Making your Workbench Mobile (installing SPACECARE workbench casters)
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- Quick install of the SPACECARE Workbench Casters to our workbench so it can be easily moved into its new home and moved when needed. These casters are rated for 800 lbs and come with nice polyurethane durable steel wheels that can move 360 degrees. Also after the install we show it in action and share a quick tip that came from TigerCreekFarm's video on these. If your interested in getting these for yourself we have included a link to them below. As an Amazon Associate I earn from qualifying purchases at no extra cost to you, so thanks for the support!
SPACECARE Workbench Casters kit 800Lbs Heavy Duty Retractable Workbench Stepdown Caster Wheels Adjustable Polyurethane Durable Steel Construction(Set of 4)
amzn.to/3dR49UI
Thanks for explaining everything.
These things stick out way too far and will constantly get in the way and tripped over (I speak from experience). Use some forethought and install them on the inside of the legs. If that's not possible, I'd strongly recommend a different solution than these casters.
Nice job friend, I’m right now installing mine but I thought about seeing one video before installing, and here we are, very good information, greetings from Tecate, Mexico 🇲🇽 were the best Mexican beer is made 🍺
Thank you, having a mobile bench is really helpful in the shop. By the way, really like that table you built on your page! Looks amazing! Perfect for holding one of those "best" Mexican beers lol.
I just bought the brand just like your wheel lift put a board across the wheels it will not bend the wheels pedal
Great tip/point on wheel facing in when using the lever
Great video! I ordered the same set of casters for a workbench project. The purchase was from Amazon. The only problem I have is that my box did not include a template, and I'm trying to figure out how high off of floor level I need to mount the brackets.
If they are the same ones I used in this video the plates should be 1.4” from the floor. To make it easier for the install, I would cut a 1/4” piece of scrap plywood that you could clamp to the leg so you can mark the holes to predrill without having to worry about the plate sliding out of place.
Helpful video, thank you. Easy install, lift assembly seems fine so far and casters roll smoothly. Mounting the template on 1/4” backer was a good idea, made clamping solid.
Great to hear!
I would recommend applying some thread locker to the caster machine threads to avoid them loosing over time
Nice tip!
How far does the whole assembly stick out from the leg when retracted (wheel up)?
Just measured and it’s roughly 4”
i’m glad you added the tip about positioning the caster wheels. It makes a lot of sense and should add to the reliability of the casters thanks
Glad you found the tip helpful!
Remember the clutch, cheap ass chinese screws break off.
I use a 6 foot 5 double bench, how should I make the wheels?
Wheels come with everything you need from Spacecare.
Very informative video, thank you sir!
Glad it was helpful!
hi can you show me how to make this bench fit wheel?
The wheels come with a template that will show you exactly how to align them so they work properly
nice detail thanks
Thank you
Thanks so much!!!!!!
You're welcome!
Thank you these seem like the perfect kind of casters that I've been looking for for my workbench with a great price
They’re pretty sturdy as well.
Thanks for Video, I dig your workbench!
Thanks!
good idea... I like that you didn't need to take out the drawers. makes it a lot easier!
Thank you, and yes, it is so nice being able to install these without emptying the whole bench!