*SAFETY NOTE:* If you guys decided to make this... Make sure to check out the Can's Rating for the PSI. Match that when you are refilling it or it will go BOOM! LOL
Before attempting to apply a flame on the cylinder it should be thoroughly washed with detergent to ensure no residue of the inflammable material is within or else it could explode ?
A friend of mine who only takes his advice built one of these and did not take my input on watching how much air pressure to put in the can. He filled the can up to the point the can exploded. He was deaf in one ear for a month damaging his eardrum . He has chronic TINNITUS NOW . Some people never learn and often learn after they get killed doing ignorant things! I WARNED HIM ABOUT FILLING THE CAN UP PAST THE CANS LIMIT .
Excellent idea! Must be very care during pressurizing and handling. Actually aerosol cans are designed as use and throw. An explosion can lead to serious injury and property damage. Remember, even the brand new areosol cans are exploding if kept under direct sunlight or in hot area.
τί χίλια μπράβο ρε.. ξές το ια γίνει όταν σκάσει αυ΄τή η παπαραία?? και άντε εσύ είσαι μαλάκας. φαντάσου να πάει να κάνει την "κατασκευή" ο γιός σου και να χάσει στο τέλος την όρασή του. πάλι θα πείς μπράβο?
Because most compressors are heavy, bulky, have to be plugged in, and not very portable. Being able to pick up a small can to blow dust off of a computer circuit board makes much more sense than dragging a 30 lb compressor up to where your computer is! Also the volume of air released is greater than what a small compressor like the one shown can put out at once.
That Schrader valve has a high chance of failing at the solder joint. Also everywhere the paint was ground has been thinned out. This project will cause some unlucky individual to blow off a finger. Good luck.
It's dangerous.. this kind of soldring fix good only brass with brass or copper only not with steel beter ready made vacuum/blower fasality available locally for cheeper
I have done this ! It works ! Try to refill with air little every time to see how it works . Maybe you will not exceed 6,5 bar
*SAFETY NOTE:* If you guys decided to make this... Make sure to check out the Can's Rating for the PSI. Match that when you are refilling it or it will go BOOM! LOL
Before attempting to apply a flame on the cylinder it should be thoroughly washed with detergent to ensure no residue of the inflammable material is within or else it could explode ?
I like very good ❤️ VDO
I had ever never think about this cans like the reseivers! Awesome! And respect for soldering!
Nunca he visto soldar aluminio con estaño
A friend of mine who only takes his advice built one of these and did not take my input on watching how much air pressure to put in the can. He filled the can up to the point the can exploded. He was deaf in one ear for a month damaging his eardrum . He has chronic TINNITUS NOW . Some people never learn and often learn after they get killed doing ignorant things! I WARNED HIM ABOUT FILLING THE CAN UP PAST THE CANS LIMIT .
बहुत अच्छा प्रोडक्ट है लगा मैं अपनी बनाने की कोशिश करूंगा
Excellent idea! Must be very care during pressurizing and handling. Actually aerosol cans are designed as use and throw. An explosion can lead to serious injury and property damage. Remember, even the brand new areosol cans are exploding if kept under direct sunlight or in hot area.
Yahi jugaad mane 1999 me bnayaa thaa. Bohut khoob. √√√√√√√√√
I Fill them from the top. No need to drill them to install a tire stem
Hi to who ever hit the like button
6 bar de presión para ese bote me parece demasiado , creo que es temerario , y a alguien le explotará en la cara .
Saludos desde España
If u use soliding iron it will be more eassy and clear
Olímpica la mejor soy un venezolano que vivió en cali hoy día me encuentro en ecuador y la sigo escuchando éxito para ustedes amigos
instaBlaster...
Your video is very good, please share it for a long time, thank you very much
AWESOME VIDEO 💟
ok.verygood idea.
Một loại đồ chơi quá NGUY HIỂM !.
Nice Idea, One Improvement is required!, for liquid refilling make separate Nozzle.
Надо подумать над изменением конструкции. Интересная идея. Иногда нужная Я подумаю
Muito bom seus vídeos
Pero si tengo un compresor para llenar el envase de que me sirve ?
Τέλειο το σύστημα αυτό με το μπουκάλι και την βαλβίδα 1.000 μπράβο πάντως.
τί χίλια μπράβο ρε.. ξές το ια γίνει όταν σκάσει αυ΄τή η παπαραία?? και άντε εσύ είσαι μαλάκας. φαντάσου να πάει να κάνει την "κατασκευή" ο γιός σου και να χάσει στο τέλος την όρασή του.
