"Grilling on this Weber is going to be much easier than putting it together." No kidding. Did anybody at their factory try putting those legs in place? Thanks for your review!
oh yea I recently bought this, and the leg parts clearly had manufacturing defects where it was very clear it would not fit in. I had to essentially grind some of the metal in order to get those legs in. It's been about a little over a month for me, I have grilled 10 times, LOVE it. had the best grilled Salmon of my life on it.
@@StephenMoreira we had the same exact situation and had to grind the legs thanks for the encouragement it better be worth it! :) definitely going to try some salmon!!
@@bestkitchenreviews i love your no nonsense style you're straight to the point with great information and helpful tips! You deserve way more views and comments. Grill is assembled now, on to cooking chicken from your next video. Thanks so much!!!
I'm here in 2023 because MY 22" Weber Kettle Grill didn't come with assembly instructions, just the owners manual. This vodeo was super helpful in getting mine put together, thank you. Only change I would make would be to use a cooking oil to help get the legs in. I ended up using avacado oil, since that is what I cook with the most. Keep sharing!
Wonderful! there are so many counterintuitive things here and yes, those legs had me crying in despair. But your candid, dryly understated instructions made a huge difference.
@bestkitchenreviews I assembled a webber grill yesterday for a senior citizen, and I told her about your video. Took me about 40 minutes with no problems. Thank you once again.
Bravo, finally someone gets the video correct and easy to follow! Those clips in the legs are a PIA! even for a mechanic. One clip kept sliding down the tube, every time (was bent). Come on Weber, get it together. Also charge $1 more and use stainless screws. I mean the whole assembly is aluminum and very well painted steel and virtually rustless and then they use a cheap non stainless screw for the handle. Anyhow, end of rant. The Weber is still a great value, it can smoke a Pork butt as well as any grill if you get everything layed out right. I like the new heat shield on the handle. My last one lasted 12 years outside, although the aluminum parts that close off the air and ash on the bottom failed after just a few years. Too thin for the heat. Ultimately, the where the legs slide in rusted and my Weber just fell over. Another $5 fix Weber could make.
@@bestkitchenreviews I see what you meant by those non helpful BS instructions and those legs 🤬 but your video REALLY helped me out today! 😁 Thank you SO much!!! Now, grilling time👌
Perfect guide! Thank you so much. I didn't even use the instructions because of your video. I thankfully had a super easy time with the legs using a quick back and forth motion, but I seemingly had a tougher time with the hub caps. Can't wait to fire this up and try your chicken thigh recipe
Thanks for the brilliant video. I got lucky getting the legs in pretty much first time. In the U.K my model has split pins to hold the wheels on so I did have a slight panic when I couldn’t find the bag with the hubcaps in. All sorted after a quick look at the instructions. Just need some sunshine to get cooking. Cheers!
They used to come with 2 handles. Not anymore, yet cost $100 more. Seems everyone has a hard time getting those legs in. Solid, once they're in place though. Just bought another one today. Hopefully it will last pretty much forever like the ones I currently own... I got the Copper one. I love the green, but they didn't have one in stock.
rub light veg oil on the last 6 inches of each leg before inserting for ease of movement. once lined up, simply tap the exposed end with a hammer till it locks in place.
@bestkitchenreviews, thank you for all the work you do. I please need some guidance in purchasing a juicer. Between omega and kuvings, which brand and model will you recommend to someone who juices daily? Thanks in advance for your honest response.
GET OUT THE HAMMER!!!✨🤗✨ weeeeee! People, the correct way to DO the legs is to place the clips NOT into the legs, but rather into the BASE, where the legs will be placed into, making sure the 'buttons' are out the holes. Then you slip the legs over the clips, down into the leg support holes and WIGGLE WIGGLE while pressing the 'buttons' so the legs can slide past them; buttons popping out through the holes when properly aligned. But F.Y.I., even little ol' ME had a bit of an issue pushing the legs in properly. I'm sitting here seeing in my mind, "Honey, let me do that for you." "NO! I GOT THIS! Go fix the kids something to eat!" lol I just LOVE this little thought in my brain. My late wife, Sissy, would NEVER let me help her with - THE PROJECT - and it didn't matter what it was, I was forbidden to assist or help her. Famous last words often were "I GOT THIS!", sometimes, after a bit, followed by a timid, "Um_ Honey?"😘 hee hee
I tried the clips in base but that was difficult. Yes, I almost called my man but really wanted to do it myself. A few more minutes and I would have called him. There are a lot of women like Sissy 😀
I wish I'd seen this first. Those legs were the worst. Other than that, it was no problem. The thing that saved me was some machine oil and a rubber mallet.
