I would like a reunion episode where Paereu and Rob comes and visits you and you guys talk shit and work one the house for a weekend maybe! Would love to see the crew back together :)
For the table saw a zero clearance insert would help. Also you could make a stand that goes on the end of your new bench and you can use the bench as an out feed table. Ron Paulk does the same. His stand directly attaches to the bench. This way you can just pick up the saw and throw it in the van when you need it for jobsites.
Same thought with a zero clearance, these saws don't come with much they are intended for rough jobsite work. And yeah I envisioned a larger rolling cabinet that he can drop the saw into and easily remove.
@@MikeWhitton I have pretty much the same table saw and I made my own zero clearance insert. A spot for the table saw at the end of his bench on a stand or similar would be by far the cheapest and easiest solution. Then if Scott wants to ever upgrade to a more permanent table saw for the garage then it is easy enough to alter the existing stand or build an new one.
Agreed zero clearance inserts are great. Making your own inserts is nice cause they wear and lose their effectiveness. Once you make one you can use a router pattern bit to make multiples. Zero clearance is also nice for keeping really thin cuts from getting sucked into the blade...
I'm loving your videos from your new home, but it makes me so wish I could visit the south island again. It's the most beautiful and fascinating place I've ever been to. Keep enjoying everything ♥️
Sometimes I want to leave the city and engineering behind and just work on a house and workshop like this full time. That won’t be happening anytime soon. Great one, Scott. I’ll keep living that life through you hahaha.
Do it, you won't regret it. As Rod Stewart said . "Life so brief, and time is a thief when you're undecided, like a fist full of sand it can slip right through your hand"
@@Starlight_GT Don't worry mate, I've got an old house here & a small detached garage for a "shop" (aka my tools sit in a corner and the car takes most of the space). It's not nearly as much shop space as Scott has, but that's ok! It's something!
My Pop used to have a plum tree when I was growing up. The best time of year was now, because there was a few days where the plums would be ripe enough to eat, but before the birds tore the tre apart. We'd get 100s. To many to eat, so Nan would make this unbelievable Plum Jam. Jess, get on it!!!!
C'mon Scott. I'm a mere painter who has been forced into finish carpentry and even I know how to get repeat cuts from a tracksaw.... On the paulk bench.. I built one of those as a first project from a plan. The things learned from that experience were priceless and I use them often in the field. I did have some fails because I was fresh into woodworking when I made it tho. I am going to buy plans for the newest version and even torture myself with a metric project. I cant stress how many people see that bench on the job and are blown away by the fact that im not set up on the floor. There are guys still working like that. The paulk bench is thee bench! I'm also a Stanton bench fan but, they are 2 different animals
Those plums look delicious. Makes me miss Santa Cruz. Thousands of plum trees were planted all over town and almost no one harvested them. We ate a lot of them and made jam with the rest.
I regret that I can only provide one like for the "Scott Brownie" pun. Well done, sir. This is the type of quality commentary that keeps me coming back for the next exciting video.
Paulk workbench is the nuts, use mine almost daily at work, once dog holes are done, just add 3 (400 x 1200mm) sacrificial pieces of ply/MDF for cutting full sheets. I fitted mine with simple 20mm oak pegs (2x for each piece) glued into the underside of them which correspond with the bench top, they sit there quite happily each end even with an overhang and one in the middle to stop any bowing! If you copy Ron's leg pattern (highly recommended) the upper shelf part of each pair of legs (with an extra simple shelf extension) makes for a great door support held securely with one clamp when routing hinges and morticing locks, just made fitting 23 doors on one job a pleasure! Very envious of your double garage home workshop Scott, I'm without at the mo, and have to rely on good weather, something we're lacking right now up here in the UK! Keep up the good work, looking forward to the new house renovations ;)
Scott - I have seen on Ron Polk's channel where he has that exact same or very similar compact DeWalt table saw that sits on 2 round metal pipes that stick out from his workbench; then said workbench becomes the outfeed table for the table saw.
