Shed Find Hobao Hyper 7 Nitro RC Buggy Sat For 18 Years Will It Run?
ฝัง
- เผยแพร่เมื่อ 23 ก.พ. 2024
- This Hyper7 was in a shed loft for the best part of 18 years! Will it run?
Want to send me something? (If you're in Britain please use Royal Mail as ParcelForce keep messing up!)
My PO BOX:
Haggard RC
PO Box 1976
STANFORD-LE-HOPE
SS17 1BS
My Amazon Wish List www.amazon.co.uk/hz/wishlist/...
Join this channel to get access to perks:
/ @haggardrc
You can help me make better content by donating Via PayPal as a gift to RustySkullProductions@hotmail.com!
Or you can use this link: paypal.me/RustySkull
Every penny that is donated will go into making good quality videos for all my loyal subscribers!
Many thanks to you all :)
#NitroRC #Hyper7 #NitroBuggy #Willitrun? - บันเทิง
Put another support under that engine shelf dude, it's driving me nuts!!!!. Another great video as usual
I wedged it with a mustard tin.
I was eyeing that too lol
Thats why i got rid of it 18 years ago haha what a pain in the arse lol
😂
Hyper 7s still on sale today just proves they been tried and tested through the ages and come out on top
What kind of Warnings come on the Engine Literature, and Fuel Bottles?
I wasn't allowed to Run these Engines Indoors, when I was a "wee lad."
Good Stuff man I am out here at 9pm doing break in last tank for today though getting late cannot wait to get property to run anything anytime I feel like it most I will do it piss off the old lady lol
When I was a Kid, we weren't Allowed to run 2 Stroke Nitro Indoors.
What do these Toys pump into the Air that that Freaked out People unaffected by Shiney Things?
man i had a old team ofna hyper buggy, the best rc car i ever had, big .21 motor. she ran good.
Nice job,new o rings in the needles and you are good to go.
Nice video. Thank you for sharing mate. Wooo😊
Thanks for the content buddy, I've just got the same old Nitro 7 running after it sitting for almost 10 year. Not sure how to fine tune it though.
That's Awesome. And after 20 year's. I'd love to see it running on the ground.
Manufactured by a Taiwanese company called Hobao in 2001, the 4WD Hyper 7 Buggy model was also marketed in the USA by Ofna Racing.
BTW Mr Orinoco I used to work for both Parcelforce & Royal Mail they are the same company.
Yes they are the same company which is why I assumed they’d work together, but they don’t. As I’m sure you’ll know.
Assumptions can lead to bad things happening, as did with your delivery. I'm sorry to hear Orinoco. The stories I could tell you about them ooh my god they'd shock you. But public viewable comments isn't the place to tell/show you them.
@@stevehawking4958 This one wasn’t shipped with ParcelForce. Just ended up with them.
Yeah that happens all the time, it's the sizes and weights, if the royal mail are not happy to take it they pass it over to parcel force. Most of the time it happens at the counter when they take it of the customer. May I ask about what you said about driving heavy machinery, do you mean bulldozers & excavators ? I bet you've crushed some stuff in your time ? if you ever start a business burying EX wife's give me a call wont ya lol
@@stevehawking4958 Lol it wasn’t even posted with Royal Mail either. 😂
Harggard RC good on bax new rc buggy nice 👍 job like this video
Great Buggy the HoBao hyper tq 7 Thinking changing in mine to lrp Love the video's haggard take care mate 👍
Great video haggard as always.If you get that hyper 7 button up you will have a ripper.I would probly tear it down and redo everything but thats me.See you on the next one my friend.
finally a hyper 7 on the channel :P
About time ay 😂
@@HaggardRC love the hyper 7 haha such a good platform
Good see it run
Brilliant
Yes you can still get hyper 7 brand new with Mac 28 engine etc and these hyper buggy’s are very good and fun to play with tbh
Yes, the front wheels are turning backwards.
Backwards, like 2-Stroking Nitro-Methane into a Confined Area?
Yup.
i like the new buggy, lets see it run soon, maybe tomorrow?
Love the hyper 7 buggies
Me too!
I have one of these great cars
Nice
Ive got 2..both with mac28s on them..awesome cars
Yo Mr haggard..I've got another one..in kinda parts form..all diffs work fine...would gladly donate it to ya..love your channel.mate..I blooming love hyper 7s
You were right that was great , that looks like it's going to work great , I've now tried twice to get that 3.3 Tmaxx to run but no luck , as soon as I press the starter it floods straight away , today I went through two starter batteries and three glow starters the best I got was a couple of pops as if it was trying to start then just flooded and the motor would not turn , I'm wondering if the carb is at fault or the starter motor has no guts as you would say , I will try once more then I might fix it permanently with a bloody big hammer lol .
Haha, it could be the carb.
