A good video and he is right about using a diamond hole bit. I don't think I would want to risk cracking my porcelain tiles with a carbide bit. One thing I would add is that dipping the bit in water every 5 seconds or so saves the bit from overheating and in the end saves time and lots of money.
Thanks for the great advice! I thought I was doing something wrong when my diamond bit required so much effort, but still would not go through the tile completely. I guess it was done since I had already drilled four holes with it previously. I bought a new bit, and drilled four new holes with much less effort. Well worth the price of a new bit. It’s good to know that there are people like you making TH-cam videos who actually know what they are talking about! Unfortunately, this is not always the case.
As I am a Diamond Driller for forty years, water cooling is essential for cooling our bits. Keeping the bit cool during drilling will keep the diamond boart secure in the matrix of the tip for much longer. Heat will allow the matrix become soft and the diamond boart will fall out. does this make sense? How hard you push can also dislodge the boart. Hope this saves you some cash.
Thanks for this video. Right to the point with no nonsense. Very professional. I have to enlarge the mounting holes on my mom’s toilet bowl bc the replacement screws are larger than the discontinued standard ones that hold the tank. I’m shaking in my boots bc the unit is about $1000 and now it’s been discontinued. I can’t mess this up! Thanks again.
Not only is it a good idea to spray water on the porcelain and bit to keep it cool and increase the longevity of your bit, but it also reduces the dust from the porcelain which contains silica. It's bad to get silica in your lungs.
Slow the drill down and keep the bit sprayed with water. I drill in porcelain quite often with those bits and can drill dozens of holes with a single bit.
I managed to put up a bathroom mirror type steel cabinet, eventually! It needed four holes and wore out the diamond porcelain drill as predicted. The holes ended up costing more than the Wilko cabinet! Thanks for the tips on drilling.
Great vid! I bout the diamond bit and drilled 4 holes. Found if I dipped it in water as soon as I saw it getting warm, it cut much more quickly. Thanks!
you just taught me the "tip" technique when starting the hole -- thought I had to buy a guide. EDIT -- actually, I did this......buy a fender washer with a hole the size you need and duct tape it. Use that as the guide. Works perfectly.
Nice vlog mate, had some diamond coated bits, but ordered ones now that will do porcelain tiles, in the process of tiling a walk in shower the first tile type was ceramic with a glass tries a few practice holes with non coated diamond bits worked okay then the missus found another tile yep porcelain so have gone for diamond coated wax coated bits, thanks for the advice.
Oh ok, I thought I did not know how to drill on tiles or my drill was not capable of drilling on tiles. After watching this, I realized I was drilling on a rigid tiles. I just need a right drill bit. Thanks.
Some good advice, great video. Technology has moved on since this video was made. CorePlus make diamond tile drill bits that can drill upto 40 holes in an 8mm grade 5 Porcelain tile.
Thx for your informative video. Q1] The larger bits become hollow and not closed tip. can they be used to make holes in tile & concrete in one drilling mode & one drill bit and one push? Q2] Are they suitable for glass drilling? How about stainless steel plate 5mm thick? Will they give better results than those ss steel drill bits ?
A very useful vid with some good information, however, I gained equally as much from reading all (most) the comments below. Clearly the bit is the right one to use, but cooling the bit during and after each hole seems vital to maintain performance and bit life! I think the skill is getting the initial 'bite' in the right place, once you've achieved that, it's a matter of cool gentle grinding. I feel a little more confident about my first porcelain hole, just need to get it started in the right place! Thanks
Hey! Just thought you should know... the new Bosch EXPERT HEX-9 HardCeramic is suitable for ceramic tiles, including porcelain up to grade 5 hardness, roof tiles, non-tempered glass and natural stone with a maximum thickness of 10mm. Might be worth giving that a go too!
Instead of drilling dry have someone add water with a small paint brush to cool down and therefore extend the life of the bit. They add water when drilling into rock using diamond tipped drill rig.