Love this channel. So peaceful too! Smoother cuts on sheet goods can be had by making a scoring cut first about 2-4mm then back over with the through cut.Totally changed the quality of my cuts on sheet goods.
Make plum, black pepper and lime fruit paste to go with cheese and crackers..delish...... For table saw, a portable stand on lockable wheels and magnets so you can connect to your new workbench.
Building kitchen cabinets is really all about the doors... practice making a couple.... the carcasses are just simple boxes so should be no problem... Looking forward to seeing the build ..🤗 From the Emerald Isle 😎👍☘️🍺
Use the work bench as a outfeed table just like Ron does. Use the track saw to break down the plywood then fine tune with table saw. You might look into getting a Bora Centipede Workbench and buying or building a plywood tilt lift to place the plywood on the workbench. Also since you have skateboard you can use the wheels to make a plywood mover. Check out You Tuber Jay Bates for a infeed support for the table saw when you rip sheet goods.
It'd be kinda sick if you could set up some sort of pulley system next to the material storage, so you can attach that plywood suction thing to a rope, and use the pulley to lift sheets on to the bench.
This is a completely non-building comment, but make plum crumbles and freeze them for when it gets cooler. Just did the same with the plums from my brother's tree. When I renovated his kitchen a couple of years back, I found 15 x 1 kg jars of home made plum jam in his pantry that was 15 years old. Took me 18 months to get thru them, but the jam still nice :)
Could you share details of the assembly clamps you were using while screwing the bench together? The handles look like Besseys. Jealous of your garage space, mine has too much clutter!
Hi Scott, A couple of ideas 1. Make an H frame for your new bench and add casters to the bottom, save all that humping it about, you can just wheel it about the workshop instead 2. When cutting plywood I run masking tape along the cut line, this reduces tareout 3. Why not hinge your extention flaps on your smaller bench?
Enjoy the vids. Get the tso rail guide system. It’s a game changer for the track Saw. Repeatable cuts! And the tear out from your table saw; you need to make a zero clearance plate. The stock one should only be used for angled cuts. Cheers
check out the Smart Cradle that Ron makes. easily allows you to attach that specific table saw to the bench you just made. turns it into a huge outfeed table
Built my paulk bench over the summer with the table saw connected and router table./ lift built in. I just started woodworking this summer. It took me some time and one additional sheet of ply due to some mistakes, but I love that bench/work table. It really enables you to build organized and the experience of making it is probably one of the more complex things I’ve made, and what I’m most grateful for so far. Nice to give Ron credit as well 👍
For a bashy-bangy bench, one easy thing to do is to take a sheet of 1200x3600x16 MDF, halve it each way, and laminate the resulting pieces together. Legs made from 4x4s with 2x4s in a stiffening arrangement will give you a bench that is able to take the demands of chiseling, etc. Heavy though, which is the whole point, and flat. Make sure you set the legs in far enough from one end at least that you can install a face vise if you want one. For sheet goods handling, if you didn't have that free buzzy thing I would suggest a gorilla gripper, which is pretty cheap and grips the top edge of a sheet in a very nifty way. Thanks for the videos, and they are always fun! I loved the Scott Brownie comment - laughed a lot.
With your kitchen, l used a prepack group in Melbourne for the skeleton Then used some of their doors and some old stuff to give the kitchen character eg 2 17th C French doors for the pantry and frosted glass with an old bakery sign for above the fridge Cheers again Adrian Langwarrin Sth Australia
Ron AKA the young Nick Nolte.. Garage is looking Fantastic. I know exactly how your feeling, regarding having a work space at home. Congrats on the home purchase. Baby next ?
