DD15 Engine Locked Up/ DD15 engine Seized/ dd15 engine low oil pressure/dd15 engine knocking noise/
ฝัง
- เผยแพร่เมื่อ 30 ก.ค. 2024
- New Shop Info: goo.gl/maps/HzwG98iioszjQWRP6
TAT Express Inc.
972-225-3017
4140 Langdon Rd.
Dallas TX 75241
DD15 Engine Locked Up/ DD15 engine Seized/ dd15 engine low oil pressure/dd15 engine knocking noise/
In this video, I will be explaining what a lower-end bearing failure. Finding the root cause of the failure is very important. It is necessary before deciding responsibility for the failure.
semi truck,dd15 detroit diesel,dd15 low oil pressure,dd15 rod and main bearings,dd15 engine locked up,dd15 engine seized,dd15 engine low oil pressure,dd15 detroit diesel problems,dd15 detroit diesel oil change,dd15 low oil pressure at idle,dd15 low oil pressure fault code,dd15 detroit diesel engine,dd15 engine knocking noise,dd15 knocking noise,cylinder misfire,dd15 lower end bearing,dd15 lower end bearing kit,dd15 oil change,dd15 low oil pressure when hot
Coming soon 4140 Langdon Rd. Dallas TX 75241
New Shop Info: goo.gl/maps/HzwG98iioszjQWRP6
TAT Express Inc.
972-225-3017
4140 Langdon Rd.
Dallas TX 75241
Mom-Fri 8:00-6:00pm
Call 972-225-3017 to schedule an appointment
Email info@tatexpressinc.com
Check out some of our other videos
DD15 DD16 DD13 Low Power /DD15 low compression/ DD15 no power up hills/ DD15 Detroit diesel engine
• DD15 DD16 DD13 Low Pow...
How to Replace A Wheel Seal on Semi/ Wheel Seal Leak/ Wheel Seal Installation/100kMiles Inspections
• How to Replace A Wheel...
Most Common Issues With The DD15
• Most Common Issues Wit... - บันเทิง
I came here for an overhead adjustment, PM service, & more ...it's definitely a credible & reputable shop. They make you feel like you can trust them with your equipment...
Deddie, we greatly appreciate your support and comment. Thank you 👊💪
Great vid bud and i must say i just got out of yalls shop today and it was A+ service! Im not taking my rig anywhere else!
Good to hear. Thank you John. 💪👊🔧
U R VERY EDUCATED .WE NEED MORE PEOPLE LIKE YOU 👍
BE SAFE..
We are happy to share the knowledge. Thanks for watching
Your videos are very helpful and insightful! I appreciate your videos as a learning diesel mechanic they give me hope to one day be as knowledgeable as yo are. 🙏🏽
You can do it! Glad to help 💪
Great video again. Plan on coming to your shop soon. Thanks.
Good freaking stuff! I’d definitely work with y’all if I lived nearby.
My buddy has a '13 Cascadia with a DD15 & that engine blew up on him THREE times! The original engine blew cylinder 5, the used engine blew cylinder 5 & he had it FULLY rebuilt with everything brand new. It pushed oil out between the front of the head/block area, started knocking & spun a bearing at 60K miles. This engine is pure JUNK! I'll take a Cummins ISX before I ever own one of these.
Debris- the S is silent. Best videos on TH-cam.
Love your video's bro. We've been finding oil suction manifolds on our trucks with loose plastic piece or little door falling off the side resulting in low oil pressure.one actually seized.😒
HI ADAM I REALLY LOVE HOW YOU DEMONSTRATE YOUR SKILLES IOF UNBEATBLE
very in depth explanation great job
great videos bro,we have same issues in kenya with mercedes engines with om470 and 470 engines
Thanks for the info
I've got a dd15 ,and when I get my oil changed I always put a gallon of Lucas oil stabilizer in to keep the seals soft.
Great idea👍🏼
Hello, I just finished doing a inflame overhaul I also have a dd15 2013 cascadia, my issue is that when I took it for a test drive I went thru 2nd 3rd 4th gear but when I got to 5 gear the lost all power even with my food on pedal straight down to the floor and now is doing it on 4th and 5th gear, can you give me any printer on what it might be? Greatly appreciate!
That is all great information, all kidding about the breeze aside! Thanks for the great vid, you got a sub from me!
Professionalism at its finest
All this new oil filter technology plastic top oil filter housings and centers no substitute for a good old-fashioned spin-on metal oil filter Volvo has the best oil filtration system on a diesel truck two full flow oil filters and one bypass three oil filters combined that's a good setup 💯
David, thanks for watching. 👊
There must have been a lot of wind in Dallas that day cause he kept talking about "da breeze" and how it somehow had to do with low oil pressure!
Hello. I have DD15 Freight liner. I just did a suction tube, oil pump and o-ring. The truck was test ride and it only went one mile. At first it was running good then ruff. Cut off within the one mile and it won’t start up it sounds like it want to. I did a computer test no codes coming back. The oil light and red engine light comes on. What do u think is wrong. Miles 800000
Merry Christmas!!!
Does Freightliner Cascadia 2017 has a safety shutoff if engine does not get oil ? my engine locked due to lack of oil in the housing but no Warning lights came on and consequently truck did not shut itself off - appreciate your help with this question
video này hay lắm anh ơi
Great information on your videos thank you I really appreciate you making them do you have a shop in Houston you would recommend for DD 15 repairs?
watching these videos makes me want to become a mechanic
Thanks for sharing very informative , how many miles was on it
em chúc anh thành công trong công việc, 2021 no covid
Your vidios are top
Thanks
Good Stuff Adam
How much is to replace seal on manifull and oil pump. Mine has 400k DD15 2019
Thanks a million you’re dope
How many miles before those O rings should be checked or changed?