Toilet Bowl Final Score: Porcelain Tile: 1 Tile & Glass Bit: 0 Game Recap: Tile & Glass Bit started off well, easily making tiny starting points in all six holes for the toilet flange without walking at all. Confident and coming around again to finish the holes, TGB was stopped dead halfway through the first hole by Porcelain Tile with seemingly no effort. PT snapped off TGB's pointed attack and reduced its flanks right to the shaft. That was the end of TGB's offense, and PT ran out the clock.
It's clear what style bit is required for porcelain. In my case, however, I am drilling narrow-diameter holes in glazed ceramic plant pots (to facilitate water drainage). My first thought was to buy a pointed bit such as the one you showed and rejected for porcelain. I'm guessing such a bit would be fine. However, if I wanted to be ready for ANY eventuality, including one day drilling into porcelain, may I assume the bits you're recommending would also work well on my pots?
Perfect! I’ve been stressing about having to drill holes in my tiles for a new toilet. Wondered how I would start the diamond bit I ordered. Many thanks from Montana!
also seen another tip, if the bit is taking longer to get your hole its been suggested to drill through something like a brick this re sharpens the diamonds as they get clogged up with tile crap not tried it yet,
This was helpful. I'm using water to cool off the bit seems to help out (as per the instructions that came with the bit so not my idea). Also, starting at the 45 degree angle is also instructed for using the bit. This video helped me to actually read the instructions before using heh...thanks again
I asked a simple question how to drill through porcelain tile and we turned a two minute video into a 10 minute video but I guess that's how TH-cam works
Do you have to change bits to a masonry one when you go deeper after the porcelain tile? or the diamond bit is good enough for it to traverse the concrete where the tile is attached to?
After using ceramic bit on my tiles for 1 hour and getting nowhere I checked the order details for when I was renovating the apartment, and sure enough - the tiles are porcelain. Getting the diamond bit then.
You need to keep the bit wet as much as possible and it will last a lot longer. I drill porcelain a lot and a bit lasts way more than what you are getting.
I have the sets from 11mm all the way up to 110mm as well as the jigs and they are very good and the rad pipes were cut in using 16mm bits. However this is really a video for people who will want to drill and hang something once and won't have or need a full tiling kit.
Hi looked for the fixing towel rail rad vid but couldnt find one as I have plaster board wall and ild rad was fitted using in screw in fasteners for plaster board but new rad is taller and same as the one on vid any help please our tiles are porcelain too like ones in vid
Hi mate, subscribed to your chanel, very good, how would you cut or drill around radiator pipes in the floor or pipes coming out of the wall, also cutting tile around a WC if the customer dont want to take it out and go under it, thanks mate keep up the videos
Before this video I just watched a kitchen and bathroom fitter use Bosch Tungsten Tip 4 mm bit costing £2 to do this in under 2 mins, he didn't rate diamond tips to put it politely. Just an alternative point of view.
Just watch the video and would like to point out that all these vacuum brazed drill bits should be used with an electric drill due to the speed needed to get the maximum effectiveness from the drill bit and prolong the life of the drill bit. The wax inside the bit will then melt at the correct rate and replacement wax is also available to refilled the wax bit if needed. Not saying using water won't help but not sure its necessary if using the correct drill, its all in the speed of the drill cordless drills are easier to use yes but not the correct drill to be using.
Well that looks better than mine. Because I bought a Vitrex one from B&Q to drill 8mm porcelain tiles, and each hole takes about 5 minutes and drains the drill’s full battery. And hurts my arm!
@@bathroomplumbingandfitting7089 ill drop a link here when i have a min to find the shop I buy from. These bits are the dogs. You get ages out of the bigger sizes. 14 mm upwards. The smaller ones you get what you'd expect to cos it's the heat that kills them
holy fking shit..... those things are fast! ive been doing this with masonry bits for years. got a shower screen to fit tomorrow, looks like scroofix are getting my money again
You only get 4 cuts out of your diamond bit is because you are drilling dry. They should be constantly wet. Think of low little life you'd get from a tile saw blade if you cut tile dry.
Does it also help to switch out the diamond bit for a masonry one after you're through the glaze? Or after the ceramic underneath? Seems fine for the wall underneath at least; I don't know if like standard concrete actually diminishes this type of diamond bit fast.