Take the fuel pipe off and drip a bit into the intake, see if that does anything. It’s impossible for it to flood then because the pipe’s off 😜
@HaggardRC its worth a try , just charging batteries now , I did notice on the carb the low speed needle was not flush as its meant to be , I counted around 2.5 turns to put it flush with the seat , I might try it later but all the bending has my back killing me , the engine has good compression so I believe it will go fingers crossed , thanks for replying to me , stay safe mate .
Nice bud let know like for it
Love hyper 7 I've got one idbuy off you
I have seriously hurt my finger on a starter box once because I wanted to know if these brushed motors are really that powerful 🤣
p.s. The switch was the first thing that got replaced because when I tried to turn over my motor there probably was too much current going through it that it smoked off ;) Then I took it out of the system and made an extension out of the starter-box, so I could plug my Lipo in, wich wouldnt have fit in the starter-box.
nice one mate is that's a omega 8p.21
if the start box is using 775 motor same as most drills it can go up to 12- 20v dc so any power tool battery pack or a laptop wall charger could be used to power will run at high speed the higher the voltage there should a rang that the motor can run at in the start box. a adjustable 5-24vdc 20amp powers supply that plugs in to the wall would be the best way to go 25$ can power any rc tool or part if needed
I shouldn’t think that more would fit in a drill mate
3 weeks wasn’t to bad I assume it was from Southern Ireland the Repbulic? And they charged VAT and a handling fee I suppose I just had the same thing! 👍
It was a bit of a pain lol never mind, worked out well :D
I've just found my old Hyper 7 buggy been forgotten about in garage for 15 if not 20 years... along with some 35% nitro that a quick google tells me will not be good to use... any idea what it's worth as parts/spares... or do you want it?
That 35% will be fine, don’t listen to Google.
And yes I’ll be interested in it 👍🏻
Another great video mate.!
Thanks for sharing your experience with us.!! 👍 👍 👍
Please stay safe out there & the very best wishes from Scotland 🏴 🙏 ❤️ 📻 🕹️ 🔋 🚗 🚖 🚕 🚔 🚚 🚙 🚘 🚓 🚒 🚑 🚐 🚎 🚤 🚁 🛩️ 👍 👍
You fancy fixing my hyper 7 TQ sport 😂 got a hyper 8 aswel
What's up with it? 🤣
It appears that you turned the Hi speed needle in too much, but I could be wrong,
i would use that for go cart the motor so big m8 got///// electric scooter tacks 3 12v 20 hr
front tyres need swapping round
You want to have a long fuel line so when you're car is upside down it will stay running till the corner marshel can get to it.
That’s also what clunks are for 😜
The wheel on that box is huge and probably not helping as it will be rubbing on the chassis, not withstanding the dodgy connections.
Ehyyyyyy what's up brother??
Clouds ☁️🧐
Pivot ball suspension...pbs...
Hey haggard is there anyway I could speak with you directly? I’m very new to these and I got a used one and am having issues with it. Would like to chat with you personally. I listen to a lot of your videos and I love them. But haven’t found what I’m looking for as regards to help. Please and thank you
Yeah instagram but I don't go on there much anymore.
dont forget guys WD40 is not a LUBE/OIL its a water dispercer.
That's a common myth. It displaces water AND it's a lubricant. What the lubricant is appropriate for is up to you.
@bigsmokerc that’s right.
Cant beat a hyper 7 manc
wd40 is for water displacement, not lubrication. It may loosen things up but in the end will make things worse. You are better off using that 3in1.
It quite literally says on the tin it loosens rusted nuts and bolts and stops squeaks dude
@@HaggardRCHow is that applicable to lubricating bearings? My original point stands. Using WD40 as a lubricant is generally a bad idea which was the point of my OP. Either way, nice video. I enjoyed seeing the old girl fire up.
@@2wheelLove You know me dude, acceptable is a broad word lol. As long as it loosens it up… must admit I love WD40 I use it for everything, door locks, throttle cables, hinges 😅
@@HaggardRC it's s all good m8. That whole starter box needed a tear down anyways. Lol
Please can you show me the radio wires as on mine I can’t figure it out please hagg your help is needed my friend lol
Radio wires? There are only two what’s up?
@@HaggardRC hi mate. In my radio box there’s 4 wires and I am trying to figure out the set up to get the radio gear to work with them all. Have a look at your one it’s on the hobao hyper st.
Cheers
Don’t you get what I mean mate
@scottmoffat8378 4 wires? You must have a reverse servo or something? Anyway steering is 1 and throttle is 2, battery will be Batt
Hi yeah I know that.
It looks like it goes to the switch on the top but thinking of just getting rid of it
That’s a hyper 7 pbs
An amazing buggy!
Bloody customs tax.
Bro wear mask or something because you smelling that nitro smoke in closed room not good for health.