Build: Cinewhoop w/ DJI HD FPV (feat. NURK)
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- NURK is here to teach you how to build the ultimate Cinewhoop!
Pick up your DIY build kit for this setup here!
rotorriot.com/...
Don't want to build it yourself? Purchase a pre-built setup here:
rotorriot.com/...
Link to all our CLI dumps for builds:
drive.google.c...
#FPVFREESTYLE
#DJIFPV
- - - - - - - - -
FPV Freestyle Pilots / Hosts -
Paul Nurkkala [NURK FPV]
/ @nurkfpv
Joshua Bardwell [Knowitall]
/ joshuabardwell
Production Team
Chad Kapper - Executive Producer
Drew Camden - Producer
Christian Kapper - Editor
www.rotorriot.com
I love how Bardwell was telling everyone not to solder perpendicular to the pad right as nurk does it lmao
LMFAO!! How many people stuck around till the end to see Joshua's genuine reaction :D
Great video, the humour between you both really made this video. Of course the knowledge was good too
Every build video I watch from now on has to have JB and Nurk working "together" to build the quad.
That motor drag spin check is really cool, thanks for that tip!
I was like, (short two wires, spin) = mindblown!
FET drag!!
I remember when Pretty Sweet came out and being just absolutely flabbergasted by that intro shot.
Y’all are so awkward together… I love it🤪
5:15 OMG using a contact lens case for lock tite (or whatever else). Brilliant!
Sparing newbies like me of excessive detail but totally full of useful info. Way cool stuff!
I love that Tip And so great to know that if I spin my motor freely the solder joints aren’t bridged nice tip
I know how to build quads in general but there were 2 very useful tips in here anyway:
1) Spin the motors to check for shorts
2) Use the rubberized battery strap for putting on props (I hate putting on new props on all of my quads, having cuts in my fingers regularly 😅)
Definitely gonna use those in future 👍🏻
The Love Hate chemistry between those two is Cinematic Gold...…...great video guys ;)
Love the way Drew smoke tested it. Too funny. 😂🤣
Excellent charisma between you two! Brilliant!
I loved the drone part in the Girl 'Pretty Sweet' video. It was mind blowing at the time,... like the skate parts!
Getting my DJI tuned cinewhoop from you guys tomorrow I can’t wait 🙌🏼
How did you end up liking this drone...?
Awesome tip for the short test!! Thanks
Just amazing, I love the Cine drones it’s why I got into this hobby. Great video and build guys 👍👍👍
Just got my built and tuned one from rotor riot. Can't wait to fly it, but a few hours on the simulator first.
glad you left the doggo's in . I like this mix , very funny polar opposite personalities working together - good work RR fam. happy 2020
"Don't screw with the screws." 😬
Fantastic job, guys! 😃
The way drew walks over and plugs the battery in killed me... such a no fucks given attitude😂😂
You guys are hilarious! Thanks for the build!
Haven't flown in a few years but love build videos.
5:00 its ok joshua i laughed at that bit even tho no1 else did haha
I just started making FPV drone videos and would love to build a Cinewhoop next! The shots you can get are awesome!
This workshop is goals
Bam Bam and Enzo Ferrari build a drone together!! Nice job biting your tongue 👅 Bardwell. Engineer vs pilot. Hilarious 😂
I watched this video from start to finish just perfect 👌
iFlight makes the perfect sized right angle USB adaptor that I use on my Squirt when connecting to the configurator or the speedy-bee Bluetooth.
Gday guys, nice work you two JB the comedy releaf eh!! Great build Nurk it was cool to watch awsome cinewhoop.👍🛸 Gday Drew behind the camera Mr producer sir.👍🛸
SUPER LES GARS merci tout plein
For those following along at home, the build is complete at 27:00, but for the Betaflight steps, in order to plug in the flight controller to the computer (27:30) you have to first remove the cowling, which is close to a full disassembly (!) Doing the Betaflight steps (and BLHelisuite, if you need to reverse motors) before finishing the cowling would be a nice pro-tip. Some tips about how to tighten the build without causing the props to rub the cowling would have been helpful as well.
Great video! It makes me realize I'm a long way from building my own, so I will continue to pay someone to do it for me.😁
Nice tip on the fet drag!