Thanks for this video! I love your channel, great for ideas and how to's. I have a question please, how do I know what my tiles are? I have moved into a place with a fully tiled bathroom and have no idea how to tell the difference! Help please!
That's kind of you. Are you able to send me a picture message on here? If not you can post a picture on my Twitter which is @WeFitBaths I'll take a look and see if I can tell. Take a couple of close-ups and also the edge of the tile. Generally a porcelain tile will be the same colour all the way through. A ceramic tile will have a glazed finish on top which is a different material and colour from the rest of the tile.
I appreciate the video but you have some information that is not correct. I actually own a granite fabrication shop and it is true that the one bit that you are using to go through the tile is a good tool for the job howeverI also ran a crew of six tile installers and after years of struggle we found out that using one of the other masonry bits you can make a hole in the hardest porcelain tile in about 20 seconds. I would tell you exactly how we would do and these are masonry bits made by Bosch or DeWalt that you would buy at Lowe's. The whole trick is keeping the bit cool this is not theoretical we have made hundreds of holes using drill bits that would cost $10 or less and you should be able to make anywhere from 10 to 30 holes with each bit if you take care of them We never cracked a tile also using a hammer drill What you will do is set the hammer drill on hammer drill mode in turn it to high. You want to spin it as fast as possible. To get it started in will try to walk on you but once you get it startedit will not take long to make the hole. The trick is you need to have a water sprayer with you and you need to be spraying water the entire time into the hole while you move the drill bit in and out so that it can be cooled down. The drill bit will fail within seconds if it's not cool down. You can use a hand sprayer or small pump up sprayer and this is how we would do it.I'm not asking you to believe it you can try it and find out for yourself we did hundreds of holes using this method Now on another note, the drill bit that you are using works well as you have demonstrated. We use a similar bit to drill through granite to insert anchors and a much better setup is to actually get a bit that screws right onto an angle grinder. You can find these bits at any granite supply house such as regent Stone or Braxton Bragg. These bits actually have a water channel on the inside that will keep the bit cool as you drill but you have to have a water attachment. Hope this is helpful
this was my experience as well, at work today. Was slow and tedius, then I went to the truck and grabbed my other drill with the hammer function. got it started a bit then switched to hammer function, full speed. Went at least 5x quicker. Just had to remember to dip the bit in water. of course I didn't figure this out till the last two holes of the day, lol. I've also seen plumbers drill through tiles to install fixtures with an sds hammer drill.
Wet drill with water..!!! Have someone spray water while drilling and that drill bit will last very long time. I get well over 60 holes through porcelain tiles. Drill it dry like this guy and you’ll be lucky to get 8 or maybe 10 holes max. Water keeps the bit cool and clean. It doesn’t clogg up with porcelain dust.
A good video and he is right about using a diamond hole bit. I don't think I would want to risk cracking my porcelain tiles with a carbide bit. One thing I would add is that dipping the bit in water every 5 seconds or so saves the bit from overheating and in the end saves time and lots of money.
Or a tape dam filled with water.
Thanks for the great advice! I thought I was doing something wrong when my diamond bit required so much effort, but still would not go through the tile completely. I guess it was done since I had already drilled four holes with it previously. I bought a new bit, and drilled four new holes with much less effort. Well worth the price of a new bit. It’s good to know that there are people like you making TH-cam videos who actually know what they are talking about! Unfortunately, this is not always the case.
Thanks for the video. I drilled my porcelain tiles today following your tutorial and it worked a treat. Thanks man.
As I am a Diamond Driller for forty years, water cooling is essential for cooling our bits. Keeping the bit cool during drilling will keep the diamond boart secure in the matrix of the tip for much longer. Heat will allow the matrix become soft and the diamond boart will fall out. does this make sense? How hard you push can also dislodge the boart. Hope this saves you some cash.
Many thanks, excellent advice
Thanks for this video. Right to the point with no nonsense. Very professional. I have to enlarge the mounting holes on my mom’s toilet bowl bc the replacement screws are larger than the discontinued standard ones that hold the tank. I’m shaking in my boots bc the unit is about $1000 and now it’s been discontinued. I can’t mess this up! Thanks again.
