This video solved my problems on my new sewing machine. I completed a work order because I thought it was the machine. I was so happy to fix the problem from watching the video. Thank you 🙏!!
I would like a video on setting bottom (bobbin) tension. I just got my machine back from a factory service which is very expensive because of shipping. The first thing I did was check how they set the tension. It was significantly tighter than common wisdom for setting bobbin tension. Other videos say "you don't need to worry about setting it... but obviously stick quality is highly dependant on dealing this tension in properly. It seems to me that if the tension is too light, the thread will float on top of the fabric. Of course--if fabric floating above the surface of the fabric is caused by another issue... please include that .
I'm so glad I saw this video! I just started to put my LSZ-1 together (after letting it sit in the corner for over a year, untouched) and I discovered what was wrong with the old machine I threw away. Simple adjustments. Now with this new one I can do all the projects that I am planning. Sailboat rebuild, sail making, furniture rebuild and upholstery, light leather work but first new cushions for the mission chair I made. Great video. Thanks. It's also nice that I live only 15 miles from your shop.
We are so glad that this video helped you figure out some adjustments for the Ultrafeed and other brands of sewing machines. We want you to be proficient and confident when it comes to using your sewing machine. When you start your many projects, if you have any questions or problems let us know, we are glad to help. THANKS!!!!
Awesome thanks 🙏🏻 the Decorative cap had me all messed up - or + ugh taking it off and losing it up and just slowly tighten saving me from pulling my hair out!!!
“Righty-tightie. Lefty-loosie.” Turning the dial (or most screws) clockwise, or to the right, tends to tighten things. Turning counter clockwise (to the left) will loosen.
I appreciate you reminding us of this basic yet essential knowledge. It's easy to forget these simple concepts, so thank you for bringing it back to our attention!
So why did you not show the symptoms when the bobbin leaf spring is too loose or too tight. On my other home use sewing machine the directions were to hold the thread and snap it with a downward motion similar to using a yo-yo. It should spool out about 4 inches of thread. Is this a good rule of thumb for the lsz1?
Do you ever have a situation where the tension seems too high on upper thread (showing knots on top stitch) but as soon as you back it off a hair it then loops on top? Bottom looks good. I've swapped needles (#18), and replaced the spring cap on bobbin carrier assembly as well as clean and oil the assembly. I'm using a V69 Poly thread, 18 needle on 500D cordura. Acts the same w 600D Ottertex or a combination of the 2. I'm leaning towards a cheap chinese thread as the culprit, don't seem to be an issue when I use a Bonded nylon v69 T70 thread, same set up as above. Thanks for all of your help. EDIT: LSZ1
So much help on this video. I bought the ls1 4 months ago and each time I do the sewing i can see knots on both sides especially when am sewing two layers of ripstop fabric or any other thick fabric. Does this mean that both tensions are ok? From Africa Zambia!!
True, if the knot is on the top and bottom side and you are working with a very light weight fabric, like ripstop, then tension is probably correct. However, switching to a lighter thread and needle may keep the knot in the center of the thin assembly.
If this is a Sailrite Sewing Machine, simply email us at info@sailrite.com and we will email you an unlisted video to help fix that issue. We look forward to working with you to fix the issue.
Can someone please confirm (because I don't want to mess up my settings too much), counterclockwise loosens the pressure foot tension and clockwise tightens? Righty tighty lefty loosey? This is not spelled out in the manual (unless I overlooked it). Thanks!
Easy to resolve... Simply roll the balance wheel towards you until the take up arm is on its way up and is almost at its highest position up. Now, the loop of thread which was moving around the bobbin is released. No more third string when removing fabric from machine.
Re threaded and reinstalled bobin 5 times, top stitch looks good bottom is a rats nest, so frustrated, just got machine. V92 thread #18 needle, cant figure out what is wrong
@@samcox866 Sam, did you email support@sailrite.com for help, if so, you will have a support case number. Can I have the support case number and I will check on the status for you?
@@SailriteDIY i have had the machine for about a year now and for the 90 minutes of sewing i do each month i spend about 9 days dialling in the machine. The ls1 has been an absolute lemon. I suspect that it had a very serious drop in transit.
Wow, it's a perfect video to explain tension on a sewing machine. Everybody should watch this. Thank you.
Glad you liked it.
This video solved my problems on my new sewing machine. I completed a work order because I thought it was the machine. I was so happy to fix the problem from watching the video. Thank you 🙏!!
It's videos like this that sold me on the Ultrafeed machine for marine canvas work. Thanks, Sailrite!
R
Thanks a million! I thought it was something I was doing.
It’s big learning curve and your videos are a great help.
Great machine!
I would like a video on setting bottom (bobbin) tension. I just got my machine back from a factory service which is very expensive because of shipping. The first thing I did was check how they set the tension. It was significantly tighter than common wisdom for setting bobbin tension.
Other videos say "you don't need to worry about setting it... but obviously stick quality is highly dependant on dealing this tension in properly. It seems to me that if the tension is too light, the thread will float on top of the fabric. Of course--if fabric floating above the surface of the fabric is caused by another issue... please include that .
Fantastic!!! I have the blue one which I used to make purses/bags. Great machine and great customer service!!!!!
Thanks for your positive comment. We are glad you like your Sailrite Ultrafeed LSZ-1 Sewing Machine.
Your theory is good for clothe, i have that same machine using leather to do wallets, multiple layers with leather, tension adjust is a headache.
Wish there had been an example of too loose and too tight lower bobbin thread to show how to trouble shoot between top and bottom adjustments.