Awesome, thanks for the info with a show! 🤣
Haha that solder inspection 😂
Great Video Best Duo to build a Quad. "Just do it" and "Know it all"!!! At 12:00 put that great TS100 away for that and Show the People how to Solder a big XT60 to an 4in1 ESC. Use a Traditional Iron like a Weller 60W with a big copper tip, everything that Needs to hold on more than 3s is to Long and less Power on the Iron...
Awesome content RR guys keep it coming
A most excellent video/tutorial!
This is perfect timing, I literally ordered my stuff from Rotor Riot to build this same cinewhoop a few days ago!
Zoe made the video great to watch!!!
Alright, so, it seems it does need to be the Yaw Degrees category changed to -90. Another thing that I got wrong, but that wasn't in this video (but that I found the fix for on another Joshua Bardwell video, of course) was that there is a particular upright direction for each of the props. All together, thank you so much for the video! I got my parts in from Rotor Riot today for this thing and its been an adventure putting together my first quad!
Soldering tip: Use flux for rapid heat transfer
Good Chemistry. "Sooo Smooth, So Satisfying."
Can't wait to watch this!
I thought I wanted to get into these whoop drones... and then I saw this video.
That is a great tip at 16:10 !!
That's great tutorial. Thank you.👍
Using the contact case for the loctite is a great idea!...I'm stealing it...lol!!!
Any whance anyone can share the CLI dumps? The link doesnt work anymore?
Bardwell seems unusually tense lol. Great video guys!!
He always is around glorious beards.
@@NURKFPV I figured it was either that or the marathon of vlogging and episode filming you guys did. Maybe a little of both lol
I think I was super tired? It had been a reallllly long day.
Seemed pretty casual to me
I think JB was just tense with a DJI air unit in close proximity to a metallic pointy object, all while Drib was floating around somewhere in the background.
He was all tensed up waiting for the fire to come.
this was AWESOME!
At 13:08 Paul's face is fuckin priceless when Josh is checking his battery cable solder job. Made me laugh and brightened my mood. One reason I shop at rotor riot is because of these guys and their energy.
Redcat needs to give everyone a raise and or some type of perks after the December 2020 RR record sales. Im sure they take care of everyone. Or hopefully they do. Also, vortex is a great personality also.
Amazing build!
11:05 he's literally burning the wire-insulation. I don't ever remember soldering requiring more than a few seconds with simple 40w irons. When we use to race off-road we soldered our batteries seconds before every Stock-class race to ensure we used up every bit of Nicad(a memory battery) we had.
I'm a big lover of ducted fans, from Tiny whoops to big whoops, there's just something about them.
They are Joshua Nurkala, and you’re gonna learn something awesome today
Probably the best cinewhoop ever created. My advice don't print the rotor riot kapper ducts though.
Using those ducts , I have broken arms landing on two occasions . I went back to the original ducts and never broken arms since.
I’ve kinda been waiting for this to come out because I’ve been eyeing a Squirt. Saw it was 40 minutes and I was like eh... usually build videos kind of drag. Nope. This was as entertaining for me as a flying video. Great chemistry. Nicely done guys!
I don't believe Nurk didn't bring his WowStick! Perhaps you didn't want to "lord it over" us peasants. lol
Great vid, thanks for sharing
Great video guys! Is there any reason you didn't enable Bidirectional DSHOT and RPM Filter?
I would like to know this as well.
Love my cinewhoop
kraggy......i learned something new today.
Awesome tips in this video. Although I don’t fully trust my build skills, so I’ve ordered a BNF iFlight megabee.
I wonder if Noctua would ever consider building or sharing their tech for industrial fans for cinewhoop motors
#33:40 always remove the propellers before connecting a battery while on the bench;
rip fingers
These guys are hilarious 😂!
Just out of curiosity, why was the board alignment adjustment on roll axes not yaw? Just some randomly confusing alignment of the sensor?
Hey guys, I'm new to FPV and plan on purchasing a ready set from you. I just have a couple of questions: will there be a mount for a GoPro already to attach? what else a newbie should invest in for the first time to maintain one? I don't have any working space at the moment and thats why i'm not building one from scratch just yet hahah
Yeahh 🙌🏻🙌🏻
Awesome!
How come when you entered the FC alignment you change the roll alignment and not the yaw @39:00? You spun the FC on its yaw axis 90degrees, you didn't roll it.....