Glad I found this. I have to drill porcelain for the first time next week and was dreading it.
Not only is it a good idea to spray water on the porcelain and bit to keep it cool and increase the longevity of your bit, but it also reduces the dust from the porcelain which contains silica. It's bad to get silica in your lungs.
The advice about the baskets in the shower was really appreciated such a good idea cheers mate.
I watched this video and ordered those same bits online, followed your instructions and really worked well. Thank you!
what kind of drill bit is this?
I wondered why the masonry drill bit wouldn't even make a dent in my tiles. I will order the diamond bit. Thanks for this video.
Porcelain is extremely "hard"!
@@suds2you the diamond tool worked well.
Slow the drill down and keep the bit sprayed with water. I drill in porcelain quite often with those bits and can drill dozens of holes with a single bit.
Oh my gosh!!! Get a spray bottle and keep your bit wet. Shaking my head, maybe you prefer Anal without lube too.
Which bit 😂
Buddy I had Diablo bits and it took 4 of them to make one hole omg
But it takes me a good 10mins for a single hole! Often feels like I'm going nowhere
@@karanmakhijatry Milwaukee...and if u go slow and stop frequent to water the bit and cool it..u should be good
I went thru 2 1/4 inch $18 bits from Home Depot working on 4 holes. I got a $10 Bauer bit at harbor freight that finished up all 4 holes no problem.
Thanks for the video, spent 2 hours with a ceramic bit and masonry bit to drill 2 holes.
I managed to put up a bathroom mirror type steel cabinet, eventually! It needed four holes and wore out the diamond porcelain drill as predicted. The holes ended up costing more than the Wilko cabinet! Thanks for the tips on drilling.
Just purchased a 5.5 and an 18 mm of that brand although I haven’t used them before and found this video very useful, thankyou!! 👍👍👍
Thanks for video drilled my porcelain tiles using the diamond drill bit worked like a charm cheers
Great vid! I bout the diamond bit and drilled 4 holes. Found if I dipped it in water as soon as I saw it getting warm, it cut much more quickly. Thanks!
you just taught me the "tip" technique when starting the hole -- thought I had to buy a guide.
EDIT -- actually, I did this......buy a fender washer with a hole the size you need and duct tape it. Use that as the guide. Works perfectly.
The washer tip is brilliant! I was worried about hitting the mark, so I taped a washer over it. Worked like a charm.
Many thanks...
4:53 ...a couple of obvious BITS...
loved it
Thank you, this was helpful. I bought the bit for ceramic tiles and like you said it made a dent but it broke so I was looking for advice :)
Nice vlog mate, had some diamond coated bits, but ordered ones now that will do porcelain tiles, in the process of tiling a walk in shower the first tile type was ceramic with a glass tries a few practice holes with non coated diamond bits worked okay then the missus found another tile yep porcelain so have gone for diamond coated wax coated bits, thanks for the advice.
There is a new drill bit from BOSCH called HEX-9 hard porcelain drill bit. Much better and faster and lasts tons of holes if you water cool.
Many thanks...
Oh ok, I thought I did not know how to drill on tiles or my drill was not capable of drilling on tiles. After watching this, I realized I was drilling on a rigid tiles. I just need a right drill bit. Thanks.
Some good advice, great video. Technology has moved on since this video was made. CorePlus make diamond tile drill bits that can drill upto 40 holes in an 8mm grade 5 Porcelain tile.
Awesome video!. I just tried drilling my porcelain tile with concrete bits and glass drilling bits, wish I seen this video.
I had success with starting the hole with the expensive diamond bits and finishing the hole with a masonry bit.
Arrow head bit- 4 holes cooled with spraying water whilst drilling - 10 for £7.50, will carry on as usual thanks
Thx for your informative video. Q1] The larger bits become hollow and not closed tip. can they be used to make holes in tile & concrete in one drilling mode & one drill bit and one push? Q2] Are they suitable for glass drilling? How about stainless steel plate 5mm thick? Will they give better results than those ss steel drill bits ?
This is the best video on this subject. Thank you!
Brilliant video, very helpful. Just feel that little bit more confident tackling my porcelain tiles now. Thank you.
