I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! Thanks for watching and supporting me. Thanks a lot!!!
Hey Idol m new to your channel,please show me how you've done the attachment to the connector of its carbon brush..How do I repair my own with the same parts as this...Thank You and please..
Nice work BUT the parcel was not sent by Mr. Daniel from Los Angeles. If you are wondering why then take a look at the power cord, it is not for 110V American socket, it is for 220V-230V. so there is no need to exaggerate with your skills, we have noticed that you are good doing restorations, but dont try to say that people from other countries are sending you to restore their tools.
The main shaft of the hammer drill is still full of black carbon need to clean inside. Good in painting. You showed every single nuts and bolts to the camera but what exactly is needed comes to ZERO
I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! Thanks for watching and supporting me. Thanks a lot!!!
Interesting how he plugs it in to see if it works, and it doesn't. He then cut the cord wire for no reason that we can tell and takes it apart. He paints it, cleans it up, greases it, reassembles it with a new cord snd it works. What did he do to fix it because it didn't work, was it the cord ? No one knows. He did't test the motor to see if that was the problem, he just cleaned it. Not impressed. These are all his videos.
So you like to tell me that someone from USA send to you electric power tool ( which brand new is like 40$ max, cheap chinese crap ) and you had disassembled everything? Just buy him a new one , or skip that part with “ sending from usa and stuff “
Very disappointed I really like this show but its a lie. First this tool in not from the US wrong make for the US and its 220 - 230 volt we have 110 volt for hand tools. Our 220 outlets are nothing like that. I think ill move on.
MARAVILLOSO TRABAJO 👋👋👋👍👍
Thank you very much. Please follow and support us!
اللهم صل على سيدنا محمد وعلى ال محمد كما صليت على ابراهيم وعلى ال ابراهيم انك حميد مجيد❤
Best & Detail video, good work, my buddy........👍👍👍👍👍👍👍👍👍👍👋👋
Thank you very much. Please follow and support us!
Nice amazing restoration
Thank you very much. Please follow and support us! Wish you good health.
गुड जॉब विनोद कुमार फ्रॉम भारत दिल्ली (इंडिया )
Thank you very much. Please follow and support us!
انه عمل جيد و ماهر نرجوا منك أن تبعث لنا. المخططات من فضلك و شكرآ
Amazing restoration
Thank you very much. Please follow and support us!
10/10 for the painting
👍thanks for video 🌷🌷🌷
😂🎉
Onde encontrar peças para este martelete
سلام عليكم محبا يا صديقي المحترم
Thanks for watching and supporting me. Thanks very much!!!
Otimo video e teste...
You only showed dismantled and assembled process. No repairing shown. Bạn chỉ cho thấy quá trình tháo dỡ và lắp ráp. Không sửa chữa hiển thị.
Yes he showed. Changed brushes
This was excellent. You really went all out. Love the result. 🥰🥰🥰
Thanks for watching and supporting me. Thanks very much!!!.
Looolll not even replaced the bearings
👍👍👍👍👍👍
Excellent work, thank you for your help.
"City" is California, "County" is United States? LOL!! Great restoration. Thanks for saving another old tool from the scrapper.
ㅣㅣ
OK good job 👍👍👍👍👍
Trabaja muy bien,y sobre todo con una gran limpieza que le destaca
.
Thanks for watching and supporting me. Thanks very much!!!
Super Gemacht, Danke
Wow 🤩 Amazing video very goooood Brother
Another fantastic repair on this hammer drill. Like the colors too. Look forward to the next project. Thanks for sharing.
Thanks for watching and supporting me. Thanks very much!!!
Excellent job. Works great!!
Thanks for watching and supporting me. Thanks very much!!!
Nice video and restoration mate. Keep going 👍👌
Thanks for watching and supporting me. Thanks a lot!!!
Miy buen restaurador pura vidA cost.rica
Muito bom parabéns. Aqui no brasil tem desses sendo vendidos.mas nao tem ninguem com mão de obra especialisada.na restauraçăo uma pena
Thank you very much. Please follow and support us!
😮😮🔧🔨💪💪👍👍👍👍
Nice Restoration
THX Bro
*LIKEEEE 💥💯👍*
Thanks for watching and supporting me. Thanks a lot!!!
you doing will.
we love you.
Thank you very much. Please follow and support us!
I really enjoy to watching this video.. keep it up....next {Bosch 11E } restoration video please....🎉 From INDIA...
Thanks for watching and supporting me. Thanks a lot!!!
Good work
Thanks for watching and supporting me. Thanks very much!!!.
@@restorationsskills4967 yes sir
@@restorationsskills4967 big fan sir
Boa tarde seus vídeos são muito bons
C'est bien restauré
Amazing restoration. Never heard of the city Califorlia :o)
Another fake video. The Drill is not from the USA because the electric plug isn't 60 amp/ 120 volt.