G,day Scott Brown Carpentry from Sydney Australia. Reduced chipping * Bevelled tooth saw blade * 5mm clearance blade out of board. * Tape over line for cutting * Cut oversized and machine down to line with planner or router. That's all from my bag of tricks! 🌏🇦🇺
I've purchased the same plans. Along with a few other of Ron's plans. Super cool stuff he's designed. I'm enjoying watching you built out your new shop space. I'm nearly ready to start putting my own shop together. It's been a long time coming. Mine will be smaller...much smaller than yours as I only get a portion of a two car garage. About 1/5 of the space is allowed to me. It will have to do. It will have to do... Also, I've purchased the Parf guide system you spoke of. It's all new to me, being an old school carpenter. All the videos I've seen of it make it seem very useful and highly precise, which is what I'm going for here. Especially in the small space I have I need to be innovative and efficient with every square inch. So, no cabinet saw for me. Track saw city! Thanks for taking us along in your builds!
You truly have chosen the place in NZ to call home mate....Nelson,Mapua region and n the South Island 🌴 is the ideal location in my books...the property market is pretty affordable and it’s just so much nicer than any other part of NZ...where can live and still be able to work the normal 9-5 or being self employed.....love the house you have just brought has heaps of potential and land size is great as well....good luck Scott I’m sure you can establish a carpentry/building business their on the South Island with the skills you possess mate....
Just like you, I wanted to build my own kitchen so I built a Paulk workbench and used the Parf Guide system for the dog holes. Then with some accessories I had a perfect track saw cross cut system for panels. The kitchen turned out great. The key is accurate cuts.
Your welcome to come and use our dimension saw if you decide to build your own cabinets. Gaston has my number. Good, vid, must be great to have some space after living in Auckland we take it for granted sometimes having a bit of dirt round us and a shed to work in
Hi Scott,try Peter Millard 10 minute workshop. He’s got some great stuff on his channel for making repeatable cuts using a tracksaw set up. Hope this help with your kitchen home project. Love your channel.👍👍
For your table saw how about a folding feed in and feed out table that can be packed away when not in use? You could make a cut out in the back edge of the feed in table and the leading edge of the feed out tables to accommodate the table saw and then use some latches to fix the two tables together.
Hello Scott. Have you seen paoson woodworkings channel? His method of laminating plywood strips and adding a box to make a really stable base unit with drawers works really well with a Ron Paulk bench top. David.
Hay bro I found your channel through Ron lol I’m in Christchurch and plan on redoing all my benches to Robs new and exciting new improved set up. Have all the plans and almost all the materials ready just waiting for the time to come to start. I’m also renovating my house been doing it for about 4 years now. So a bit ahead of you new roof sheets and a dorma window in.
You should look up the New Yankee Workshop. Norm Abraham is a legend, he has a quality workshop. Another great video Scott. Looking forward to see what you and Jess do with the house. 👍
good video as usual. plum jam and plum and garlic chutney. both will be delicious. a zero clearance insert for your table saw and a proper plywood blade will give you perfect cuts every time. as a retired furniture maker who occasionally uses ply, i always break down the ply with a skil saw and then do final dimensions on the table saw. i have a variation of this bench which is great for assemblies as it is beautifully flat. but you can't really pound on them. doing your own kitchen is really easy. there is nothing to kitchen cabinets, but a good table saw is a must. build your own kitchen and use the savings to get a half decent table saw. you can often get a decent used one at half the price. but new or used they will need to be set up properly.
Hey scott brownie😀....i am thinking a zero clearance insert as some others have mentioned....or maybe some zero clearance tape if you dont feel like making an insert. Fastcap sells zero clearance tape that u can use on a miter saw and i think you can use it on tablesaws as well. Cheers mate!
I would like a reunion episode where Paereu and Rob comes and visits you and you guys talk shit and work one the house for a weekend maybe! Would love to see the crew back together :)
They should all move in together make a reality carpentry show 👍🏾
I think it's awesome that you give Ron Paulk the credit and a shout out. Integrity. Well done, sir.
Jess going hard with that crushed red pepper.
For the table saw a zero clearance insert would help. Also you could make a stand that goes on the end of your new bench and you can use the bench as an out feed table. Ron Paulk does the same. His stand directly attaches to the bench. This way you can just pick up the saw and throw it in the van when you need it for jobsites.