Favorite TH-camr repairing my favorite trucks
We appreciate the support
Question.? My semi is occasionly smelling like rotten eggs! What could cause this??? I'm very clean!!
Another great video
Glad you enjoyed it
Was the motor fixable or did it have to be replaced with another motor ?
Tudo bem
happy new year 2021 no covid
If a truck come in with the rod through the block why go through all the extra diagnoses?🤔
Good morning, my question is . I have one of those wonderful DD15 and the other day the engine lock . Now my question is " should I rebuild the engine or get a fresh brand new engine Installed”.
Ricardo, rebuilding is only recommend if engine is still rotating. 🔧💪🇺🇸
I'm wondering 🤔
Engine failed after oil pan gasket repair,but you found a broken bypass valve.so did they break the bypass valve when they replaced the oil pan gasket?help me understand the connection.😕
Saul good question. Improper workmanship allowed excess dirt to enter oil system. Customer also stated that the PM was done as well. Usually oil is changed after an oil pan replacement, the broken standpipe should have been noticed during filter change. Thanks for watching. Good question
Most likely put the sump back up then removed the oil filter which would let about 1 litre of dirty oil in the sump then they probably cranked it with no oil pressure for a long time due to fuel filter replacement after 100 kilometres down the road the crank locks up
Do you guys sell remanufactured DD15?
Nice nice good video 👌🏻👌🏻👌🏻👌🏻
Thank you so much 😀
i had a co-worker who thought the "low oil pressure stop engine" light was just a sensor and tried to pull it into the shop. locked it up in the parking lot i pulled the starter off and confirmed it was locked up. customer never fixed it with us though
How much is this type of investigation? If discovered by, that its not my fault, what can i do?
How was this caused by POOR WORKMANSHIP ? Do you change the BYPASS VALVE or STAND PIPE while doing an oil change ? I'm ignorant when it comes to these engines, T.Y.
I do have 2012 Freight liner Cascadia DD15
I recently made lots of service on it because one of the Pistons was not functioning good... The Mechanic open each and every pice of the Engine top and bottom... he change all the Ring and baring of all pistons and be clean the piston he put everything together.. but I still scared to take the Truck on the Road.. I felt a little change on the Sound of the Engine plus the Oil pressure is acting wired... if I do less than 70 mph the oil pressure gauge stays on 50 if I do 75 mph and above the oil pressure gauge is going up to 60 ....
can you please help with some information why it’s doing that??
And what do I need to do to prevent the Engine not to be blocked....????
My DD15 stays on 50. That's were it should be
How much for a rebuild on a DD 15 2015 freightliner
First step inspect oil pickup tubes.
How are you I have C13 two turbo is a good engine
What is mains?
How often should these trucks be greased? Can You recommend a mileage interval please?
PMs every 12-15k miles w/ chassis greasing
@@TATEXPRESSINC thanks I’ll follow your helpful suggestion
ARE THERE ANY RECALLS FOR THESE FAILURES?????
A lot of issues come from the oil pump seizing up due to lack of oil changes. Engine oil breaks down and the additives that are required losses it’s efficiently over time.
Doing a 30k oil change interval is NOT good as the oil will be of no use.
Use the proper engine that is used by the manufacturer and go to a reputable service center that carries good products.
Agreed. Also, some manufacturers overestimate how long their oil will last. Back in the 2000s, Toyota had 3.0L V6 engines dying of sludge. They called for 5000 mile conventional oil changes, but those engines sludged up. Many people would insist on 3000 mile oil changes and were less likely to have the problem.
What is a low pressure reading for dd15 while idle ?
Christian, the engine will shut down if oil pressure is too low. DD15 oil pressure at idle is 14 psi. Thanks for watching. Be sure to subscribe. 💪🏼🚚👍🏼
YEP JUST HAD MY RINGS REPLACED. Drp pan thats were they are. No other way.
2👍up bro
This truck got towed in low oil pressure codes and very low oil pressure codes.. hmm it’s got oil, sensor looks good, motor not turning over.. yea it’s locked up. Oh what’s that you say it had a new oil pan put on 10 days ago hmmm
2:23 oil pump and the rest of my
What is low pressure during idle? I have a cascadia that idles at around 12 psi and around 6 rpms. I canceled the idle management cause the rpms were way too high. Now I don't worry about my trk shutting down during the night.
When idling your DD15 engine should run at about 700 RPMs or better. When you are parked and your cruise control is turned off bump the engine up using the ACL/RES button on the steering wheel. That is the lowest your truck should idle during a break. Your oil pressure gauge should be no lower than about 21 PSI or you may have an oil flow problem. I don't like the oil pressure gauge on Cascadia model trucks as they do not indicate what low oil pressure is.
You are hiro.
Thats why I bought a 2017 cascadia with no engine and had installed a 2000 series 60
Can I put a Detroit 60 series in a 2015 cascadia freightliner automatic? I have a DD13 engine at 800,000 miles
@@troypitchford5528 yes definitely
What can cause high oil psi I run 60 psi around 1500 rpm and 50 psi at 1000!rpm
The oil pressure will rise when the rpm is increased.
A decade dam 3 decades for me
You should be an actor you can memorize your lines good
Rizzo, thanks for watching. I want to get as much info to you as possible.
Just trying to help the S is silent in debris
Turbo went out, sucking all the oil out, engine locked up....
*****🇺🇸🎼🎸🎤OMG that’s a lot of assemblies, Tk 😇 4Ur Samaritan 2us Adam 🤗4all T important info🙏🏽🎄🎁🥁🎹🎶🇺🇸*****
MMT. 💪🔧🇺🇸Thanks for watching
ARE THERE ANY RECALLS FOR THESE FAILURES?????