you so much for the video, it made changing this bulb headache free
You are most welcome. I am happy to hear I was able to help. Thanks for watching and commenting. All the best.
These are very detailed instructions. Thank you for posting this.
Thanks for the video. I was able to exchange the driver side bulb, but I ran into a problem. The bulb has two filaments. One is brighter than the other. When my parking lights are on, the dimmer filament is supposed be the one burning, and when I turn on the left blinker, the brighter filament is supposed to be burning. But they are switched!
Does it matter what way you put the bulb in? I noticed that the slots in the rubber casing allow the bulb to fit in either way? Did I do something wrong?
And now, it’s in there so tight, I can’t take the rubber casing out! I’m a mess
Really well done, informative and a big time and cost saver. Thanks very much this is just what I needed.
You are most welcome. I am glad I could help. Thanks for watching and the kind comments. All the best.
Thanks for posting the video. It is very helpful. I changed mine today.
You are most welcome. Thanks for watching and commenting.
Am going to change the bulb tomorrow thanks
Thanks man appreciate the knowledge, can you please make a video about which fuses are for the signal lights or what each fuse is for what 😂
You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.
1a
This simple replacement cost me $475.00.
I tried it but a new bulb didn't work either. I took it to the dealer who told me that they have seen this problem many times. The entire headlight assembly must be replaced because the connector inside the assembly doesn't make contact with the bulb.
Wow, that's crazy! Sorry to hear of your troubles with this. I wonder why they can't just fix the connector. Very strange. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀
Are those dual function bulbs ? My position lights are out but turn signals are working. Is it light bulb or something else.
Yes these are dual element bulbs. They are a marker light and a turn signal. Both functions are independent and handled by a different coil in the bulb. One could burn out and the other could continue functioning. Thanks.
what size is the screw on the turning signal access panel ?
You are most welcome. I don't know the size of it but I used a #1 Phillips screwdriver to take it off. Thanks for watching.
Richard- thanks VERY much ! But I have a question ? I have completely finished the re-install, BUT...when I reinstalled the bulb, it was a very small turn to 'lock' it in. I am SUPER worried that its not locked in all the way. The turn signal works though. Is it relatively safe to 'assume' if the bulb is now working that I have it locked in correctly? Anyway to know for sure? THANKS !
You could check the other bulb on the other side to verify it. I no longer have the car to check. Thanks.
Thank you ever so much for developing this video procedure.
Jeff Kinder You are most welcome. Thanks for watching.
Thanks for the video. It helped a whole lot.
You are most welcome. Thank you for watching, commenting and the kind words. All the best.
Thanks I was about ready to take the whole lamp out
How come my turn signal words but the parking light doesn’t stay on in the front left side amber light
Thanks for the video.
You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
This light does stay on a lot because it also serves as a daytime running light correct?
On my car the inner set of lights closest to the grill are the daylight running lights. Thanks
Oh ok, I guess I gotta take a closer look at mine then. thanks!
Heezy75 Just start your car. Make sure it's in Park (lights off) and release the parking brake. That triggers the DRL's.
Richard Lloyd I thought the orange light at the top of the headlights were drls for some reason. Thanks for the info
Heezy75 My pleasure. Thanks for watching.
Hello,
First, I'd like to thank you for the tutorial. I however, ran into a problem. The bulb wasn't fastened in the connector correctly, and dropped inside of the headlight. Is there a way to get it out, or do I have to take it to the shop? Can I drive around with it in there?
where i could find the socket for the turn signal ??? any idea ?? have tried advance auto shops ... coudnt find any
+Zeeshan Haq I would try the Hyundai dealership to see how much they want for one. If they have a crazy price for one try your local salvage yard they probably have a wrecked auto they can pull one from. Thanks.
I change my componet and the bulb on the driver side my left turn signal still blinking fast please help me
Check the rear turn signal on the same side and make sure it's not burnt out. Also make sure both the front and rear bulbs are both working. Thanks.
Thanks for your help, I have to do same thing on drivers side.
Thank you thank you thank you. It worked just like you said.
You are most welcome. Glad I could help. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.
Awesome video. Thank you for making it.
Nailed it!!!! Thank you!
My 2014 does not have the flap
Thank you ...helped out a lot!
Thank you very much.
Anthony Rosa You are welcome. Thanks for watching.
Thanks for the helpfull video.
You are welcome. Thanks for watching.
Thanks!
You are most welcome. Thank you very much for commenting and watching. All the best.
Why would all the lights go out
Perhaps you blew a fuse for the headlight system. Check your owners manual for the fuse locations. Here is a link to a digital version for the 2011 cdn.dealereprocess.org/cdn/servicemanuals/hyundai/2011-sonata.pdf
Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀
Thank you!
You are most welcome. Thank you for watching, commenting and the kind words. All the best.
Thanks alot man
You are most welcome. Thank you for commenting. All the best.
good video, thanks
You are most welcome. Thanks for watching.
Thank you
Two thumbs up
You are most welcome. Thank your very much for commenting, watching and the kind words. All the best.
Change the headlight on a 2009 Hyundai Sonata
If you mean the headlight bulb here is a video on that: th-cam.com/video/iiiyQnXaKSo/w-d-xo.html Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀
@@richardlloydusa thank you for getting back to me. New to utube am 75 old school. It was the turn single. I did watch on video and fixed my issue. Thanks again. Jerry
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
👍
very helpful
Thank you very much.
I tried removing mine and the bulb next to it fell out. So, if you see the other bulb move, STOP and tighten the other bulb so that it does not fall out when you are removing the bulb that needs to be replaced. The bulbs are not connected. So, when you pull one out, the other will not come out with it. th-cam.com/video/nX96fqnAOfg/w-d-xo.html
You have a different model year than mine as mine only has one bulb. I suspect someone put that other bulb in there without knowing about the hatch and failed to lock it down.
Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀
If you can find a 10 year old girl to do this it will be much easier since that's about all the hand space you have inside the bulb compartment. Thanks for a lousy design Hyundai !
Understood, but I've seen worse designs. For instance on a Ford Fusion you have to remove the front bumper just to START to get at the headlight assembly. Give me the Hyundai design ANY day over the Ford. No idea what they were thinking at Ford but trust me the Hyundai design is 100 times better!
Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀
Great help!!! Thank you so much 👍🏻