Ive used these bits on 1/2 floor porcelain that was used as a wall tile. 8 holes took 2 hrs....
A very useful vid with some good information, however, I gained equally as much from reading all (most) the comments below. Clearly the bit is the right one to use, but cooling the bit during and after each hole seems vital to maintain performance and bit life! I think the skill is getting the initial 'bite' in the right place, once you've achieved that, it's a matter of cool gentle grinding. I feel a little more confident about my first porcelain hole, just need to get it started in the right place! Thanks
Hey! Just thought you should know... the new Bosch EXPERT HEX-9 HardCeramic is suitable for ceramic tiles, including porcelain up to grade 5 hardness, roof tiles, non-tempered glass and natural stone with a maximum thickness of 10mm. Might be worth giving that a go too!
Thank you. This information was just what I needed.
the action starts at @5:00 min mark
By my best estimates, you just saved me some time and money. Thanks!
Instead of drilling dry have someone add water with a small paint brush to cool down and therefore extend the life of the bit. They add water when drilling into rock using diamond tipped drill rig.
Thanks for your info. It helped me install a grab bar
You gotta cool it with running water. As others have said. Dramatically extends your bit's life.
Toilet Bowl Final Score:
Porcelain Tile: 1
Tile & Glass Bit: 0
Game Recap:
Tile & Glass Bit started off well, easily making tiny starting points in all six holes for the toilet flange without walking at all. Confident and coming around again to finish the holes, TGB was stopped dead halfway through the first hole by Porcelain Tile with seemingly no effort. PT snapped off TGB's pointed attack and reduced its flanks right to the shaft. That was the end of TGB's offense, and PT ran out the clock.
Nope, I just didn't listen. Had to see it for myself, but PT wasn't so lucky when I pulled out the diamond hole saw for the next game.
Hilarious!
It's clear what style bit is required for porcelain. In my case, however, I am drilling narrow-diameter holes in glazed ceramic plant pots (to facilitate water drainage). My first thought was to buy a pointed bit such as the one you showed and rejected for porcelain. I'm guessing such a bit would be fine. However, if I wanted to be ready for ANY eventuality, including one day drilling into porcelain, may I assume the bits you're recommending would also work well on my pots?
Perfect! I’ve been stressing about having to drill holes in my tiles for a new toilet. Wondered how I would start the diamond bit I ordered. Many thanks from Montana!
Great advice and very well presented - thank you!
also seen another tip, if the bit is taking longer to get your hole its been suggested to drill through something like a brick this re sharpens the diamonds as they get clogged up with tile crap not tried it yet,
This was helpful. I'm using water to cool off the bit seems to help out (as per the instructions that came with the bit so not my idea). Also, starting at the 45 degree angle is also instructed for using the bit. This video helped me to actually read the instructions before using heh...thanks again
I like your suggestion to buy extra fixtures because when they are discontinued, you can't find the same thing, or something with the same fit.
Great informative video, many thanks!
Thank you very much, excellent presentation!
I asked a simple question how to drill through porcelain tile and we turned a two minute video into a 10 minute video but I guess that's how TH-cam works
😂😂😂
They come wax filled to keep them cool now.
Guessing you can rewax them after drilling?
I’ve done a few holes on porcelain with ceramic bits and tool ton of elbow grease and could not get accurate holes wish I saw this video
Really helpful, thank you for posting
Thank you. Starting at an angle, great tip.
Hi nice review i couldn't hold the drill steady like my drill goes all over the tile please suggest me how to hold the drill steady
5:30 is the bit you are looking for. Ps use water to keep bit cool.
My life just flashed before me , fighting with these tiles . Skipping , hot bits , etc Lol
Do you have to change bits to a masonry one when you go deeper after the porcelain tile? or the diamond bit is good enough for it to traverse the concrete where the tile is attached to?
Is there any point to start with a smaller bit first.
Sometimes I'll do this in very hard brick or concrete. Can the same be done in porcelain? MT.
No, there would be no way to center the larger core
After using ceramic bit on my tiles for 1 hour and getting nowhere I checked the order details for when I was renovating the apartment, and sure enough - the tiles are porcelain. Getting the diamond bit then.