This is "THE BEST" Weber Premium grill assembly video. I viewed others to no avail. THANK YOU for making it easy for this lady.
Glad it was helpful!
"Grilling on this Weber is going to be much easier than putting it together." No kidding. Did anybody at their factory try putting those legs in place? Thanks for your review!
You're welcome :)
oh yea I recently bought this, and the leg parts clearly had manufacturing defects where it was very clear it would not fit in. I had to essentially grind some of the metal in order to get those legs in.
It's been about a little over a month for me, I have grilled 10 times, LOVE it. had the best grilled Salmon of my life on it.
@@StephenMoreira we had the same exact situation and had to grind the legs thanks for the encouragement it better be worth it! :) definitely going to try some salmon!!
@@bestkitchenreviews i love your no nonsense style you're straight to the point with great information and helpful tips! You deserve way more views and comments. Grill is assembled now, on to cooking chicken from your next video. Thanks so much!!!
@@StephenMoreira lol i had to use brute force to get the legs in
I'm here in 2023 because MY 22" Weber Kettle Grill didn't come with assembly instructions, just the owners manual. This vodeo was super helpful in getting mine put together, thank you. Only change I would make would be to use a cooking oil to help get the legs in. I ended up using avacado oil, since that is what I cook with the most. Keep sharing!
Glad I could help! Thanks for the tip 😀
Wonderful! there are so many counterintuitive things here and yes, those legs had me crying in despair. But your candid, dryly understated instructions made a huge difference.
Glad it was helpful 🤩
Thank you so much I know this is 2 years after you did this video but it helped me so much this morning.
Great job, very impressive.
Thank you! Cheers!
@bestkitchenreviews I assembled a webber grill yesterday for a senior citizen, and I told her about your video. Took me about 40 minutes with no problems.
Thank you once again.
Bravo, finally someone gets the video correct and easy to follow! Those clips in the legs are a PIA! even for a mechanic. One clip kept sliding down the tube, every time (was bent). Come on Weber, get it together. Also charge $1 more and use stainless screws. I mean the whole assembly is aluminum and very well painted steel and virtually rustless and then they use a cheap non stainless screw for the handle. Anyhow, end of rant. The Weber is still a great value, it can smoke a Pork butt as well as any grill if you get everything layed out right. I like the new heat shield on the handle. My last one lasted 12 years outside, although the aluminum parts that close off the air and ash on the bottom failed after just a few years. Too thin for the heat. Ultimately, the where the legs slide in rusted and my Weber just fell over. Another $5 fix Weber could make.
Thanks for sharing 😀
I just watched this video and put the grill together the way you described because instructions were bad,so i subscribed.Thank you.
Glad it helped 👍😁
Thank you so much for teaching us , couldn’t done it with out your video . Many thanks !
You are welcome!
Excellent video! She tells you all the crucial things that the grill’s instructions and its video leave out.
🤩
Thank you so much. I was about to pay someone to do it then I saw your video. The leg was definitely hard to put through!
Glad it helped!
This video was a life saver. Thank you, thank you, thank you.
Glad it was helpful 😁
Excellent instruction video. It helped more than the Weber app. Thanks.
Just bought one of these saturday but I WILL be using this vid to assemble. Thank you! 👍
😁
@@bestkitchenreviews I see what you meant by those non helpful BS instructions and those legs 🤬 but your video REALLY helped me out today! 😁 Thank you SO much!!! Now, grilling time👌
Perfect guide! Thank you so much. I didn't even use the instructions because of your video. I thankfully had a super easy time with the legs using a quick back and forth motion, but I seemingly had a tougher time with the hub caps. Can't wait to fire this up and try your chicken thigh recipe
Thank you that was easy simple to do instructions now it’s time to grill
Have fun 🤩
I just re bent the spring clips. Took a couple tries to get the right angle and pressure, but made it way easier.
