Zero bubbles on my first try... it kind of just connected from the middle to the sides by itself perfectly but i used 3 guides on one side instead on one on each side.. thanks 4 the vid
I followed you step by step and the protector went on perfectly. This is the first time I've used this brand and it's the first one that didn't have pesky bubbles left over. Thanks for helping me do a beautiful job.
Thanks Todd. An extremely clear and well-paced tutorial that really helped me. I wasn't sure which side of the glass protector needed to go against the screen, so your guidance was critical! Loved your calm delivery too. :)
Thanks for your help. I got this brand and Amazon had put inventory stickers all over their English instructions on the box, and the website they said to go to for a video was a broken link, so I appreciated this. Went on perfectly even though it doesn't have an aligning bracket like some other brands.
Great guide. I actually found it easiest to not use the guide stickers at all and just hold all four corners of the protector with my thumbs and forefingers. Everything else went very smoothly.
Thank you, followed the steps and still got a few bubbles, probably atom level spec of dust landed after wiping several times and using the dust absorber sticker. I'm just going to leave it as is because there are only a few and they are tiny. I have another 2 in the pack to get it right next time, just shows I need to dust the room I'm in more. Your guide was perfect and the only reason I failed was on my end. Again, thank you Todd.
You should try and place the guide stickers on one side of the phone like door hinges with the screen protector face down on the phone before you start the cleaning process. Just my opinion.
Thanks for this guide. I have the same pack for my iPhone 12mini and this was the 2nd protector I was using from the pack and thought I'd see if anyone had used the guide stickers because as you said there was nothing in the instructions. I followed your video and didn't have an issue with the same location as your stickers... But I did have the mini so was a smaller screen. Thank you again. 📱
I bought the same one from Amazon. But no Instruction Book! Aren't you supposed to put the Guide Stickers on ONE SIDE of the phone? Then use 2 of them as a HINGE?
The whole reason I looked for this was to get a little more guidance on the guide stickers. You barely touched on it when that was the part that I needed the most. Next time, please give a little more assistance on how to apply (or where) to apply the guide stickers. This was left unmentioned by the manufacturer as well.
Tip for you: 1. Turn on the shower on high heat, open it's door 2. Let the room get super steamy like Mary J Blige 3. Wait around 4 minutes, steam and dust steadily fall down 4. Clinical dust-free room
It says to press down on the center for 10 seconds, did you do that off video? I’ve only put screen protectors on myself like 2 times and it worked out but I get shaky and think I’m going to mess it up!!
This is the worst screen protector that I've ever tried to install! Guide stickers are a joke, the instructions included with the protectors are worthless. the methods provided by Todd are better than the manufacturers but still did not work for me. I tried to install all 3 screen protectors but had issues with each of them, thankfully I bought from Amazon so I can return this garbage!
I put on tons on protectors, from andriods to iphones and ipads and this one laid right down with not 1 bubble in site.. but i did use 3 guides on one side then just removed the rear cover and thru the protector back down on the phone and it was like magic.. i saw the middle just push out the air to the sides and didnt even have to touch it after but of course a cleaned it a bit.
Zero bubbles on my first try... it kind of just connected from the middle to the sides by itself perfectly but i used 3 guides on one side instead on one on each side.. thanks 4 the vid
I followed you step by step and the protector went on perfectly. This is the first time I've used this brand and it's the first one that didn't have pesky bubbles left over. Thanks for helping me do a beautiful job.
.k opoyte🎉😮😅😊
This is the easiest screen saver I’ve used. Went right on. No bubbles.
Totally stress free. Thank you for the tutorial 🙌
Thanks Todd. An extremely clear and well-paced tutorial that really helped me. I wasn't sure which side of the glass protector needed to go against the screen, so your guidance was critical! Loved your calm delivery too. :)
Thanks for your help. I got this brand and Amazon had put inventory stickers all over their English instructions on the box, and the website they said to go to for a video was a broken link, so I appreciated this. Went on perfectly even though it doesn't have an aligning bracket like some other brands.