You guys should check out the blue shark fpv drone, would love to hear you guys thoughts
great video. are the ducts TPU ? or PLA+ ? they seems to be very flexible but I thought they were also here to protect and if it's TPU it will bend immediately after a shock
RideWithOKP TPU. They’re on thingiverse too if you wanna print them yourself
@@swissfreek thanks! why don't use PLA+ to print them? That would be cool and PLA is also very flexible ?
@@E-sk8Fr PLA would shatter
RideWithOKP PLA isn’t very flexible at all, relatively speaking. Like Josh said, it would shatter on the first crash (into your props, eek 😬). I would never suggest printing this rigid, but when it comes to rigid filaments, if you want something with a little flex that won’t shatter, I would look at PETG, or maybe nylon (but nylon is very finicky to print). Neither would work in this application because you really need the flex.
@@swissfreek thanks a lot. I'm going for TPU. Actually trying to print it with 1.5mm thickness. My TPU is 95A
Can you do a build without the dji stuff? Like a budget version
Where do i can find that Vertical Position mount for DJI air unit ? Impressive
Make nurk a team pilot and more cricket! But really just RR needs to be Switzerland of FPV BRING BACK THE CLASSICS!
You guys crack me up.
Question, if you aim the go pro down, to get real estate like video from up high, do you have to crop the image? Getting my 107, getting this drone, getting money.
I want to buy this cinewhoop where can I get FROM
I'm from UAE/DUBAI
U GUYS DID A GREAT JOB
What battery would u recommend for the DJI FPV Googles and what battery for Cine whoop?
Do some build guides on the Geyser!
Squirt V2’s are hard to come by 🤦♂️
Do you deliver in the Philippines? I am planning to buy this one on your site.
hi.. thanks for the video. where is the link of parts?
Is the dji google and controller needed for dji air unit? I just want to buy the air unit and camera. The googles and controller are a little expensive
Do you have to change something in Betaflight, when mounting the fc not right in the middle?
i cant use 6s for it or can i?
I want to build my frist drone.. and a have a prebuild nazgul 6s.. and a cinewhoop makes the most sense.. but id like to use 6s because.. i have 6s lipos.. but i cant find any turtoriel for a 6s cinewhoop.. what on your build i have to change for 6s? Motors, flight cobtroller? power board thing?
Where can I find the STL for the camera mount that looks like NURK's chin?
Is it possible to use a spectrum transmitter for this quad ?
Great video guys (as always). Struggling to find the config dump. Is it in the description?
Just added link to description! thanks
drive.google.com/open?id=1SmTQ4r6--ZVbyMuIQLf8wZXyR22bN1VA
- Drew
@@RotorRiot You guys are the best. Bought a Squirt from you two weeks ago and two more this week. What you guys are doing for this hobby, sport and profession is so far beyond the competition. Thank you.
Help.. I have everything to build it!!! Buttttt I accidentally got the xt30 batteries, they have 16awg wire. Is that going to be a problem?
Someday when I get rich I will buy a DJI controller and goggles!
When will the kit be in stock? I've been waiting for weeks
Hi, I just ordered the ready to fly cinewhoop. What battery i have to buy to fly with it ?
a 4S battery between 850mah and 1300mah in size is ideal. But VORT3X also runs 1550mah batteries with no issue, just a bit heavier
-Drew
How much extra thrust do the ducts provide though? the squirt v2 frame weighs 125g all up, I can build a lightweight whoop with guards instead of ducts at 68 grams.
My squirt is weighing in at 540g with a gopro hero8 and an 850mah 4s batt which seems super heavy given the weights i've seen online. Even Paul wrote up about his build which was close to 100g lighter than what I am weighing in at. My ducts are 62g all together. Not really sure why mine is so heavy? It flies extremely heavy and kills a 1550mah battery in about 2 minutes. Any ideas on how to get the weight down?
I like that desktop magnetic tool holder. I tried to find one, is this a custom made thing or do you have a link or product name? Thanks!
what about the Shendrones Geyser? What are the main differences compared to the Squirt?
I'm getting terrible rubbing between the propeller and the duct. The ducts I received from Rotor Riot were not round. Is this normal? Rubbing is so bad that I can't spin the propellers and let it wear in. In one duct the motor can't even spin.