I liked the phone box and the low profile thing. I'm more into functions with my own stuff. In a sense a whole lot is missing in the RPi world. A power bank should snap onto a case like Lego or with magnets and separate easier for long trips in Norway. Add "snow cooling" or something and 3 extensions of the GPIO which everyone likes, but there is only one (usually) and stacking the RPi stuff makes it a high tower so you can't take it with you on a bicycle.
I loved all but personally would make a sleek matt grey one with a cooling fan and openings in the top for gpio pins and camera module, screen module etc ports, with an in built thin profile battery for backup power. But great video for inspiration. Loved the vertical stand idea.
Hello bro remember me? I saw you from the very beginning but had to disconnect for sometime due to studies But I have to say the production quality has increased a tonn since then... Loved to see you grow ❤️
Curious what you call those supports in the dome tome case. The one where you cut your finger… I printed it without supports and though it will work, it doesn’t look too good… Sorry for the newby type question but I’m just getting started in this stuff… thanks for the great video…
I am looking for one 3D-printer case for my IOT-set which is a combination of a) Unit-1: raspberry-pi+raspberrypi-camera+HCSR04P-sensor b) Unit-2: displayscreen. I want to merge Unit-1 + Unit-2 and want to develop a case for it. WOuld you be able to help engineericly ?
I am trying to get a nice case for the Raspberry Pi 3b+ terra pi setup. It has a hard drive and the board. The option that was included with the TerraPi kit is verticle and very awkward. It doesn't stay together well when moving it. And looks bad in general. I am hoping for a mount that has the drive on the bottom, and the Pi on top of the Terra Drive. While making the audio and HDMI ports, USB ports, all functional too.
Awesome video.......downloaded a few files for my needs. One question though.....where did you get the assortment box with bolts,nuts and washers from?
Some of those are really nice. Thanks for sharing them. Feedback: 10 - as nice as it is, if the ethernet (and USB) ports are at the top it could be a bit unsteady. Would it be better to have the machine so the power cord plugs in either at the top or bottom I guess this depends if the machine will have an HDMI cable plugged in to it also.
thanks i had been looking for a case. love your videos btw! ps with the support ive found a small flat head screwdriver helps alot with support removal and not getting cut. how do you do thoes support blocks? it would make support removial easier!
Nice video, but I've been using my Raspberry Pi Model B+ (Yes, the first version). Would you happen to have a version of the last case for it? I'll pay for the files and for your time.
Can someone design case to pi5 ---) details ---) nvme duo max 2tb ram at bottom of the pi and standard fan on top ( I wish top to be acryllic so that fan can be seen by me and ppl and bottom/ walls of the case argon/metal, (ready to buy XD
Which one did you like the most? 🙂
The one you put in Thumbnail of your Video 👌
@@hadiavlogofficials Thanks for the answer!
@@engineericly Always welcome Brother 🥰
No. 8 This color, big Raspberry logo and the idea of hanging device on the wall. Great work.
I liked the phone box and the low profile thing. I'm more into functions with my own stuff. In a sense a whole lot is missing in the RPi world. A power bank should snap onto a case like Lego or with magnets and separate easier for long trips in Norway. Add "snow cooling" or something and 3 extensions of the GPIO which everyone likes, but there is only one (usually) and stacking the RPi stuff makes it a high tower so you can't take it with you on a bicycle.
Some really great designs. The last one is my favourite.
And yes, make a second part.
Thank you for your feedback man!
This is so cool!!!
THank you for your feedback :)
Can you please link this awesome screwdriver?
That was actually amazing
Please!
Hello, here is the link: geni.us/motorized-screw-driver
It is my affiliate link, it will not affect the price but help my channel if you buy :)
@@behlaburhani231 I have added
@@amadoutoure9420 I have added
I loved all but personally would make a sleek matt grey one with a cooling fan and openings in the top for gpio pins and camera module, screen module etc ports, with an in built thin profile battery for backup power. But great video for inspiration. Loved the vertical stand idea.
Hello bro remember me?
I saw you from the very beginning but had to disconnect for sometime due to studies
But I have to say the production quality has increased a tonn since then... Loved to see you grow ❤️
Hello, Of Course yes, I Do!