You can find what D Hammer is talking about on Darbin Orvar's channel way back
Same thought with a zero clearance, these saws don't come with much they are intended for rough jobsite work. And yeah I envisioned a larger rolling cabinet that he can drop the saw into and easily remove.
@@MikeWhitton I have pretty much the same table saw and I made my own zero clearance insert. A spot for the table saw at the end of his bench on a stand or similar would be by far the cheapest and easiest solution. Then if Scott wants to ever upgrade to a more permanent table saw for the garage then it is easy enough to alter the existing stand or build an new one.
Bench dogs uk do a saw edge that has a low profile track saw support
Agreed zero clearance inserts are great. Making your own inserts is nice cause they wear and lose their effectiveness. Once you make one you can use a router pattern bit to make multiples. Zero clearance is also nice for keeping really thin cuts from getting sucked into the blade...
When he said "scott Brownie here" I completely lost it, that was hilarious!
Me, too :-D
Simp
Good looking work bench .. SBC
you get the like for "scott brownie here" never mind anything else. :) Thanks to both you for continuing to deliver such quality content.
Missed opportunity for 'Here; Scott's brownies!', though.
@7:37, eating nori sheets ... plain ones? Here we get them with ginger, turmeric, salt etc... really love the stuff
@2:15 Ahhh Scott rocking the vacuum holder thingy! I see a veneer vacuum project in the near future 😄
7:58 Scott Brownie..... EPIC!
🍓 🍓 🍓
How good is it to have a home workshop?!? I can tell your enjoying it haha. Loving the progress!
I was going to suggest your channel. I like your compact work area
Lol absolutely 🙂
@@evieo1086 c
Parallel guides for the track saw did the trick for me. No issues after employing parallel guides.
Awesome home workshop!! 🙌🤩⚒
Amazing work. This is by far my favorite youtube channel. Regards from Spain
Well, a workshop like that was a damn good reason to buy a house ... never seen a happier man ☺
Another vote for the Ron Paulk table saw addition. Also the router table from Ron
I'm loving your videos from your new home, but it makes me so wish I could visit the south island again. It's the most beautiful and fascinating place I've ever been to. Keep enjoying everything ♥️
Your channel is my anti-anxiety treatment. Thanks.
I built Ron’s Bench six years ago, i think everyone should build one.
Worth watching just for the Brownie joke.
And shots of... Golden Bay?
I am reminded every time he does it; I think Scott has the straightest cuts with a jigsaw I've ever seen
An out feed table and new blade will certainly help.Good video!
Sometimes I want to leave the city and engineering behind and just work on a house and workshop like this full time.
That won’t be happening anytime soon. Great one, Scott. I’ll keep living that life through you hahaha.
Sometimes that's the best we can do..... the grass is indeed greener.
Do it, you won't regret it. As Rod Stewart said . "Life so brief, and time is a thief when you're undecided, like a fist full of sand it can slip right through your hand"
@@Starlight_GT Don't worry mate, I've got an old house here & a small detached garage for a "shop" (aka my tools sit in a corner and the car takes most of the space). It's not nearly as much shop space as Scott has, but that's ok! It's something!
Nice. I built the Ron Paul’s total station in 2015. I still love it.
good to see some better weather up there for you....
My Pop used to have a plum tree when I was growing up. The best time of year was now, because there was a few days where the plums would be ripe enough to eat, but before the birds tore the tre apart. We'd get 100s. To many to eat, so Nan would make this unbelievable Plum Jam. Jess, get on it!!!!
Loving this upload schedule Scott... Finish my week of work, wake up Saturday morning, make a coffee and watch "Scott Brown here".
Good on you mate, you are a real Kiwi. Polite, soft spoken and honest.
C'mon Scott. I'm a mere painter who has been forced into finish carpentry and even I know how to get repeat cuts from a tracksaw....
On the paulk bench..
I built one of those as a first project from a plan. The things learned from that experience were priceless and I use them often in the field. I did have some fails because I was fresh into woodworking when I made it tho. I am going to buy plans for the newest version and even torture myself with a metric project.