I'm so glad I saw this video! I just started to put my LSZ-1 together (after letting it sit in the corner for over a year, untouched) and I discovered what was wrong with the old machine I threw away. Simple adjustments. Now with this new one I can do all the projects that I am planning. Sailboat rebuild, sail making, furniture rebuild and upholstery, light leather work but first new cushions for the mission chair I made. Great video. Thanks. It's also nice that I live only 15 miles from your shop.
We are so glad that this video helped you figure out some adjustments for the Ultrafeed and other brands of sewing machines. We want you to be proficient and confident when it comes to using your sewing machine. When you start your many projects, if you have any questions or problems let us know, we are glad to help. THANKS!!!!
Awesome thanks 🙏🏻 the Decorative cap had me all messed up - or + ugh taking it off and losing it up and just slowly tighten saving me from pulling my hair out!!!
“Righty-tightie. Lefty-loosie.”
Turning the dial (or most screws) clockwise, or to the right, tends to tighten things. Turning counter clockwise (to the left) will loosen.
I appreciate you reminding us of this basic yet essential knowledge. It's easy to forget these simple concepts, so thank you for bringing it back to our attention!
Nice looking machine and guide book, wish they made a cylinder arm machine as well!
So why did you not show the symptoms when the bobbin leaf spring is too loose or too tight. On my other home use sewing machine the directions were to hold the thread and snap it with a downward motion similar to using a yo-yo. It should spool out about 4 inches of thread. Is this a good rule of thumb for the lsz1?
Is an 18 needle appropriate for 92 thread? I can’t seem to get proper tensioning on the bottom with especially doubling canvas or even quadrupling
Your a life savor
Thank you so much for your kind words!
Sailrite rocks.
I love the videos and a different rolex on every video.. :)
Undercover flexer
Do you ever have a situation where the tension seems too high on upper thread (showing knots on top stitch) but as soon as you back it off a hair it then loops on top? Bottom looks good.
I've swapped needles (#18), and replaced the spring cap on bobbin carrier assembly as well as clean and oil the assembly. I'm using a V69 Poly thread, 18 needle on 500D cordura. Acts the same w 600D Ottertex or a combination of the 2.
I'm leaning towards a cheap chinese thread as the culprit, don't seem to be an issue when I use a Bonded nylon v69 T70 thread, same set up as above.
Thanks for all of your help.
EDIT: LSZ1
So much help on this video. I bought the ls1 4 months ago and each time I do the sewing i can see knots on both sides especially when am sewing two layers of ripstop fabric or any other thick fabric. Does this mean that both tensions are ok? From Africa Zambia!!
What size thread and needle are you using to sew the ripstop fabric? Also what is the ripstop oz.?
@@SailriteDIY I use v92 polyester thread brown which I bought together with the machine and #20 needle!!
@@SailriteDIY And the Ripstop is 1.1oz
@@mukumbimbonge2210 Are you using a size #12 needle and V-30 thread? If not, please try that.
True, if the knot is on the top and bottom side and you are working with a very light weight fabric, like ripstop, then tension is probably correct. However, switching to a lighter thread and needle may keep the knot in the center of the thin assembly.
Casi todo bien en las características. Solo me detiene a comprarlas que no tiene puntadas del num 8. Qué me proponen?
What causes the thread to rival up?
If this is a Sailrite Sewing Machine, simply email us at info@sailrite.com and we will email you an unlisted video to help fix that issue. We look forward to working with you to fix the issue.
Can someone please confirm (because I don't want to mess up my settings too much), counterclockwise loosens the pressure foot tension and clockwise tightens? Righty tighty lefty loosey? This is not spelled out in the manual (unless I overlooked it). Thanks!
You are correct!
How much is the utlrafeed machine?
Thank you for your educational videos! One thing I noticed, your machine is quiet... mine is soooo loud! I don't know why?
Do you have this machine? Or using advice for another?
I keep getting stuck with an extra loop at the end of sewing under the piece every so often.
Easy to resolve... Simply roll the balance wheel towards you until the take up arm is on its way up and is almost at its highest position up. Now, the loop of thread which was moving around the bobbin is released. No more third string when removing fabric from machine.
Re threaded and reinstalled bobin 5 times, top stitch looks good bottom is a rats nest, so frustrated, just got machine.
V92 thread #18 needle, cant figure out what is wrong
Bill, if this is a Sailrite sewing machine please email us at: support@sailrite.com for help from one of our sewing machine technicians.
@@SailriteDIY thanks, I figured it out, forgot to hold the threads at initial sewing.
Is there a warranty?
Does the speed you run affect the tension?
No, it does not.
@@SailriteDIY i disagree
Thread rival up Rex 607
I want by this mesin how
First. Nevera Buy a chinesse machine like sailrite. Made in china painted in other color. Crapp
Nothing but snapping thread. No difference regardless of thread, needle or tension. I am at wits end.
Hi Sam, If you own a Sailrite sewing machine email our sewing machine techs for help at support@sailrite.com.
@@SailriteDIY will do, the machine is under a week old
@@SailriteDIY done. i look forward to some guidance.
@@samcox866 Sam, did you email support@sailrite.com for help, if so, you will have a support case number. Can I have the support case number and I will check on the status for you?
@@SailriteDIY i have had the machine for about a year now and for the 90 minutes of sewing i do each month i spend about 9 days dialling in the machine. The ls1 has been an absolute lemon. I suspect that it had a very serious drop in transit.
:)