You can just measure the inside/outside length of the elbow and divide it by 90 and you get a 1 degree section of the elbow. Multiply that with any angle you want and you have your measurement.
Hello sir how are you fine I hope you good and your family sir I have one question if you like me answer sir have a long radius elbow 90 degree I need inside or outside radius how to find radius 90 degree elbow outside and inside without elbow any calculation physically so please if you have not tell me thank you
Outside radius will not changed,Only inside radius will change based on Elbow schedule(Thickness) Pipe Fittings Dimension Chart yt3.ggpht.com/LTQ7G0y2p6CSHkum-PyNY-ApYSFwFsGKw_N_AS1nZv9bHV-2R3kMLIncNohnR6vOjRQgRaEy4vers00=s1581-nd
The easiest way..Meassure from outside..example;560:90degrees multiple with angle what you need..make marking!Than do that from inside same procedure!Connect two lines with meassure tape and start fckn cutting!Why everything have to be complicated when there is a 1000easier ways.
So you imagine four 90 degree elbows making a circle and then use the circles diameter to figure out the circumference and then divide it with 360 to get one degree section of the circumference and then use this section to make any measurement from 1 to 90 degrees. Well it is kinda obvious now when you showed it. I'm more concerned about the drawing of the line on the elbow... how the hell do I do that... I've used string but its kinda fussy.
You can just measure the inside/outside length of the elbow and divide it by 90 and you get a 1 degree section of the elbow. Multiply that with any angle you want and you have your measurement.
This totally worked. A thousand blessings be upon you and all that stuff. : )
This video helped me at work! Thanks!
How it has worked?
Elbow trunnion dummy support layout view sir....
Dear
is this formula is applicable for the cutting length of elbow in horizontal and vertical rollings ?
yes,you can use it..
how we will cut 17 degree elbow from 15 degree elbow
we cant cut from 15 deg to 17 deg.
Gud day sir can i ask if we can use this formula in any degree cut??or this is just for 60 degree?
For any degree.In this video show example calculation for 60 degree
measure the heel and throut devide by 90 degrees and multiplay by the angle u want
Hello sir how are you fine I hope you good and your family sir I have one question if you like me answer sir have a long radius elbow 90 degree I need inside or outside radius how to find radius 90 degree elbow outside and inside without elbow any calculation physically so please if you have not tell me thank you
Outside radius will not changed,Only inside radius will change based on Elbow schedule(Thickness)
Pipe Fittings Dimension Chart
yt3.ggpht.com/LTQ7G0y2p6CSHkum-PyNY-ApYSFwFsGKw_N_AS1nZv9bHV-2R3kMLIncNohnR6vOjRQgRaEy4vers00=s1581-nd
Can't understand.please speak while you explain.it makes good sense to which comes after and after.thanks.
+Sachi Kumar ok.
Technical Piping please x plain
thanks mama
The easiest way..Meassure from outside..example;560:90degrees multiple with angle what you need..make marking!Than do that from inside same procedure!Connect two lines with meassure tape and start fckn cutting!Why everything have to be complicated when there is a 1000easier ways.
Just buy an elbow cutting fixture from Sequence Manufacturing or Stainless Bros
Good evening sir
i have a how to cut elbow shoe cut video please send video sir
Can you show me an easy way to lay out the actual elbow, on paper is easy.
ok.
Just guess it a good Welder will fill in the gaps simple bring a bag of sweets love sweets Welders do
what is the maximum diameter and thickness of tube and pipe
How to measure the values of A1, A2, A3 on elbow with tap
this is accurate cutting but long way ,
helpfull
Music band ho ga to achi understanding ho gii
lol they have a lot to learn doing this
sir chainal Ko 45degree me kaise marking kare kripya Aab ek video dal de jiye ple sir
So you imagine four 90 degree elbows making a circle and then use the circles diameter to figure out the circumference and then divide it with 360 to get one degree section of the circumference and then use this section to make any measurement from 1 to 90 degrees. Well it is kinda obvious now when you showed it. I'm more concerned about the drawing of the line on the elbow... how the hell do I do that... I've used string but its kinda fussy.
ok.By this method we can cut the elbow with accurate.
Better and faster way is tan1×given degree(R+od/2) for outer radius on elbow and
Tan1×given degree(R-od/2) for inner radius....
Welcome Mr.Bokkala
here, i was explain the basic method.
so that we can make more alternative methods and formula.
भाषामराठीतकरा
381x2x3,1415=2394/360=6,65x60=339 (no 420)
Excellent tutorial.
I got a different result
Where am I wrong?
A1 = R1x60 / 1rad. = 542.4
A2 = R2x60 / 1rad. = 398.9
A3 = R3x60 / 1rad. = 256.5
60 ° overall curve = tan. (60/2) XR2
1rad. = 360 / (2x3.14)
A2 not necessary for practical tracking
Thank you
9*60 =540
music is not good
Bohot bekar lag raha ye music band karo.
Don’t explain anything 👎
Btw how to measure mid section in the real world ???
for me don't use mid section
helpfull
music is not good