Great guide. I actually found it easiest to not use the guide stickers at all and just hold all four corners of the protector with my thumbs and forefingers. Everything else went very smoothly.
Appreciate the video, little tips and tricks always help, went on great, thanks! 👍
Thank you, followed the steps and still got a few bubbles, probably atom level spec of dust landed after wiping several times and using the dust absorber sticker. I'm just going to leave it as is because there are only a few and they are tiny. I have another 2 in the pack to get it right next time, just shows I need to dust the room I'm in more. Your guide was perfect and the only reason I failed was on my end. Again, thank you Todd.
Thank you because I was so lost as to how to do this without jacking it up. This screen protector is better than the $50 ones at T Mobile
Thanks for this and the tips on where to place the sticker guides. Super helpful!
Thanks for demonstrating the process. It was very helpful to see someone else go through the process first.
Thank you that was so helpful.
Really appreciate your vid. Very helpful.
Thank yo so much for your guide. It has been really helpful to install the screen protector knowing exactly what to do in every step. Congratulations.
Great video allowed me to fit without ending up with bubbles
You should try and place the guide stickers on one side of the phone like door hinges with the screen protector face down on the phone before you start the cleaning process. Just my opinion.
Thanks Todd! Followed as you're video described and it worked great! - Dave
Thanks for this guide. I have the same pack for my iPhone 12mini and this was the 2nd protector I was using from the pack and thought I'd see if anyone had used the guide stickers because as you said there was nothing in the instructions. I followed your video and didn't have an issue with the same location as your stickers... But I did have the mini so was a smaller screen. Thank you again. 📱
Thank you so much for the demonstration and helpful tips you added after your installation! You helped make this an easy application! 👍
Great job Todd...I suck at this so will try to duplicate your actions as I have just bought from the same company for my Samsung.
I have no instructions in my box. Thanks for the video!
So easy to follow, worked as described. Thanks Todd
Thanks Todd! x 2
Nicely done. Thank you very much for sharing. God bless you.
I bought the same one from Amazon. But no Instruction Book! Aren't you supposed to put the Guide Stickers on ONE SIDE of the phone? Then use 2 of them as a HINGE?
wow your video made this job super easy thanks
super useful tutorial. thank you.
I like your careful approach to the installation and encouragement to clean the screen completely.
Exactly what I needed. Thank you.
Awesome video, I did it on the first try!
The whole reason I looked for this was to get a little more guidance on the guide stickers. You barely touched on it when that was the part that I needed the most. Next time, please give a little more assistance on how to apply (or where) to apply the guide stickers. This was left unmentioned by the manufacturer as well.
Thank you for the tutorial
Thank you!
Little bit of explanation clarifies everything.
very helpful!
Tip for you:
1. Turn on the shower on high heat, open it's door
2. Let the room get super steamy like Mary J Blige
3. Wait around 4 minutes, steam and dust steadily fall down
4. Clinical dust-free room
Fire 🔥
Thanks.
It says to press down on the center for 10 seconds, did you do that off video? I’ve only put screen protectors on myself like 2 times and it worked out but I get shaky and think I’m going to mess it up!!
Why 3 protectors required while the technician showing us fixing only one??
Reserve
The screen protector may crack if dropped. If it does, you have 2 replacements.
Respekt 👍
This is the worst screen protector that I've ever tried to install! Guide stickers are a joke, the instructions included with the protectors are worthless. the methods provided by Todd are better than the manufacturers but still did not work for me. I tried to install all 3 screen protectors but had issues with each of them, thankfully I bought from Amazon so I can return this garbage!
Got to learn how to put screen protectors on my man that’s not the brand or the screen protector it’s you , no offense anything hope Nun was taken
I put on tons on protectors, from andriods to iphones and ipads and this one laid right down with not 1 bubble in site.. but i did use 3 guides on one side then just removed the rear cover and thru the protector back down on the phone and it was like magic.. i saw the middle just push out the air to the sides and didnt even have to touch it after but of course a cleaned it a bit.
Ez Pz
🤓