πάλι θα πείς μπράβο?
good idea
Mantap mr trima kasih ,ciptakan model2 yg keren nsimpel ..sukses
Mantaap sekali itulah banget banget
How to make your room 2X messy than it was last time
Amazing AMERICAN TECHs
Cheap but clever idea....👍
if u have an compressor why would u use that
Because most compressors are heavy, bulky, have to be plugged in, and not very portable. Being able to pick up a small can to blow dust off of a computer circuit board makes much more sense than dragging a 30 lb compressor up to where your computer is! Also the volume of air released is greater than what a small compressor like the one shown can put out at once.
@@eagleviewhd yes but if the can explodes you dont have an hand to work on your computer
Kreen.
Dan sangat bermanpaat sekali
Super ...👍
BOOM BOOM BOOM~~
Você poderia soudar primeiro e depois furava através da válvula
"DIY air can"
*Pulls a fucking air compressor
I did this years ago, because I was tired of buying air cans to blow out my laptop
I was thinking about it before somedaus
Gostei do Compressor
Popa angin di beli dimana infondong
Nice
Lo puedes usar para pintar 👍
Very nice
Nice video
Era mas facil ponerle un soplador ala.manguera y listo
🌟very useful video🌟
Gostei muito
Tq.
exelent travail bravo
Good idea!!
like nhé bạn
Si ocupas compresor, cuál es el chiste, mejor usar directo el compresor
गजब
Wandar full
That Schrader valve has a high chance of failing at the solder joint. Also everywhere the paint was ground has been thinned out. This project will cause some unlucky individual to blow off a finger. Good luck.
فكرة جيدة
It's dangerous.. this kind of soldring fix good only brass with brass or copper only not with steel
beter ready made vacuum/blower fasality available locally for cheeper
When soldier will be released it will shoot like bullet
oMg itS fReE eNeRGy
This is a very irresponsible and negligent video this could lead many who try this at home to cause disaster n damage to self n evironment
Where did you get that air compressor?
They should just use that
Deve ser bom pra soprar as folhas do jardim... imagine se o sujeito tem um terreno com uns 50 mil metros pra limpar... 😂😂😂
Kkkkkkkkkkk!!!! Ele ainda nao acertou as medidas do ar e do liquido kkkkk.
aim the gas lower the soldering area
good luck man🙈... protect your eyes🤕
Literally the most irritating background music on the internet.
I second that, must be the fly spray that the poster inhaled that made them think it was a good choice
Eu ainda perco meu tempo vendo isso... 😜
ABESTADO!!!
Yeah, lets use a can with poison in it.
berapa PSI mr...??
min 0:42 the mosquito y back!!!
Love you bro from nepal😘
please make fish killing current
Hi. what pressure is inside ?
गजब वेला है तू।
Acest tip de modificare a fost făcut de mine la vârsta de 18 ani
Mizael eletrônica real paulista pe lingadinho sempre no canal valeu irmão tamos juntos valeu
way to much commercials on youtube in 5 minutes of watching, they pop up 20 commercials, this is not normal, now
@uwu グーチ owo i know, that's why i sed youtube
Wait for it to blow. This is dangerous.
Plus qu'à mettre une mixture d'odeur noseabond à l'intérieur et au boulot 💨
Is its real video channel like as Mr.Dharoniya TH-cam channel
pressure blowout
No thanks I'll keep using my air tank
Kereeen..
Good
Show de bola
Tu por aqui.
Use tubeless tayar waal.
o engraçado que ele ja tem um compressor portátil .quem não tem oque fazer caga longe .
Cuanto libras de presion lleba en español nose ingles xfa.
80lb
OMG nice
PSI ?
Most of these Cans would support up to 50 PSI
Por dónde le hecho la pintura
ano poh yan automatic kusang tumitigil pag puno n hangon
Very dangerous.
Please don't do this
Nice idea
6,5 атмосфер в жестянку ? Смело но глупо,
Useless project
my advice: get a vice.. 2:58 OH! he heard me! 3:41
Только чтоб этот сосок не прилетел в башку😄😄
Или между ног как вариант
Такую "байду",я делал ещё в начале 80, тогда в "моделист - конструктор" было много всего полезного...
It’s very dangerous to puncture a spry bottle
I made it two months ago
What is the background music name
ALu soldering?
th-cam.com/video/_mYkM9lHMho/w-d-xo.html
@@davidbolha not the best, mother of invention
Funny.!! Why, because you have the notion to do it!? :)
please dont put sharp objects near it while it has 80psi
Mejor sellar la válvula con epoxi metal.
I try that bottle is blast😨😨😨😨😨😨😨😨
Une bouteille en plastique c mieux , on aurait pas besoin de seringue pour la remplir.