Thanks, it helped me greatly.
You need to keep the bit wet as much as possible and it will last a lot longer. I drill porcelain a lot and a bit lasts way more than what you are getting.
Brilliant video, well explained, honest, sincerely shared and extremely helpful. You have a subscriber in me. Cheers mate 👍
Use water and get months.
110 mm bit is class for round internal vent covers
I have the sets from 11mm all the way up to 110mm as well as the jigs and they are very good and the rad pipes were cut in using 16mm bits.
However this is really a video for people who will want to drill and hang something once and won't have or need a full tiling kit.
Install the aliexpress app and they will ship them to the UK.
I'm in ireland
I can get months out of bits.
I even have a 40 mm one we have named the red bit cos it's got red electrical tape .
If ya like i can send you a link
I notice you use the drill on number 2, the higher speed, I thought they were meant to be used at below 750?
the slower drill speed the better and the drill bits will last forever if water is being used to cool while drilling.
I have the same drill bit, the same drill and it takes me 10 min to drill a hole... not sure where I'm going wrong? Unless a faulty drill bit
How do you know if you have ceramic or Porcelain in an old bathroom?
Nice video Gonzo. Helpful tips.
Hi looked for the fixing towel rail rad vid but couldnt find one as I have plaster board wall and ild rad was fitted using in screw in fasteners for plaster board but new rad is taller and same as the one on vid any help please our tiles are porcelain too like ones in vid
Hi mate, subscribed to your chanel, very good, how would you cut or drill around radiator pipes in the floor or pipes coming out of the wall, also cutting tile around a WC if the customer dont want to take it out and go under it, thanks mate keep up the videos
Before this video I just watched a kitchen and bathroom fitter use Bosch Tungsten Tip 4 mm bit costing £2 to do this in under 2 mins, he didn't rate diamond tips to put it politely. Just an alternative point of view.
Thanks best video on this!
weren't you supposed to be using water to spray onto the hole as you go?
Just watch the video and would like to point out that all these vacuum brazed drill bits should be used with an electric drill due to the speed needed to get the maximum effectiveness from the drill bit and prolong the life of the drill bit. The wax inside the bit will then melt at the correct rate and replacement wax is also available to refilled the wax bit if needed. Not saying using water won't help but not sure its necessary if using the correct drill, its all in the speed of the drill cordless drills are easier to use yes but not the correct drill to be using.
Many thanks first off. Should we drill fast or slow? I'm used to the speed of a cordless Makita! Thanks again...
@suds2you drill on speed 2 if using a 458/453 cordless but if using a corded drill just plug in and drill
@@shaneluxton8216 thanks again sir...
Top tips and advice thanks for sharing 👍
Does this work if the back of my tile wall is empty? I noticed my bathroom tiles weren't fully laid with cement behind them
You'll need a hollow wall fixing because there is nothing behind. Be careful not to hang anything too heavy on there
So I can never use tile drill bits on porcelain? I have to buy a diamond drill bit?
Well that looks better than mine. Because I bought a Vitrex one from B&Q to drill 8mm porcelain tiles, and each hole takes about 5 minutes and drains the drill’s full battery. And hurts my arm!
Great tutorial! Do you have to wait for the bit to cool down before each hole?
I drill for about ten seconds, don't push too hard and dip the bit in cold water. At £20 ea. cooling prolongs the life span.
lubricate with water while drilling
Thx. Very clear and useful advice.
I get mine from aliexpress.
Cheap as chips.
And if you find the right shop you can get 15 piece set for 7 bucks.
A makita set will run 100 bucks easy
Wow, that really is cheap Guy.
We can't get them for anywhere near that price in the UK. 😒
@@bathroomplumbingandfitting7089 ill drop a link here when i have a min to find the shop I buy from.
These bits are the dogs.
You get ages out of the bigger sizes.
14 mm upwards.
The smaller ones you get what you'd expect to cos it's the heat that kills them
@@garathjax420 link mate?
going to share the link -- never quite sure with ali express... I've fund it hit and miss
Can you use a torque drill?