I cant stress how many people see that bench on the job and are blown away by the fact that im not set up on the floor. There are guys still working like that. The paulk bench is thee bench! I'm also a Stanton bench fan but, they are 2 different animals
Scott Brownie here! Classic dry kiwi humour, got to love it!
Those plums look delicious. Makes me miss Santa Cruz. Thousands of plum trees were planted all over town and almost no one harvested them. We ate a lot of them and made jam with the rest.
Self install a Kaboodle modular kitchen from Bunnings Scott. They look amazing and so much more quick and easy.
Scott Brown here, was translated in the subtitles to "Let's go around here" Great videos Scott.
Man this b roll is stunning!
Can’t wait for the kitchen reno video!
Great work again, Scott Brownie
Living in New Zealand looks incredible. Great video Scott.
I regret that I can only provide one like for the "Scott Brownie" pun. Well done, sir. This is the type of quality commentary that keeps me coming back for the next exciting video.
I’m happy that you’re happy… you’re a good guy!
Paulk workbench is the nuts, use mine almost daily at work, once dog holes are done, just add 3 (400 x 1200mm) sacrificial pieces of ply/MDF for cutting full sheets. I fitted mine with simple 20mm oak pegs (2x for each piece) glued into the underside of them which correspond with the bench top, they sit there quite happily each end even with an overhang and one in the middle to stop any bowing! If you copy Ron's leg pattern (highly recommended) the upper shelf part of each pair of legs (with an extra simple shelf extension) makes for a great door support held securely with one clamp when routing hinges and morticing locks, just made fitting 23 doors on one job a pleasure! Very envious of your double garage home workshop Scott, I'm without at the mo, and have to rely on good weather, something we're lacking right now up here in the UK! Keep up the good work, looking forward to the new house renovations ;)
I've just realized (via youtube) that a solid door can be a perfect workbench. FLAT, SOLID, HEAVY. I think I'll give it a go on my next bench.
She’s going ham on the chilli flakes 😂😂
Scott - I have seen on Ron Polk's channel where he has that exact same or very similar compact DeWalt table saw that sits on 2 round metal pipes that stick out from his workbench; then said workbench becomes the outfeed table for the table saw.
Love this channel. So peaceful too!
Smoother cuts on sheet goods can be had by making a scoring cut first about 2-4mm then back over with the through cut.Totally changed the quality of my cuts on sheet goods.
This needs more up votes!
Make plum, black pepper and lime fruit paste to go with cheese and crackers..delish...... For table saw, a portable stand on lockable wheels and magnets so you can connect to your new workbench.
Hey Scott Brown love to see you make a table for your table saw to sit in...
My suggestion build a table for your table saw. Lot of ideas on TH-cam. Lets you handle larger pieces on the table saw.
Looking forward to the shop vac setup.
Your 40v collection is a thing of beauty🤩
Nothing quite like the smile on a happy carpenter's face. Enjoy that shop!
Building kitchen cabinets is really all about the doors... practice making a couple.... the carcasses are just simple boxes so should be no problem...
Looking forward to seeing the build ..🤗
From the Emerald Isle
😎👍☘️🍺
I built a 3'x6' Ron Paulk bench. Love it ! It's my favorite piece in my shop.
"Scott Brownie here" might just be my new favourite SBC moment!
Use the work bench as a outfeed table just like Ron does. Use the track saw to break down the plywood then fine tune with table saw. You might look into getting a Bora Centipede Workbench and buying or building a plywood tilt lift to place the plywood on the workbench. Also since you have skateboard you can use the wheels to make a plywood mover. Check out You Tuber Jay Bates for a infeed support for the table saw when you rip sheet goods.
Came here to say precisely this. Seconded.
It'd be kinda sick if you could set up some sort of pulley system next to the material storage, so you can attach that plywood suction thing to a rope, and use the pulley to lift sheets on to the bench.
This is a completely non-building comment, but make plum crumbles and freeze them for when it gets cooler. Just did the same with the plums from my brother's tree. When I renovated his kitchen a couple of years back, I found 15 x 1 kg jars of home made plum jam in his pantry that was 15 years old. Took me 18 months to get thru them, but the jam still nice :)
I came here to say zero clearance insert and bench for table saw with outfeed. I'm not alone in this assessment!
