Did you have to trim the plastics after flipping the shocks? Just ordered the washer kit for my BM 2.0 windshield so curious how it has been doing since your install and your trail rides.
Can you show final install location? I can't find a good place to put mine. I have a similar machine but orange. I'm thinking Velcro instead of zip ties but wanted to see your final. Did you drill holes to run the zips through or what? I just can't see how you connected it without obstructing the mount onto the bracket. Thanks!
Good little washer kit , it will definitely come in handy out on the trails . Hope all is well Mr Mike and the boys.
Thanks Peter! Yep for the price of the kit you cant beat it. Thanks for watching!
Go get you a 2001-2006 ford escape rear wiper motor it was a way better 172 degree sweep and would get your whole window.
The fan still pulls the hot air out fine?? No issue cooling? Just mounted mine in the same spot now looking at your vid. Going to test this weekend
Where you got the power for the wiper and the reservoir
Did you have to trim the plastics after flipping the shocks? Just ordered the washer kit for my BM 2.0 windshield so curious how it has been doing since your install and your trail rides.
No I didn't have to trim the plastics because mine is the 64 inch model. I believe on the 72 inch models the plastic will need trimmed.
Ok...so where did you get the kit from (Important ilnfo) and how much?...I'm in the process of getting one and I'm curious...THANKS!!
I have links in the description of the video for all parts.
what size light bar is that yall got attached to the shocks
It is a 10 inch Baja Design light bar.
Can you show final install location? I can't find a good place to put mine. I have a similar machine but orange. I'm thinking Velcro instead of zip ties but wanted to see your final. Did you drill holes to run the zips through or what? I just can't see how you connected it without obstructing the mount onto the bracket. Thanks!
I don't have a picture of it but if you look at time mark 5:32 in the video it shows how I mounted it. Hope this helps. Thanks for watching!
Wow all that work for a washer, good job though
Yeah it wasn't to bad. Probably took about an hour to do the job. Thanks for watching!
Nice job, I'm going to do the same. Question what is that controller you have that you used for the Switch, I'm looking for something similar.
@@steveoptebeke2955 Thanks! I did a video on the Feniex Controller when i installed my chase lights. Check it out.
How do I wire the switch if I want to use the switch they give me? the ground goes to the bus bar ground where does the other wire go?
You have to run the switch wire and washer pump wire together and run it to the hot to get power.
So the machine works the exact same by flipping the shocks? Its no big deal?
Yes no problem at all.
Would have been nice to see it actually work
Did you actually watch the whole video? I demonstrate it working at 11:37 mark in the video.
by the time you buy all this crap you are better off just buying a cheap jeep that you can drive anywhere 100mph if you want.