What brand is that bit the ones I found just have the cutting on the very edge The one you used has a 1/2" diamond cutting on the bit
Great video. Thank you 😊
Ohhh!! I see. Many thanks 🙂
holy fking shit..... those things are fast! ive been doing this with masonry bits for years. got a shower screen to fit tomorrow, looks like scroofix are getting my money again
How Thick Are the Wall Tiles ? Cheers ..
Very helpful.
Glad it was helpful Kenneth
You only get 4 cuts out of your diamond bit is because you are drilling dry. They should be constantly wet. Think of low little life you'd get from a tile saw blade if you cut tile dry.
So true
Does it also help to switch out the diamond bit for a masonry one after you're through the glaze? Or after the ceramic underneath? Seems fine for the wall underneath at least; I don't know if like standard concrete actually diminishes this type of diamond bit fast.
I use the same bits but keep them wet as much as possible, it's hard work but do get a few more holes from them
Great video and well explained thankyou
Great vid... can you let me know what power drill you’re using?
cool .. didn't know such bits exist!!!
What kind of radiator is that? I want one.
Good work, well done.
impact driver?
Thanks for this video! I love your channel, great for ideas and how to's.
I have a question please, how do I know what my tiles are? I have moved into a place with a fully tiled bathroom and have no idea how to tell the difference! Help please!
That's kind of you. Are you able to send me a picture message on here?
If not you can post a picture on my Twitter which is @WeFitBaths
I'll take a look and see if I can tell. Take a couple of close-ups and also the edge of the tile. Generally a porcelain tile will be the same colour all the way through. A ceramic tile will have a glazed finish on top which is a different material and colour from the rest of the tile.
Great vid thanks
Brilliant 10/10
Thank you
I appreciate the video but you have some information that is not correct. I actually own a granite fabrication shop and it is true that the one bit that you are using to go through the tile is a good tool for the job howeverI also ran a crew of six tile installers and after years of struggle we found out that using one of the other masonry bits you can make a hole in the hardest porcelain tile in about 20 seconds. I would tell you exactly how we would do and these are masonry bits made by Bosch or DeWalt that you would buy at Lowe's. The whole trick is keeping the bit cool
this is not theoretical we have made hundreds of holes using drill bits that would cost $10 or less and you should be able to make anywhere from 10 to 30 holes with each bit if you take care of them
We never cracked a tile also using a hammer drill
What you will do is set the hammer drill on hammer drill mode in turn it to high. You want to spin it as fast as possible. To get it started in will try to walk on you but once you get it startedit will not take long to make the hole. The trick is you need to have a water sprayer with you and you need to be spraying water the entire time into the hole while you move the drill bit in and out so that it can be cooled down. The drill bit will fail within seconds if it's not cool down. You can use a hand sprayer or small pump up sprayer and this is how we would do it.I'm not asking you to believe it you can try it and find out for yourself we did hundreds of holes using this method
Now on another note, the drill bit that you are using works well as you have demonstrated. We use a similar bit to drill through granite to insert anchors and a much better setup is to actually get a bit that screws right onto an angle grinder. You can find these bits at any granite supply house such as regent Stone or Braxton Bragg. These bits actually have a water channel on the inside that will keep the bit cool as you drill but you have to have a water attachment. Hope this is helpful
Interesting. Think I'll have a go with the old hammer drill 👍
this was my experience as well, at work today. Was slow and tedius, then I went to the truck and grabbed my other drill with the hammer function. got it started a bit then switched to hammer function, full speed. Went at least 5x quicker. Just had to remember to dip the bit in water. of course I didn't figure this out till the last two holes of the day, lol. I've also seen plumbers drill through tiles to install fixtures with an sds hammer drill.
Those cheap ass bits won't touch that tile....
Many thanks for your in-depth study; my next adventure...
Wet drill with water..!!!
Have someone spray water while drilling and that drill bit will last very long time. I get well over 60 holes through porcelain tiles. Drill it dry like this guy and you’ll be lucky to get 8 or maybe 10 holes max.
Water keeps the bit cool and clean. It doesn’t clogg up with porcelain dust.
Yup, heat is the enemy. Even a small sponge soaked with water held against the bit works.