👍🏻👍🏻👍🏻👏🏼👏🏼👏🏼
..the wire from the stator that forms circle-like spring to be connected to the terminals of the carbon brush..
After all, the only thing that hammer needed was new brushes. And some vaseline.
You're really have a unique taste of color
Thanks for watching and supporting me. Thanks a lot!!!
Top 👏👏👏👏👍👍💯🇧🇷
Thanks for watching and supporting me. Thanks very much!!!
太棒了
Thank you very much.
Great videos! What type of primer and paint do you use? Any adjustments for spray gun allpication?
I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! Thanks for watching and supporting me. Thanks a lot!!!
Nice 👍🏻👍🏻 🇮🇳 Kuki 09|06|2022
Thanks for watching and supporting me. Thanks a lot!!!
Em trai nay nguoi Vietnam ma dung khong.
Thank you very much.
Tengo un rotomartillo descompuesto Milwaukee enciende pero no golpetea como le hago para mandárselo para que lo arregle
Hey Idol m new to your channel,please show me how you've done the attachment to the connector of its carbon brush..How do I repair my own with the same parts as this...Thank You and please..
Supiri
Thank you very much.
I don't know what's wrong with this helmet. Just take it apart, clean it, and install it. It's a simple job
4:30 Конечно-конечно, всё разобрать, щётки не снять, а потом якорь вынимать. Это трэш...
Это ж куда отправляют на рестоврацию из Калифорнии? В Китай или в Камбоджу? Не могу определить.
Trabalho expetacular....
بسم الله الرحمن الرحيم
قل هو الله احد الله الصمد لم يلد ولم يولد ولم يكن له كفوا احد
صدق الله العلي العظيم
Why there are two senders? One from California and one from Los Angeles. One sent the hammer and one the box?
So if the hammer drill comes from a US citizen, why does it have a European plug?
🙏🤗
Thanks for watching and supporting me. Thanks a lot!!!
Nice work BUT the parcel was not sent by Mr. Daniel from Los Angeles.
If you are wondering why then take a look at the power cord, it is not for 110V American socket, it is for 220V-230V. so there is no need to exaggerate with your skills, we have noticed that you are good doing restorations, but dont try to say that people from other countries are sending you to restore their tools.
I apologize for the mistake if I did in this restore!!! Thanks for watching and supporting me. Thanks a lot!!!
Wow
Thanks for watching and supporting me. Thanks very much!!!
This brand not sold in United States and the outlet plug is different than USA style
Thanks for watching and supporting me. Thanks very much!!!
To much colors, everything simple is beautiful
Thank you. Wishing you and your loved ones good health. Always follow and support us!
Can flash on the screen the names of every parts, for all the new learner like me.
The main shaft of the hammer drill is still full of black carbon need to clean inside. Good in painting. You showed every single nuts and bolts to the camera but what exactly is needed comes to ZERO
Thanks for watching and supporting me. Thanks a lot!!!
Самый эпичный момент: 24:56
А представляете, если буром бОльшего диаметра?
Vãi cả ca li phọt ni a
I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! Thanks for watching and supporting me. Thanks a lot!!!
,🥰🥰🥰🥰
Interesting how he plugs it in to see if it works, and it doesn't. He then cut the cord wire for no reason that we can tell and takes it apart. He paints it, cleans it up, greases it, reassembles it with a new cord snd it works. What did he do to fix it because it didn't work, was it the cord ? No one knows. He did't test the motor to see if that was the problem, he just cleaned it. Not impressed. These are all his videos.
Thanks for watching and supporting me. Thanks very much!!!
ভাই আমার ঢিল ঘুরে হেমার মারেনা কেনো
hahha
Зачем было красить его как попугая? Покрасил бы в 2 цвета и красивее будет
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🆗🆗🆗🆗🆗🆗🆗🆗
Thanks for watching and supporting me. Thanks very much!!!
So you like to tell me that someone from USA send to you electric power tool ( which brand new is like 40$ max, cheap chinese crap ) and you had disassembled everything? Just buy him a new one , or skip that part with “ sending from usa and stuff “
Very disappointed I really like this show but its a lie. First this tool in not from the US wrong make for the US and its 220 - 230 volt we have 110 volt for hand tools. Our 220 outlets are nothing like that. I think ill move on.
I apologize for the mistake if I did in this restore!!! Thanks for watching and supporting me. Thanks a lot!!!
តើ
thats not worth the shipping to you. haha
Thanks for watching and supporting me. Thanks very much!!!
Еноты полоскуны...в зачем вы его разбирали то?)))ни сальники ни потшипники не поменяли😂 клоуны