An impressive movie... I have only one remark: The voltage across Re does not follow the input voltage simply because the base-emitter voltage is nearly constant and transfers the input voltage to the emitter. This would be the case if the collector of the transistor was left unconnected. The voltage across Re is not created by the input voltage by passing the input current through Re but by the transistor that changes its collector current through Re to set the voltage across it (almost) equal to the input voltage. This is actually the principle of negative feedback.
would you do a tutorial about how to make a common emitter amplifier concerning the calculation of the voltage gain and the relation between the frequency and the input impedance, please ?
Would this circut limit any load bearing circuit, rather than a LED, regardless of what total resistance the load circuit has? Meaning, i have a small circuit of chips, and I want to limit total current to 18ma, can I just take the LED out and replace with my small circuit?
![กี่หมื่นฟ้า | Your Sky Series EP.1 [1/4]](http://i.ytimg.com/vi/vLGjxFL6U_I/mqdefault.jpg)
Really helpful and clear for the uber-novice like myself. The little stumbles made it very human too.
This was really accessible and intuitive. Nice job!
That’s really neat! Going to use this tool from now on.
Excellent software simulator.
Thank you so much for the explanation through it all!
im sorry for repost this video in my channel for my homework🙏
An impressive movie... I have only one remark:
The voltage across Re does not follow the input voltage simply because the base-emitter voltage is nearly constant and transfers the input voltage to the emitter. This would be the case if the collector of the transistor was left unconnected. The voltage across Re is not created by the input voltage by passing the input current through Re but by the transistor that changes its collector current through Re to set the voltage across it (almost) equal to the input voltage. This is actually the principle of negative feedback.
would you do a tutorial about how to make a common emitter amplifier concerning the calculation of the voltage gain and the relation between the frequency and the input impedance, please ?
You can find that in the transistor's data book! :-)
Love your tutorials and the sim, but wondered why the sim requires a ground for DC circuits.
SUPER INCREDIBLE!!!!!!!!!!!!!!!!!! THANK YOU AWESOME CIRCUIT SIMULATOR!!!!!!!!!!!!!!!!! mike
huge thumbs up and a sub from me!!!
Please make a video on CMOS as well to make a Ring Oscillator or Inverter. Thanks
love your work
Thank you! Cheers!
You need some motor symbols. DC, and Stepper might be enough but BLDC is so common these day in hobby systems, you should have that one as well.
Would this circut limit any load bearing circuit, rather than a LED, regardless of what total resistance the load circuit has? Meaning, i have a small circuit of chips, and I want to limit total current to 18ma, can I just take the LED out and replace with my small circuit?
thank you
Would be better to calculate values. Q1 has a beta, Ic = beta * Ib, then calculate Base resistor.
Felt that you need to slightly slow down your presentation.
And 320+ people didn't