Thank you for your efforts in showing us how to put this together!
My pleasure!
Best instructional video I saw today. Thank you
Glad you liked it 😀
Thanks for the brilliant video. I got lucky getting the legs in pretty much first time. In the U.K my model has split pins to hold the wheels on so I did have a slight panic when I couldn’t find the bag with the hubcaps in. All sorted after a quick look at the instructions. Just need some sunshine to get cooking. Cheers!
Enjoy grilling 🤩
You rock! Thanks for the great videos on this grill!
They used to come with 2 handles. Not anymore, yet cost $100 more. Seems everyone has a hard time getting those legs in. Solid, once they're in place though. Just bought another one today. Hopefully it will last pretty much forever like the ones I currently own... I got the Copper one. I love the green, but they didn't have one in stock.
What a huge help! Thank-you!
You’re welcome 😀
Thank you for posting this!!
You’re welcome 😉
Thank you so much !!! This was super helpful !!!
Wonderful 😁
Thanks that was very helpful!
Glad to hear it 😀
great video thanks so much I subscribed!
👍😁
Most helpful video out there 👍
Glad you think so!
I love your videos and voice
Thank yo so much. You prevented me from being a casualty of Weber hell
😆
Seems like a great way to shatter a glass table hahah
Thanks so much.
Happy 💯K 🥳
Thanks 😀
Jeez Louise not going to win any best design awards now is it? You got my like and I’m a subscriber but N0 spells no on this product honey bunch!
I can’t blame you there...I’ll get grilling soon and maybe that’ll change your mind 😀
Just bought the exact same one. The included instructions were indeed terrible. Did your’s have any paint runs in the bowl?
rub light veg oil on the last 6 inches of each leg before inserting for ease of movement. once lined up, simply tap the exposed end with a hammer till it locks in place.
Thanks for the tip 😀
@bestkitchenreviews, thank you for all the work you do. I please need some guidance in purchasing a juicer. Between omega and kuvings, which brand and model will you recommend to someone who juices daily? Thanks in advance for your honest response.
Hi, glad you like the reviews. Both Omega and Kuvings make good juicers and have long warranties. It's difficult to choose between them :)
@@bestkitchenreviews thank you.
Buy it assembled!
YOU tell us where and I am sure many would do so. I can't find a single store that offers this service. Mine went together with no issues.
GET OUT THE HAMMER!!!✨🤗✨ weeeeee!
People, the correct way to DO the legs is to place the clips NOT into the legs, but rather into the BASE, where the legs will be placed into, making sure the 'buttons' are out the holes. Then you slip the legs over the clips, down into the leg support holes and WIGGLE WIGGLE while pressing the 'buttons' so the legs can slide past them; buttons popping out through the holes when properly aligned. But F.Y.I., even little ol' ME had a bit of an issue pushing the legs in properly.
I'm sitting here seeing in my mind, "Honey, let me do that for you." "NO! I GOT THIS! Go fix the kids something to eat!" lol I just LOVE this little thought in my brain. My late wife, Sissy, would NEVER let me help her with - THE PROJECT - and it didn't matter what it was, I was forbidden to assist or help her. Famous last words often were "I GOT THIS!", sometimes, after a bit, followed by a timid, "Um_ Honey?"😘 hee hee
I tried the clips in base but that was difficult. Yes, I almost called my man but really wanted to do it myself. A few more minutes and I would have called him. There are a lot of women like Sissy 😀
3:05 what's the triangle thing for?
I wish I'd seen this first. Those legs were the worst. Other than that, it was no problem. The thing that saved me was some machine oil and a rubber mallet.
1:30 This part was hell, got at least a few cuts on my hands/fingers trying to assemble it
😃👍🏻👊🏻
😁
webber needs to go back to making marine buoys.
Still in bits sorry I bought it
Could of used a hammer to push it in
It’s a good video but Weber is one of the worst charcoal grill designed systems. Weber should be embarrassed to sell such crap.
Your feet are too cute
😁
If there are no tips or tricks to getting the legs in then why even make the video?