Thanks for the tutorial. I installed the same fork (I think because it's the same brand), but now when I brake hard the wheel move to the left (brake disc side). Do you have the same issue ? I notice that In your video, the old fork has a "shoulder" for the axis on the brake disc side like mine... and the new one doesn't have that...
Thank you for your comment. I didn't have any problems with the plug. If you have a badly fixed wheel, try gently going over the places where the wheel axle fits with sandpaper or put washers. Check that the wheel axle is perfectly straight in the fork, sometimes these forks are slightly crooked.
The weight has been reduced by 1.1 kg compared to the Manitou fork. The main goal was not to reduce weight, but to provide a fork that can be ridden at sub-zero temperatures without ruining it 😺
1,1kg x 7kg = 7,7kg wagi jeźdźca. Gdzies w necie znalazłem taki przelicznik. Inny to: 1 kg wagi roweru, jest równoważny 10 kg wagi jeźdźca. Jednak ten przelicznik wydaje mi się zawyżony, więc skłaniam się ku pierwszemu :)
I'm also wondering about this fork, do you think it will handle a heavier e-bike? the weight of the bike is 25 kg and the weight of the rider is 90 kg, trekking bike and riding mainly on public roads and light terrain 🤔
What size is the wheel and fork? I’m a bit confused with the toseek fork sizes as they carry 26,27.5 and 29 but someone said the 26 fork can also accommodate 700c*40 and apparently in your video the fork has lots of room to handle bigger wheels, right?
This fork is for 27.5 wheels, the wheel in the video is also 27.5. It used to fit a wheel with a 700x50 mm tire, but the seat on that bike was very low and there were problems with the cyclist's back. The 26 fork can accommodate 29 wheels, but then the handlebars will be very low.
Nice fork, after the race it fell apart) I went for a ride on it today.) Share my videos with your friends, it will help the development of the channel! 😘
Też jestem dość pedantyczny w serwisowaniu roweru. Mam dwie uwagi: 1. tak bym roweru za siodełko żadnego nie wieszał, 2. klamki QR nie zamykałbym równolegle wzdłuż widelca ;) Bo ciężko potem uchwycić by otworzyć to raz (no dobrze, można paskiem ;) a dwa, istnieje ryzyko zarysowania golenia widelca. Pozdrawiam 🫡
El dueño de la bici tenía una de estas😉 Con el juego adecuado de anillos de columna de dirección, también puedes usar una horquilla de potencia recta, no hay problema
![โรงเรียนห้ามรัก โดนจับได้ตาย...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/4u02Sbr556Q/mqdefault.jpg)
⚠ ❓ ⚠
*ASK YOUR QUESTIONS*
👇👇👇
My new toseek fork got brake caliper not in line with the mount
How can I fix it
3:00 why?
Excellente tutorial !!! Muchas gracias desde Buenos Aires, Argentina. Excellent tutorial !!!. Thank you very much from Buenos Aires, Argentina.
La verdadque el video super completo, muy bien hecho, saludos desde Uruguay.
Gracias por su amable comentario. Saludos desde Ucrania 🇺🇦😸👍
Would love to see more of this bike how it rides with that fork.
The bike was returned to its owner. She rides this fork in the winter so as not to spoil the air-oil system.
👍🫡🙋 Moim zdaniem tj. najlepszy kanał o serwisowaniu rowerów w całym YT :) Gratuluję i dziękuję Ci za te filmiki :)
Thanks for the tutorial.
I installed the same fork (I think because it's the same brand), but now when I brake hard the wheel move to the left (brake disc side). Do you have the same issue ?
I notice that In your video, the old fork has a "shoulder" for the axis on the brake disc side like mine... and the new one doesn't have that...
Thank you for your comment. I didn't have any problems with the plug. If you have a badly fixed wheel, try gently going over the places where the wheel axle fits with sandpaper or put washers. Check that the wheel axle is perfectly straight in the fork, sometimes these forks are slightly crooked.
Nice job, well done. How much weight could you reduce? Did you calculate?
The weight has been reduced by 1.1 kg compared to the Manitou fork. The main goal was not to reduce weight, but to provide a fork that can be ridden at sub-zero temperatures without ruining it 😺
1,1kg x 7kg = 7,7kg wagi jeźdźca.
Gdzies w necie znalazłem taki przelicznik. Inny to: 1 kg wagi roweru, jest równoważny 10 kg wagi jeźdźca. Jednak ten przelicznik wydaje mi się zawyżony, więc skłaniam się ku pierwszemu :)
I saw the mallet being used to put the headset in and I was like oh, must not have it headset press. Seconds later pulls out a headset press.
I'm also wondering about this fork, do you think it will handle a heavier e-bike? the weight of the bike is 25 kg and the weight of the rider is 90 kg, trekking bike and riding mainly on public roads and light terrain 🤔
If your motor is not in the front wheel, then you can put it there. For front-wheel drive, I do not recommend
What size is the wheel and fork? I’m a bit confused with the toseek fork sizes as they carry 26,27.5 and 29 but someone said the 26 fork can also accommodate 700c*40 and apparently in your video the fork has lots of room to handle bigger wheels, right?
This fork is for 27.5 wheels, the wheel in the video is also 27.5. It used to fit a wheel with a 700x50 mm tire, but the seat on that bike was very low and there were problems with the cyclist's back. The 26 fork can accommodate 29 wheels, but then the handlebars will be very low.
What's your long term impression of this fork, I've just ordered one for my hybrid
Nice fork, after the race it fell apart)
I went for a ride on it today.)
Share my videos with your friends, it will help the development of the channel!
😘
I have the same fork, does you fork is ok and has no failed?
The owner of the fork is riding and doing well👍
Też jestem dość pedantyczny w serwisowaniu roweru.
Mam dwie uwagi:
1. tak bym roweru za siodełko żadnego nie wieszał,
2. klamki QR nie zamykałbym równolegle wzdłuż widelca ;)
Bo ciężko potem uchwycić by otworzyć to raz (no dobrze, można paskiem ;) a dwa, istnieje ryzyko zarysowania golenia widelca.
Pozdrawiam 🫡
Question, how much weight was dropped or added?
this fork has weight 540 gramms( about 510 gr if shorten)
3:00 Why not use the crown bearing race from the suspension fork?
Because the new headset was sealed bearing?
@@NiceBikeService Great vid ! What sealed bearing kit did you use ? I'm struggling to find one with slotted bottom ring for carbon fork ?
Olá qual graxa vç utiliza?
@@edinaldorodrigues4680 podes usar uma generica eu recomendo a copper da muc off
Porwue una horquilla recta en un cuadro cónico ?
El dueño de la bici tenía una de estas😉 Con el juego adecuado de anillos de columna de dirección, también puedes usar una horquilla de potencia recta, no hay problema
Чи рекомендуєте ці вилки?
нормальна вилка, але треба брати з алюм штоком!
Can you send link for this accessory parts to mount this fork?
not used tooth paste
😹