Tekno NB48 2.1 BUILD SERIES Part 6 with Jared Tebo. Car is finished!

Part 6 of the BUILD SERIES with Jared Tebo building his new Tekno NB48 2.1 buggy. This is the final video part, the car is completed and then driven on the race track. He goes through installing the clutch on the engine, engine install, throttle and brake linkage and endpoints, steering endpoints, ride height, camber, and front toe. Watch till the end when the car hits the track. Thanks for watching and I hope you all enjoyed this video series!

[@ibdmaxin]

JTP Spit-RC lube! "Make sure you always have it!"

[@daveshank1921]

Awsome build series. Hope you can take home a win at the worlds. Really enjoyed watching all of them.

[@jaredtebo_rcmtb]

Thank you, glad you enjoyed the videos.

[@andrewmacfarlane7712]

Great build Tebo! I have been building my sons NB48 2.1 staying 2 steps ahead by watching your build content on my build breaks and a big thank you for all your hot tips and supportive info from A-Z 🏎️ best well wishes from down under for your new experience with all new companies in 23 and beyond 🔥☄️

[@jaredtebo_rcmtb]

I'm so glad to hear that these videos are helping you with your build!!! Thank you very much, I appreciate it, looking forward to 2023 for sure! Cheers!

[@egrc18]

This series has helped me so much with my own (first) build! Quick question for you, what kind of vented clutch bell are you using? Also just wanted to say thanks for taking the time to put this out, huge help!

[@DSaw78]

Thanks for the explanation and close up of how you set the linkage! Who makes that setup board?

[@jaredtebo_rcmtb]

Glad you enoyed it. It's an Avid setup board.

[@malATX]

Can't find the engine mount mentioned. Do you have a link?

[@youngsjoshua]

Can we get a run down on the tools you use? As well as any track side setup tools.

[@grantraymond3412]

Jared - just watched you’re entire build series and bought your oils/grease, servos, and fuel line.
Question - could you send me a link to all the Lunsford screws you used so I can purchase prior to my build next week along with the Lunsford titanium turnbuckles for the Tekno NB48 2.1? Would appreciate that and just wanted to make sure I purchase the right amount of screws.

[@jaredtebo_rcmtb]

Thank you so much Grant for watching the videos and supporting JTP. Unfortunately Lunsford has closed, they decided to retire. Thank you again, I hope you enjoy your JTP goodies 🤘🏼

[@grantraymond3412]

Do you recommend any other titanium screws and turnbuckles for the build? Always here to support JTP!!
Ready to move on from the 2.0 and get to building! This was very helpful and will follow your direction for top performance. I race at Indy RC in Garland so I will follow your setup there.

[@DSlite11]

im going to sleep watching this video

[@kahuna2793]

Awesome video series tebo. Can you the eb48 2.1 when you get some time I know you busy good luck at the worlds!!! What that box you use for your screws ?

[@ralleca15]

No eb48 2.1 yet.

[@jaredtebo_rcmtb]

I just got my EB kit, so I might do a build series. Those are some boxes I got from Amazon.

[@Douger318]

will that filter work on a nt 48-2.0 truggy and clear body

[@D4MI0N]

I don't use loop style tank pullers either. I've seen them get caught up and damage tanks.

[@jaredtebo_rcmtb]

Yes, sometimes they can also pop the tank lid open.

[@marcowerner8739]

If you put the clutch nut on and tighten it, doesn’t it pull the crack shaft out until its max or am I missing something here?

[@jaredtebo_rcmtb]

It is supposed to, but you just want to make sure.

[@royceracoma8864]

Don't you use a folder paper to set your mesh?