How to make a simple Stirling engine
ฝัง
- เผยแพร่เมื่อ 1 พ.ย. 2022
- How to make a simple Stirling engine,，In the video, I made a model Stella engine from recyclable waste, using the following materials:; Can, a water pipe, a rubber glove, some steel wool, bicycle spokes, and some wire connection terminals. There is also a broken hard disk. If you don't have a hard disk, you can also use some other round things to replace the flywheel to make the engine run more smoothly. You can also make one at home
My channel has just started, there will be more interesting DIY productions in the follow-up
There are a lot of interesting little productions in the channel!
Like my video and share it with your friends, also SUBSCRIBE for more!
我的頻道剛剛開始，後續會有更多有趣的DIY作品頻道裏有很多有趣的小作品！ 喜歡我的視頻請訂閱，也請與您的朋友分享，十分感謝， - แนวปฏิบัติและการใช้ชีวิต
muy buen video, muy útil y divertido muchas gracias 🫶🏿
I like it
My thoughts. It's great setup. The side open hole is not required as it is a closed process. It is an isochoric process not an isobaric one. The small side reservoir can be used to house ice water or a water bath as a heat sink. This should improve engine. As efficiency is purely from the temperature difference of the heat source and the side heating reservoir
very good job, rather interesting piston connection
谢谢
Otima idèia este motor.
That is good
Super, 👍 on peut avoir les mesures et la pâte pour coller 👍
Very nice thank you for sharing
谢谢
Qu'es qu'il utilise pour relier les tiges ensemble ??
Buen trabajo pero me entra la duda saber, que son las pequeñas piezas rectangulares de cobre o bronce, como se llaman?
Ce sont les pièces de serrage des fils électriques qui se trouvent dans les dominos
Those are called wire connection connectors
I am going to try too
Okay, come on, it's amazing to see these pieces of shit in action.
Buen video pero la lista de materiales estaria mejor
Estas son cosas comunes que puedes hacer después de ver el video.
@@MrYang-ju8lc podría decirme los materiales, gracias
Well done, I'll try it.
ok wish you success
Im Video habe ich ein Modell Stella-Motor aus recycelbarem Abfall gemacht, mit den folgenden Materialien:; Dose, Wasserrohr, Gummihandschuh, Stahlwolle, Fahrradspeichen und Kabelanschlüsse. Es gibt auch eine kaputte Festplatte. Wenn Sie keine Festplatte haben, können Sie auch einige andere runde Dinge verwenden, um das Schwungrad zu ersetzen, damit der Motor reibungsloser läuft. Sie können auch eins zu Hause machen
Faltou as medidas que você usou
Ok, sim, não existem dimensões específicas para isso e não precisa ser exato, desde que funcione
Yang di dalam itu busa?
Muito bom meu amigo! Eu gosto dos motores stirlings!!!!! Grande abraço, acabei de me inscrever!! Congratulações Brasil!!!!!😊😊😊😊😊
谢谢我的朋友
@@MrYang-ju8lc ⚠️ 古兰经 ❤
❤ 真主在古兰经中说道 ：
❤ { 众人啊！你们的主，创造了你们，和你们以前的人，你们当崇拜他，以便你们敬畏。(2﹕21)
⚠️ 他以大地为你们的席，以天空为你们的幕，并且从云中降下雨水，而借雨水生许多果实，做你们的给养，所以你们不要明知故犯地给真主树立匹敌。(2﹕22)
❤ 如果你们怀疑我所降示给我的仆人的经典，那末，你们试拟作一章，并舍真主而祈祷你们的见证，如果你们是诚实的。(2﹕23)
⚠️ 如果你们不能作──你们绝不能作──那末，你们当防备火狱，那是用人和石做燃料的，已为不信道的人们预备好了。(2﹕24)
❤ 你当向信道而行善的人报喜；他们将享有许多下临诸河的乐园，每当他们得以园里的一种水果为给养的时候，他们都说：这是我们以前所受赐的。其实，他们所受赐的是类似的。他们在乐园里将享有纯洁的配偶，他们将永居其中。(2﹕25)}
what are those materials?
Abi piston yapımında normal blaşık teli kulansak olmamı
Hayır, sıradan çelik tel bilyeler sızdırmazlık sağlayamaz, çok serttirler ve boşluklar çok büyüktür.
Great video! Would you be able to provide a materials list?
Sorry, I can't remember the specific materials, but the materials used are all easily available, such as cans, car spokes, copper binding posts, some steel wool, and the rest is a little hands-on ability. Now let's do it. Good luck you succeed
isko Bana Ke Bhi Kitna Din Lagiya hai to hamare Naam Mein Phool Tuli 😊😅😮😢🎉😂❤
Bagus, bagus, namamu akan segera mekar
МАК - век не рожал и голоду не было.
谢谢
可以用氣球嗎
你说那个胶皮膜吗？那个就是气球😀
Yo necesito uno para el motor de un carro casero
usa uno horizontal, pero no de latas de soda
Ça marchera pas
Made in China.
Where can I buy materials to make piston?
En el sitio web de compras, esto se llama terciopelo de acero para la limpieza.
While it followed the Stirling form, it's technically a steam engine. Not a stirling. If it operated without water, then it's a Stirling.
Adding water is just for better heat dissipation. It doesn't rely on steam to work😜
Another example of gamma type stirling engine:
th-cam.com/video/RTmeMs5pKZo/w-d-xo.html
good job congratulations
@@MrYang-ju8lc First of all, I'm glad I was able to get your appreciation. I designed a project by taking your project as an example and I was successful, thank you again and I wish you a good work.
Bal ki tarah kya lapette ho
You can just roll it up like a ball.
ну - і ????
Abi piston yapımında normal blaşık teli kullansak olmamı