That’s awesome! I would angle them down a little for politeness. After all, you backing up not traveling. Awesome video though. It gave me a few ideas of my own.
using the painters tape as markers is a great hack I do it all thje time.. you can even use small torn pieces as it'll make a feature with the shape and easier to clean up ..
Great Job! I just recently purchased the same scanner. Would you be willing to show a little more about how you importanted the scan into Fusion 360 and used it to design?
Great video on real world usage of 3D scanner and CAD. That model had a ton of triangles, did it slow your laptop down? Back up bezels look fantastic. Those LEDs are powerful. Mahalo for sharing! : )
Luckily our laptop has a decent graphics card so it didn’t do too bad when modeling. I couldn’t change the mesh to a solid without the laptop crashing though. Looks like we need to build a PC 🤭
Brilliant process and result. I'm yet to apply to get some scans of my Ep82. Is that an aftermarket Rx7 spoiler? The beat looks amazing 😍 Awesome content bro!
Did the same thing on my car a year ago cuz i lived in a forest with no lights.... sept i just mounted an led fog light under the bumper and ran it to a relay and spliced it in to the reverse circuit, of course it wont pass inspection with that light on it 🙃, so inwas forced to take it off... the plan is to do something like this but ona civic heh.
Hey my car have lights in red which is illegal. So I created lights just like in the front of a car, making illegal white lights. This is still not up to law in any country.
If your one of those guys where some words interest you enough to make you research them then you'll understand why i did this, I searched what gaping hole was, went to images and was like "Not what i thought i'd see" and clicked off lmao. (7:50)
Could you do an in depth video of the process taking scan data and from that making the housing on fusion, i usually use creo, and it wont let me import an open mesh 🥲
Pro tip: add a switch for them in the cockpit. Great for tailgaters.
Hahahaha yes!!
That was thinking about
Bro, that is GENIUS
This actually looks better than i expected it to be great job
Thanks!
Meisters look good! Nice work on the reverse light pods too.
Thank you!
Looks great and I love the confidence to cut a hole in your car!
Thanks Dave! It definitely helps if the car is already cut up 😅😅
I love these cool car mods! Nice work!
You know what we love. You, Bao, we love you 🥰
@@IMEEMADE LOL
Rear high beams like a JDM James Bond car. Love it great work!
Drivers behind this car : "I said, ooh, I’m blinded by the lights"
That’s awesome! I would angle them down a little for politeness. After all, you backing up not traveling. Awesome video though. It gave me a few ideas of my own.
Lol yeah you’re right. It’s better to be polite. Thanks for watching!
Discovering this channel was a great way to end my night
This is the best comment ever. Thank you!
dude, another mind blowing video here... nice job.
Thank you!
Looks really futuristic and nice.. matches the car great
Thank you!
Fantastic job man 👍🏻👍🏻👍🏻
This was an excellent piece of work, especially with the extra details put in to it for better results in the rear bumper model 👍.
Thank you so much!
Awesome as always, my friend! When are we going to get a walk-through of your turbo setup? :-D
Eyyy!! Thanks for watching my dude! Soon! That’s next in the list ☺️
Clever. Very integrated.
Thanks!
I love it
Thanks!
using the painters tape as markers is a great hack I do it all thje time.. you can even use small torn pieces as it'll make a feature with the shape and easier to clean up ..
Thanks for the tip!
Great Job! I just recently purchased the same scanner. Would you be willing to show a little more about how you importanted the scan into Fusion 360 and used it to design?
Absolutely, we have a small write up on our website about the process. I can definitely add more detail regarding the fusion 360 portion!
Fantastic work!
Thanks!
Yoooo this is sick! Great job! 🎉
You’re sick
enjoyed this vid and the led tail light one got a new sub here
Thanks for watching and subscribing!
Great work, i like it. I am considering the CR for under hood scans to make an air box for an LS swap.
That sounds awesome! I would consider the CR-01 over the lizard for large area scans
Great video on real world usage of 3D scanner and CAD. That model had a ton of triangles, did it slow your laptop down? Back up bezels look fantastic. Those LEDs are powerful. Mahalo for sharing! : )
Luckily our laptop has a decent graphics card so it didn’t do too bad when modeling. I couldn’t change the mesh to a solid without the laptop crashing though. Looks like we need to build a PC 🤭
@@IMEEMADE Yeah, like me. Ha. Really, not like me. : )
How do you export to CAD file?
Can you explain in more detail about processing the scan and design? Feel like that is the most difficult part
Absolutely! Lmk if you have any object in particular you would like me to design
Awesome job!!!
Thank you!
pls post more on this car 😪 It's so rare to see someone work on a Honda Beat.
Will do!
awesome, more vids of the beat please
Coming right up!
Looks kinda cool, reverse lights not in taillights are kinda cool.
Also, those are some serious reverse lights
Lol have to make sure I can see behind me.
Damn that beat looks dope!!
Thanks!
can deodorant works to also you can use petg plastic for outdoor on cars won’t melt and can sand really well
Brilliant process and result. I'm yet to apply to get some scans of my Ep82. Is that an aftermarket Rx7 spoiler? The beat looks amazing 😍
Awesome content bro!
Thanks for watching! It’s a 326 power wing 😅
@@IMEEMADE actually love the look of the wing! loving the beat too :D must say always have a softspot for kei cars.. just need to buy myself one
Cool
there a 100% was an easier way to do this but it actually looks incredible, worth it
Not bad🔥
Please let me know ..wich program did you used with the scanner?😊
What a great video i love it
Thanks!
hey bro, dry shampoo works great too for scanning!
Thanks for the tip!
Did the same thing on my car a year ago cuz i lived in a forest with no lights.... sept i just mounted an led fog light under the bumper and ran it to a relay and spliced it in to the reverse circuit, of course it wont pass inspection with that light on it 🙃, so inwas forced to take it off... the plan is to do something like this but ona civic heh.
Awesome!
can you tell me please , what software do you use to edit the result from scaner ? thank you
Nice
Thanks!
Sheeeeeesh
You have a Honda Beat and it isn’t a feature piece of your channel????
Didn’t think it was cool enough 😅
@@IMEEMADE 😪
Would using a LIDAR sensor on the iPhone be a good substitute for the 3D scanner?
Not a bad substitute. Using polycam you can get a decent enough scan but it won’t be as accurate
How did you make it switch on when selecting reverse
I wired it to the factory reverse light wire
can deodorant works too
How you managed to print it with ASA on that ender?? :)
Temperature is at the upper limit of the hot end and it took a few tries, but it works!
@@IMEEMADE what filament did You use? ;)
There’s a link to the filament we used in the description
Hey my car have lights in red which is illegal. So I created lights just like in the front of a car, making illegal white lights.
This is still not up to law in any country.
I don’t think you really know
If your one of those guys where some words interest you enough to make you research them then you'll understand why i did this, I searched what gaping hole was, went to images and was like "Not what i thought i'd see" and clicked off lmao. (7:50)
Hahahaha, oh man....
Ni de video
Que?
Nice video, autocorrector 🥲
@@leonardoa9155 ☺ Thank you!
please, do not add music if possible. voiceover is excellent .
Noted
Could you do an in depth video of the process taking scan data and from that making the housing on fusion, i usually use creo, and it wont let me import an open mesh 🥲