I learned of Missouri tactical through your vids and finally installed grip and butt stock pad this weekend after them sitting for about a year. Wish I would've rewatched this vid. I managed to get grip on with brute strength and my 10-8 1911 armorer's tool as the "shim" to help get it on. Both feel great, can't wait to shoot with them on.
Not a good idea to cover all the M lock holes. If you do it doesn’t give the firearm ability to breathe and it’ll get too hot in there. Just cover the part that you’re going to grip.
Thanks for this video I have a keltec gen 2 sub 2000 and I clicked on your links below and bought these accessories for my sub 2000 and I love them. Keep up these helpful videos.
Thanks for Subscribing. I just tested and posted a review of the new MoTac Recoil Buffer, I hope you picked one of those up too? th-cam.com/video/DAWL1ilImgM/w-d-xo.html
Interesting but I think I will have to pass I installed a Hogue hand grip on my G-17 model and it works well for my needs I do think that I would like to have the butt pad cover because even though it’s only a 9 mm it does kick a little after shooting it for a while. Thanks for sharing and bringing these accessories to our attention.
Not sure if you’ve heard of MCARBO but they have a bolt tube cover, which works well btw. If you have the bolt tube cover along with the picatinny cover, will definitely prevent it from latching. I also suggest mcarbo’s recoilless charging handle.
Comment with a link when it's done. I just hope TH-cam's algorithm lets you post a link to your vid. Sometimes it will just delete posts with video links in them.
The only problem I see with the picatinny rail and M lock covers is they don't allow the barrel to cool down after extended firing and it does get warm. The Missouri Tactical butt stock is great. I changed the MCarbo butt stock pad out as it hindered pulling everything out the rear when cleaning as it is screwed into the Kel-Tec butt stock. I have a question regarding the kel-tec you are using for the demo, What is the L shaped metal piece running by the trigged and then slanting upward past the trigger guard ???
True, I would not cover all the side vents. But it's not like you're firing a full-auto rifle ether. Unless you're iraqveteran8888 doing a torture test. ;-) Oh, that L-shaped thing is the Patriot Mag Release. It's a mag release-blocking device to comply with a dumb CA "Assault Rifle" law.
I really enjoy watching your videos dude, so thank you. Wanted to ask a couple of questions regarding the Kel-Tec sub-2000 as I'm considering to buy one but heard not so good for long range. 1. How far did you shoot it? 2. Is it accurate?
I shoot it mostly at 100yrds because that's the distance the public can shoot at, at my home range. For a 9mm non-match I can get about 3-5" groups shooting from a bench. I think in a video by Iraqveteran8888 he was shooting his Sub2K more than 300yrds.
It does reduce air colling of your barrel. But unless you're shooting 4 or 8 mags full auto in some firefight, that build of heat shouldn't hurt your rifle. I only covered up half (where I hold the rifle).
@@jonthornton4972 I think it's going to look the same as the close-up if you pause the video at 9:43 and at 9.48 or at 9:58 Also take a look at my other video: th-cam.com/video/GrKnXui0z_c/w-d-xo.html
It's a CA compliance accessory that I was trying on the Sub2K but I have since removed to try out a new grip. studio.th-cam.com/users/videoWtaGTfN_XVw/edit
Missouri Tactical just took shit made for other guns and tried to market it to Sub2000 owners without ever trying it. Kind of laughable. The MLok covers should be 5 spaces long instead of 3. The picatinny covers don't work at all for this role. Glad I didn't waste my money on their products. That grip is ridiculous. Not even the right shape.
I learned of Missouri tactical through your vids and finally installed grip and butt stock pad this weekend after them sitting for about a year. Wish I would've rewatched this vid. I managed to get grip on with brute strength and my 10-8 1911 armorer's tool as the "shim" to help get it on. Both feel great, can't wait to shoot with them on.
I'm glad you got it on
For the grip use a blow dryer to make them softer it makes it so easy to get them on.
And soap will work as well.
Boiling water + Windex are your best friends for grip install
The grip is plenty elastic without heating it up. Almost too stretchy.
Not a good idea to cover all the M lock holes. If you do it doesn’t give the firearm ability to breathe and it’ll get too hot in there. Just cover the part that you’re going to grip.
"laughs in quad rail"
Didn't know
Thanks for this video I have a keltec gen 2 sub 2000 and I clicked on your links below and bought these accessories for my sub 2000 and I love them. Keep up these helpful videos.
Thanks for Subscribing. I just tested and posted a review of the new MoTac Recoil Buffer, I hope you picked one of those up too? th-cam.com/video/DAWL1ilImgM/w-d-xo.html
Amen Brother! Thanks Moondog!
These same accessories can also be used on your iPhone.
picatinny rail for iPhone? Shut-up and take my money!
Interesting but I think I will have to pass I installed a Hogue hand grip on my G-17 model and it works well for my needs I do think that I would like to have the butt pad cover because even though it’s only a 9 mm it does kick a little after shooting it for a while. Thanks for sharing and bringing these accessories to our attention.
Cover on top rail will put stress on hinge.
I use a hairdryer to heat it before installation makes it easier to stretch to put on
Good suggestion. Hope you subscribe.
Not sure if you’ve heard of MCARBO but they have a bolt tube cover, which works well btw. If you have the bolt tube cover along with the picatinny cover, will definitely prevent it from latching. I also suggest mcarbo’s recoilless charging handle.
