Thank you for the video. There is one thing I would mention to help anyone having a problem placing the safety through the trigger. If you find that no matter how many times you twist, turn and push the safety to get it through, take the small hex wrench and loosen the chisel tip (hex nut is on top of the trigger) to allow the safety through and line up and adjust accordingly.
I absolutely love my new Tminey Trigger. That i installed in my PSA AR9. It's a different beast now. Awesome reset 3 pound trigger !!!!!!!!!! Two thumbs way Up
I've installed the Timney trigger on a CZ Scorpion Micro. I followed your video step by step. I installed the safety bar, aligning it correctly into the grooves of the transfer bar. The safety does not move. What am I doing wrong?
Edit/update* figured it out. I just didn’t remove the safety selector before trying to drop the pack. On a 3+ micro, what do we do if after removing the 3mm screw through the trigger guard, the trigger pack still won’t pop out?
I’ve installed the same trigger in my Cz and everything functions great but the gun doesn’t fire. Doesn’t appear there are even any hammer strikes on the primer. What did I do wrong. Again everything functions great when dry firing !
Installing V2 on my Scorpion 3+ micro & I can’t get the safety to move between safe/fire. Why? Trigger works just problem with the safety selector. Help please
Hope you figured it out by now, but for others: if the set screw for the chisel tip is even a quarter turn too tight it'll impede the safety selector rotation. Loosen the set screw little by little until you get the selector rotation feel you like.
Thank you for the video. There is one thing I would mention to help anyone having a problem placing the safety through the trigger. If you find that no matter how many times you twist, turn and push the safety to get it through, take the small hex wrench and loosen the chisel tip (hex nut is on top of the trigger) to allow the safety through and line up and adjust accordingly.
I discovered this by accident, I should have read the comments, would've saved me 15-20mins of playing around.
I hate how manufacturers always seem to gloss over these parts that seems to take hours to figure out. Thank you
Thank you! Yes, your customer service is top-notch!
I absolutely love my new Tminey Trigger. That i installed in my PSA AR9. It's a different beast now. Awesome reset 3 pound trigger !!!!!!!!!! Two thumbs way Up
Great video.. I have bought a V2 trigger for my scorpion 3+ and it was easy to install. Works great too.
That looks easy as pie with a bit of attention to detail. Thanks guys.
I've installed the Timney trigger on a CZ Scorpion Micro. I followed your video step by step. I installed the safety bar, aligning it correctly into the grooves of the transfer bar. The safety does not move. What am I doing wrong?
The detent for the safety is too tight. Adjust the set screw on top of the trigger pack to be flush with the body.
Super top , merci !!!❤❤🇨🇵
Great safety explanation...
Tried removing the safety selector screw and it instantly stripped, any tips on removing?
Edit/update* figured it out. I just didn’t remove the safety selector before trying to drop the pack.
On a 3+ micro, what do we do if after removing the 3mm screw through the trigger guard, the trigger pack still won’t pop out?
Wait !!!… what’s the tiny spring for ?
It's for changing the trigger pull weight from 3-3.5 to 5-5.5. They mention it early in the video.
I’ve installed the same trigger in my Cz and everything functions great but the gun doesn’t fire. Doesn’t appear there are even any hammer strikes on the primer. What did I do wrong. Again everything functions great when dry firing !
Did you remember the transfer bar?
Did you figure it out? What happened?
Installing V2 on my Scorpion 3+ micro & I can’t get the safety to move between safe/fire. Why? Trigger works just problem with the safety selector. Help please
Hope you figured it out by now, but for others: if the set screw for the chisel tip is even a quarter turn too tight it'll impede the safety selector rotation. Loosen the set screw little by little until you get the selector rotation feel you like.
@@Alshen had this exact problem and your comment helped me 100%! Thank you!
I installed my V2 and the hammer is striking the ejector and it doesn’t even hit the firing pin….
I have the same problem
👍🏼