Thank you for giving attention, happy to hear that!
🤭😅Usually ...like it...When Sir...you are Talk about...(( Di's iz 3D printed))👍🏻🥰😇🤷🏻♀️😇🤩
Nice, many cool designs
Very cool. Thanks.
Glad you liked it!
Curious what you call those supports in the dome tome case. The one where you cut your finger… I printed it without supports and though it will work, it doesn’t look too good… Sorry for the newby type question but I’m just getting started in this stuff… thanks for the great video…
wow cool prints🔥🔥
Thank you!
A nice video
Thank you for your feedback :)
Nice!! 👍👍👍
I am looking for one 3D-printer case for my IOT-set which is a combination of a) Unit-1: raspberry-pi+raspberrypi-camera+HCSR04P-sensor b) Unit-2: displayscreen. I want to merge Unit-1 + Unit-2 and want to develop a case for it. WOuld you be able to help engineericly ?
last one is best one
I want a case for my Raspberry Pi Zero W with BadUSB
Tried finding it but couldn't. Pls send me a link of you find.
Thank you for linking the electric screwdriver, could I have the screws you used in this video?
Cool video but what's with new theme of 'throwing components/thing into frame is cool'
What.kind of printer 3d the ender 5 pro?Abs o pla ?nice design!
Part 2 please
I am trying to get a nice case for the Raspberry Pi 3b+ terra pi setup. It has a hard drive and the board. The option that was included with the TerraPi kit is verticle and very awkward. It doesn't stay together well when moving it. And looks bad in general. I am hoping for a mount that has the drive on the bottom, and the Pi on top of the Terra Drive. While making the audio and HDMI ports, USB ports, all functional too.
Maybe start with finding a raspberry pi first....
😜
Awesome video.......downloaded a few files for my needs.
One question though.....where did you get the assortment box with bolts,nuts and washers from?
Thank you.
From Aliexpress,
Here are my suggestions: geni.us/bolt-nut-set
Please print pokemon toys
Where can I get that screw kit?
geni.us/motorized-screw-driver
@@engineericly thats cool also but I meant the assorted kit of screws you had
So right now we are only having this case withou any Pi 4 XD, im gonna put my pi zero 2 into this
Some of those are really nice.
Thanks for sharing them.
Feedback: 10 - as nice as it is, if the ethernet (and USB) ports are at the top it could be a bit unsteady. Would it be better to have the machine so the power cord plugs in either at the top or bottom I guess this depends if the machine will have an HDMI cable plugged in to it also.
Do these cases also work for raspberry pi 3 b+?
thanks i had been looking for a case. love your videos btw! ps with the support ive found a small flat head screwdriver helps alot with support removal and not getting cut. how do you do thoes support blocks? it would make support removial easier!
hi
Hey man!
Nice video, but I've been using my Raspberry Pi Model B+ (Yes, the first version).
Would you happen to have a version of the last case for it? I'll pay for the files and for your time.
You must be careful when you use sharp material for cleaning the models
Yes, Thank you!
What turntable is that?
Wont the PLA get damaged over time because of heat? isent PETG better suited?
What printer?
Link for the screw driver set , please.
What material did you print these in? Cause i know certain filaments can warp at the temperatures of the raspberry pi
Hello, I used PLA for better filming experience, but I would suggest to do it with PETG or other heat resistant materials
@@engineericly ok thanks
I wish I could buy another RPi4 8Gb to put in a new case
cuando te aburres y no tienes nada que hacer
What is raspberry pi?
It's a hacking device, capable of hacking the Pentagon.
Can someone design case to pi5 ---) details ---) nvme duo max 2tb ram at bottom of the pi and standard fan on top ( I wish top to be acryllic so that fan can be seen by me and ppl and bottom/ walls of the case argon/metal, (ready to buy XD
🔥💕👌👍
Thank you so much!
screwdriver!!! brand name and model?
geni.us/motorized-screw-driver
Thx !!
Name music?
The best designs, the shitiest printing quality
物をぶん投げるな。
Get rid of the music