Would you say the recoil less charging handle takes a lot of kick off?
The grip covers work great on my beretta px4 storm as well.
I used a hair dryer to get the Houge grip on my p365 it was very easy.
Please subscribe. Just heat, no dish soap or plastic shims?
New sub here. Just purchased mine. I have some great ideas for mods, will post a video when done. Thanks for the video.
Comment with a link when it's done. I just hope TH-cam's algorithm lets you post a link to your vid. Sometimes it will just delete posts with video links in them.
The only problem I see with the picatinny rail and M lock covers is they don't allow the barrel to cool down after extended firing and it does get warm. The Missouri Tactical butt stock is great. I changed the MCarbo butt stock pad out as it hindered pulling everything out the rear when cleaning as it is screwed into the Kel-Tec butt stock. I have a question regarding the kel-tec you are using for the demo, What is the L shaped metal piece running by the trigged and then slanting upward past the trigger guard ???
True, I would not cover all the side vents. But it's not like you're firing a full-auto rifle ether. Unless you're iraqveteran8888 doing a torture test. ;-)
Oh, that L-shaped thing is the Patriot Mag Release. It's a mag release-blocking device to comply with a dumb CA "Assault Rifle" law.
@@Moondog2A OK, I didn't know what it was, but California now I know
@@richardsmith4187 Yeah, CA sux for gun owners
@@richardsmith4187 Yup. Reason #1047 why California sucks!
Spend your money on a trigger upgrade, feed ramp upgrade, optic and magazines. Just my opinion
I never understood the need to upgrade the trigger and feedramp from a stock KelTec until something breaks.
I really enjoy watching your videos dude, so thank you. Wanted to ask a couple of questions regarding the Kel-Tec sub-2000 as I'm considering to buy one but heard not so good for long range. 1. How far did you shoot it? 2. Is it accurate?
I shoot it mostly at 100yrds because that's the distance the public can shoot at, at my home range. For a 9mm non-match I can get about 3-5" groups shooting from a bench. I think in a video by Iraqveteran8888 he was shooting his Sub2K more than 300yrds.
Subbed‼️🔥🔥🔥
Awesome man, thanks!
Wouldn't the side covers stop the air flow?
Slow, not stop. And there's no reason to cover all of the side slots. Just cover the areas you normally hold.
Yes
The link doesn’t work anymore could you provide us with another one
Thanks for the heads up
5% Discount Code: 05moondog
Picatinny Rail Cover (black): motacpro.com/shop/ols/products/super-low-profile-rail-guard-set-of-3-for-picatinny
M-Lok Cover (black): motacpro.com/shop/ols/products/m-lok-slot-cover
Grip Cover (black): motacpro.com/shop/ols/products/a2-pistol-grip-sleeve
Grip Cover (FDE): motacpro.com/shop/ols/products/a2-pistol-grip-sleeve-fde-color
Recoil Pad (black): amzn.to/3xjprWB Recoil Pad (FDE tan): amzn.to/4aFAFTG
Hot water my dude
What is that bracket covering your mag release at 6:30??
It's a Komifornia compliant accessory called the Patriot Mag release (Gen 1) th-cam.com/video/WtaGTfN_XVw/w-d-xo.html
Will still install on newest sub2000 Gen 3?
Not in the new Cali edition. The grip fin makes most grip covers impossible to put on. Please subscribe.
Is it ok to cover all the openings with the m lock covers?
It does reduce air colling of your barrel. But unless you're shooting 4 or 8 mags full auto in some firefight, that build of heat shouldn't hurt your rifle. I only covered up half (where I hold the rifle).
Ok thank you for the info.
Yes, if you want your polymer handguard to melt
What are you using to cover the unused adjustable stock holes?
Wilde Built Tactical who I bought it from did the setup. It's some sort of metal studs?
@@Moondog2A can you send a close up picture of it?
@@jonthornton4972 I think it's going to look the same as the close-up if you pause the video at 9:43 and at 9.48 or at 9:58
Also take a look at my other video: th-cam.com/video/GrKnXui0z_c/w-d-xo.html
What’s that extended mag release ???
It's a CA compliance accessory that I was trying on the Sub2K but I have since removed to try out a new grip. studio.th-cam.com/users/videoWtaGTfN_XVw/edit
50 shades of FDE
Every company has their own version of what FDE looks like. I hope you subscribe.
Warm up the grip in hot water
That helps. Though this grip wasn't as difficult as my Glock 17.
Missouri Tactical just took shit made for other guns and tried to market it to Sub2000 owners without ever trying it. Kind of laughable. The MLok covers should be 5 spaces long instead of 3. The picatinny covers don't work at all for this role. Glad I didn't waste my money on their products. That grip is ridiculous. Not even the right shape.
It's an A4 grip cover. I was curious to see if it would fit on my S2K and it did?
Cheap Cheek guard
I used a 10$ Blackburn eco bike grip!
Your justification for pic rail covers are comical.
Humor is mankind's greatest blessing.
- Mark Twain
So this is a absolute hot mess, the pad is cool but thats about it.
PROMO DISCOUNT CODE (expires December 20, 2020)
5% Off on Amazon and motacpro.com use Code: 05moondog
These are really useless upgrades a waste of money.
Merry Christmas