YES, When my kids where under the age of 6, I would open up every drawer just to see if they had gotten into them. Just a Dady thing for me. Speaking of Dad, he welded everything with stick, just be prepared to clean up a little more. Hope the old gas doesn’t mess up your clean up of the carbs.
Great job mate. Your right about not being able to stick weld alloy but you can steel. It's practise mate. I can do it safely but it never looks great like the pros
Hello there, I was wondering if you know how to change gear oil? I can't find drain bolt everywhere.. I know how to fill it up, just don't know how to drain it. Looked everywhere online, nothing! Would be a great help thanks!
I couldn’t find it either but what I done was get the top of a spray bit of any old squirty bottle then put it in the top up hole and squirt it all out then as soon as it’s all gone out put ur fresh gear oil in hope this helps bud and don’t forget to subscribe 👌🏻
@@DTMotorcyclesEssex Thanks for getting back to me! I have been checking all around where dipstick is. Been undoing bolts by wheel and nothing. checked manuals online and still nothing! I am going to take of crankcase tomorrow, and see if it is there. If not, I am gonna use your method. Thanks again. Subscribed!!
Make sure the kids don't inhale too much brake cleaner :-) But seriously ... they'll grow up knowing all the stuff you know. Say, when my starter starts but doesn't turn the motor, sort of just revvs high .. what does that mean? Mine does that like every other starting attempt.
It might be that u need a new starter bendix I had a similar problem on a piaggio Liberty it would pick and choose when it wanted to actually start and make some weird noise and I changed starter bendix and it was fine after
![โอ้เธอช่าง... - บี้เดอะสกา ft. ต๋อง เทวัญ (Prod. by ป๋าเพชร) [Official MV]](http://i.ytimg.com/vi/zbWhiLFmVL0/mqdefault.jpg)
YES, When my kids where under the age of 6, I would open up every drawer just to see if they had gotten into them. Just a Dady thing for me. Speaking of Dad, he welded everything with stick, just be prepared to clean up a little more. Hope the old gas doesn’t mess up your clean up of the carbs.
I drained all the old fuel and put new fuel in then drained that out the fuel pipe to try clean the pipe as well it should be ok now hopefully 👌🏻
Nice work Dan 🤙
Good down to earth guidance
Great job mate. Your right about not being able to stick weld alloy but you can steel. It's practise mate. I can do it safely but it never looks great like the pros
I’m not very confident when it comes to welding but practice will hopefully sort that out thanks Charlie 👌🏻
Hello there,
I was wondering if you know how to change gear oil? I can't find drain bolt everywhere.. I know how to fill it up, just don't know how to drain it. Looked everywhere online, nothing! Would be a great help thanks!
I couldn’t find it either but what I done was get the top of a spray bit of any old squirty bottle then put it in the top up hole and squirt it all out then as soon as it’s all gone out put ur fresh gear oil in hope this helps bud and don’t forget to subscribe 👌🏻
@@DTMotorcyclesEssex Thanks for getting back to me! I have been checking all around where dipstick is. Been undoing bolts by wheel and nothing. checked manuals online and still nothing! I am going to take of crankcase tomorrow, and see if it is there. If not, I am gonna use your method. Thanks again. Subscribed!!
@@danielhardcastle4362 thanks a lot mate 👊🏻
Make sure the kids don't inhale too much brake cleaner :-)
But seriously ... they'll grow up knowing all the stuff you know.
Say, when my starter starts but doesn't turn the motor, sort of just revvs high .. what does that mean?
Mine does that like every other starting attempt.
It might be that u need a new starter bendix I had a similar problem on a piaggio Liberty it would pick and choose when it wanted to actually start and make some weird noise and I changed starter bendix and it was fine after