Another exciting episode mate 👍
Parallel guides for the track saw are a game changer Bangood sells a set that are great and cheap.
connect the table saw to the work bench.
Use the plums to make jam and chutney.
I built the Ron Paulk bench and it’s been great.
Nice, I like happy people makes me happy
Could you share details of the assembly clamps you were using while screwing the bench together? The handles look like Besseys. Jealous of your garage space, mine has too much clutter!
Window installation clamp FRK
Great job Scott 👏
Hi Scott,
A couple of ideas
1. Make an H frame for your new bench and add casters to the bottom, save all that humping it about, you can just wheel it about the workshop instead
2. When cutting plywood I run masking tape along the cut line, this reduces tareout
3. Why not hinge your extention flaps on your smaller bench?
It's a beautiful design. Nice to see you giving credit. So many people have modelled their benches and outfeed tables from his design. Brilliant.
You can make plum jelly/jam. We mix it with blackberries and it always turns out great.
Your joy and excitement are palpable. It's always a joy to watch you. Cheers!
Enjoy the vids. Get the tso rail guide system. It’s a game changer for the track Saw. Repeatable cuts! And the tear out from your table saw; you need to make a zero clearance plate. The stock one should only be used for angled cuts. Cheers
check out the Smart Cradle that Ron makes. easily allows you to attach that specific table saw to the bench you just made. turns it into a huge outfeed table
Built my paulk bench over the summer with the table saw connected and router table./ lift built in. I just started woodworking this summer. It took me some time and one additional sheet of ply due to some mistakes, but I love that bench/work table. It really enables you to build organized and the experience of making it is probably one of the more complex things I’ve made, and what I’m most grateful for so far. Nice to give Ron credit as well 👍
Just work up to all my tools stolen out of my garage. Watching you going about your day is cheering me up!! Cheers
Another good episode Scott, you need the legs to match the table saw height🪚
It's awesome that you have your own workshop now mate! Exciting times ahead!
Looking forward to the renovation videos.
For a bashy-bangy bench, one easy thing to do is to take a sheet of 1200x3600x16 MDF, halve it each way, and laminate the resulting pieces together. Legs made from 4x4s with 2x4s in a stiffening arrangement will give you a bench that is able to take the demands of chiseling, etc. Heavy though, which is the whole point, and flat. Make sure you set the legs in far enough from one end at least that you can install a face vise if you want one. For sheet goods handling, if you didn't have that free buzzy thing I would suggest a gorilla gripper, which is pretty cheap and grips the top edge of a sheet in a very nifty way.
Thanks for the videos, and they are always fun! I loved the Scott Brownie comment - laughed a lot.
Build your own cabinetry Scott, you can do it! I'll be watching every single detail so I can make mine 😆
With your kitchen, l used a prepack group in Melbourne for the skeleton Then used some of their doors and some old stuff to give the kitchen character eg 2 17th C French doors for the pantry and frosted glass with an old bakery sign for above the fridge
Cheers again
Adrian
Langwarrin Sth Australia
You should have a look at some parallel guides for the guide rail for repeatable cuts
I use a zero clearance insert on the table saw. It supports the wood fibers on the bottom of the plywood and there is no tear out.
Ron AKA the young Nick Nolte.. Garage is looking Fantastic. I know exactly how your feeling, regarding having a work space at home. Congrats on the home purchase. Baby next ?
G,day Scott Brown Carpentry from Sydney Australia.
Reduced chipping
* Bevelled tooth saw blade
* 5mm clearance blade out of board.
* Tape over line for cutting
* Cut oversized and machine down to line with planner or router.
That's all from my bag of tricks!
🌏🇦🇺
Zero clearance table saw insert helps make very nice clean cuts. :-) Hi from Vancouver, Canada
That's an utterly nice bench.
