Great video you have a good voice for teaching, but like others mentioned, the device says it only measures up to 1000ppm, how is it displaying higher than this and a 2.3 EC this is way higher than 1000ppm. You even mention the max output is 1000ppm, so if the full voltage at 5v is 1000ppm how is it reading higher on the video. Thank you
Correct me If I'm wrong : The TDS Sensor you're using has a maximum reading range up to 1000 ppm, right? I just wanted to know how come it could have a reading up to 1195 ppm at 1:48 ? Hope this question is not offending :/
@@CraigTalon Yes, i calibrated a cheap TDS pen with proper solution then configured the probe. I'm not measuring anything above 1000PPM (2 EC) so can't yet comment but when i set it up again (i had problems with the pH sensor and this in the tank at the same time due to EMI) i'll do a heavy saltwater test and see how far it can be pushed. I bought it cheap from ebay : www.ebay.co.uk/itm/Analog-TDS-Sensor-Water-Conductivity-Sensor-Tester-Liquid-Detection-Arduino-BSG/124356193622?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
I'm not speaking English but no problem because i still understand whats your mind, this video very helpful for me, I want make a simple gardening with this tools, thank you so much :)
Thank you sir, but i wanna ask you about how sensor tds can read >1000ppm meanwhile maximum range is 1000 ppm ? thank you sir hope you reply my question
the effect of sugar on tds value is depedant on the concentration of water percent of solution so major increase in sugar may have small effects on tds value but i guess this must not be a problem for a hydroponic system.
Great video. The product spec mention that measurement range is up to 1000ppm. But, in your video, it shows >1100ppm. Can I can how is it possible? Thanks
Hi, i got gravity tds meter from DSRobot. It has sensor range from 0 to 1200 ppm, but my sensor sometime can reach to 1800 ppm (9 times in 147 running), can you suggest what should i do? this is for my univ project :) thankyouu
Great video you have a good voice for teaching, but like others mentioned, the device says it only measures up to 1000ppm, how is it displaying higher than this and a 2.3 EC this is way higher than 1000ppm. You even mention the max output is 1000ppm, so if the full voltage at 5v is 1000ppm how is it reading higher on the video. Thank you
Correct me If I'm wrong :
The TDS Sensor you're using has a maximum reading range up to 1000 ppm, right? I just wanted to know how come it could have a reading up to 1195 ppm at 1:48 ?
Hope this question is not offending :/
amazon TDS links not working, so careful..
Good question, mine has just arrived, i'll do some testing and post back results, perhaps his conversion factor for the voltage was off.
@@GaryMcKinnonUFO any update on this please? Looking at getting one myself, but not much use if only goes up to 1000ppm.
@@CraigTalon Yes, i calibrated a cheap TDS pen with proper solution then configured the probe. I'm not measuring anything above 1000PPM (2 EC) so can't yet comment but when i set it up again (i had problems with the pH sensor and this in the tank at the same time due to EMI) i'll do a heavy saltwater test and see how far it can be pushed. I bought it cheap from ebay : www.ebay.co.uk/itm/Analog-TDS-Sensor-Water-Conductivity-Sensor-Tester-Liquid-Detection-Arduino-BSG/124356193622?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
@@GaryMcKinnonUFO
How did it go? Did the sensor work properly?
I'm not speaking English but no problem because i still understand whats your mind, this video very helpful for me, I want make a simple gardening with this tools, thank you so much :)
ya sure i will help you. you can add.me on whatsapp.
@@ElectroniClinic Ok thanks, what your whatsapp 😁
Thank you sir, but i wanna ask you about how sensor tds can read >1000ppm meanwhile maximum range is 1000 ppm ? thank you sir hope you reply my question
Nice project 👍
superb explanation ... great job !! Thanks :)
can I calculate ppm in the range of 1200 - 1800 using this tds sensor?? if not, what sensor should I use to calculate the ppm with that range
the effect of sugar on tds value is depedant on the concentration of water percent of solution so major increase in sugar may have small effects on tds value but i guess this must not be a problem for a hydroponic system.
Awesome project
Ótimo projeto e muito bem explicado. Abraço!
Super project 👍👍👍
Can we use tds and ec sensor both?
Great video.
The product spec mention that measurement range is up to 1000ppm. But, in your video, it shows >1100ppm. Can I can how is it possible?
Thanks
yess i need answer to this too :(
Thank you for this.
how u get reading more 1000ppm , what i see data sheet on tds sensor is 0 - 1000 ppm only
any sugestion for ppm above 1000 ?
let me ask what is the formula for converting TDS to EC? Thank you very much
Can show EC value in 1xxx?
how to decide kc value? Please explain
How this TDS sensor measure EC
Hi, i got gravity tds meter from DSRobot. It has sensor range from 0 to 1200 ppm, but my sensor sometime can reach to 1800 ppm (9 times in 147 running), can you suggest what should i do? this is for my univ project :) thankyouu
Good day
Is it possible to add more sensors to provide more data on the water quality ? I suppose whatr Im asking is can the system be expanded on ?
Ya, of course you can add more sensors.
Thank you. I tried sending a message on your site but there seems to be a problem with the email form. Please can you send me your email address ?
Could you give me TDS Sensor Library for Proteus
Superb
how can i replace the pcb board because i dont have access to order pcb board
circuit diagram is available on my website. you can solder all the electronics on a breadboard
@@ElectroniClinic ok understood. Sorry for the novice question. Thank you very much for your reply
I want to ask sir , what software did you use to make the schematic circuit?
cadsoft eagle
Nice one
Why your aref = 4,3 volts ? shouldn't it be 5 volts?
The 5 volts is just theoretical, in fact he measured from the device that only consumed 4.3 volts
How can I send both sensors data to firebase plz guide
check playlist, i have videos on Firebase.
Sir please provide the code link here
It's available on electroniclinic.com
Suggest a Name For This Experiment.
a great video, really helpful good work. drop me a meassage later, you have dissapeared from fb,
fb account is under review
Lol what did you do?
i was sharing some posts
😉😉😉😉
i opened 10 groups in a minutes 😋😋😋
.