Greetings from Florida, USA 🇺🇸 Nice work! Looking forward to more videos.
I've purchased the same plans. Along with a few other of Ron's plans. Super cool stuff he's designed.
I'm enjoying watching you built out your new shop space. I'm nearly ready to start putting my own shop together. It's been a long time coming. Mine will be smaller...much smaller than yours as I only get a portion of a two car garage. About 1/5 of the space is allowed to me. It will have to do. It will have to do...
Also, I've purchased the Parf guide system you spoke of. It's all new to me, being an old school carpenter. All the videos I've seen of it make it seem very useful and highly precise, which is what I'm going for here. Especially in the small space I have I need to be innovative and efficient with every square inch. So, no cabinet saw for me. Track saw city!
Thanks for taking us along in your builds!
You truly have chosen the place in NZ to call home mate....Nelson,Mapua region and n the South Island 🌴 is the ideal location in my books...the property market is pretty affordable and it’s just so much nicer than any other part of NZ...where can live and still be able to work the normal 9-5 or being self employed.....love the house you have just brought has heaps of potential and land size is great as well....good luck Scott I’m sure you can establish a carpentry/building business their on the South Island with the skills you possess mate....
Use that shiny new bench as an outfeed table for your tablesaw
Just like you, I wanted to build my own kitchen so I built a Paulk workbench and used the Parf Guide system for the dog holes. Then with some accessories I had a perfect track saw cross cut system for panels. The kitchen turned out great. The key is accurate cuts.
Scott look at UJK parf system and adding it to your workbench you can then get very accurate repeated cuts with a track saw
Cool set up bro, greetings from Glasgow 🤙🏴
Your welcome to come and use our dimension saw if you decide to build your own cabinets. Gaston has my number.
Good, vid, must be great to have some space after living in Auckland we take it for granted sometimes having a bit of dirt round us and a shed to work in
Hi Scott,try Peter Millard 10 minute workshop. He’s got some great stuff on his channel for making repeatable cuts using a tracksaw set up. Hope this help with your kitchen home project. Love your channel.👍👍
For your table saw how about a folding feed in and feed out table that can be packed away when not in use? You could make a cut out in the back edge of the feed in table and the leading edge of the feed out tables to accommodate the table saw and then use some latches to fix the two tables together.
Hello Scott. Have you seen paoson woodworkings channel? His method of laminating plywood strips and adding a box to make a really stable base unit with drawers works really well with a Ron Paulk bench top. David.
Hay bro I found your channel through Ron lol I’m in Christchurch and plan on redoing all my benches to Robs new and exciting new improved set up. Have all the plans and almost all the materials ready just waiting for the time to come to start. I’m also renovating my house been doing it for about 4 years now. So a bit ahead of you new roof sheets and a dorma window in.
You might be thinking of the Parf Guide System for holes and bench dogs, etc. You end with with a cutting table similar to a Festool MFT...
You should look up the New Yankee Workshop. Norm Abraham is a legend, he has a quality workshop. Another great video Scott. Looking forward to see what you and Jess do with the house. 👍
Get a MFT table for repeat and accurate cuts. Peter Milliards channel has lots on MFT style workbenches etc! So accurate and can’t go wrong
good video as usual. plum jam and plum and garlic chutney. both will be delicious. a zero clearance insert for your table saw and a proper plywood blade will give you perfect cuts every time. as a retired furniture maker who occasionally uses ply, i always break down the ply with a skil saw and then do final dimensions on the table saw. i have a variation of this bench which is great for assemblies as it is beautifully flat. but you can't really pound on them. doing your own kitchen is really easy. there is nothing to kitchen cabinets, but a good table saw is a must. build your own kitchen and use the savings to get a half decent table saw. you can often get a decent used one at half the price. but new or used they will need to be set up properly.
Hey scott brownie😀....i am thinking a zero clearance insert as some others have mentioned....or maybe some zero clearance tape if you dont feel like making an insert. Fastcap sells zero clearance tape that u can use on a miter saw and i think you can use it on tablesaws as well. Cheers mate!