Eficiente y practico!!!♡ Apenas lo vi y lo ame!!! Empezare a buscar quien lo haga para mi o tal vez hasta podria intentarlo.:)).. agradezco por compartir esta buena idea!! en mi busqueda, este hasta ahora ha sido el mejor tutorial y sencillo para entender, gracias gracias!!!
loved it. what would also help is giving the names of each material part (hinges, type of wood pieces called, what type/size screws) and what type of tools used. for a newbie handyman would help a lot to know what to ask for @ home depot for instance when buying parts :)
I randomly chose these ones, it went out quite nice Three "legs": 140, 140, ~130 sm Moving part: 60 sm Other parts: 20 (upper one), 70 (vertical one), 40 sm
Well I can tell you I am a carpenter, it’s because he ofcourse, leaves it up to the builder to decide their own height measurements etc. Relax, don’t overthink it, trust me! ;)
its a great project but, can you help me with the measurements? in the video they are not seen completely, the video is cut off and it does not allow all the measurements to be seen well. Hope and heard from you hope and read from you soon
Simple and well done, unfortunately, in my country, building one is as expensive as buying a premade : it's like a 5bucks difference but when you count in the time of work it basically ends up costing the same
Well, if it doesn't stay by friction, you can insert a screw on the back of the slider so you can lock it in place. A less invasive way may be to insert something thin between the sliding parts. Hope it helps
First impression a minute into the video: This guy works like I do ... precariously holding a board in one hand and an electric saw in the other ... In the kitchen (or any other family-type room) .... As long as you're on the floor. THAT is the main thing. Five bucks says his wife has given him a corner in her exercise room where he’s allowed to keep tools. 90% of the job is putting shelves up. (edit) Hey! It ended up being a pretty good video. Final thoughts? Yes. WTF is with the half-raped child’s doll on the shelf upper left frame at around 4:00 ?!
Great project!! 1000x cheaper to build than to buy and it looks like it was made from a manufacture shop! Two large thumbs up!! But what I'd like to know is... How do you keep that "slider bar" from falling down if you have something sitting on it? Perhaps, by drilling 1/4" holes through the 1x1 upright it slides up and down on, you could insert a small piece of dowel or a peg to keep the bar from falling or sliding down? I dunno!
![[Model B] How to assemble an 5ft easel | Painting Stand | Assemble with me | Grandink ®](http://i.ytimg.com/vi/DuC31_kARCI/mqdefault.jpg)
![[Model B] How to assemble an 5ft easel | Painting Stand | Assemble with me | Grandink ®](/img/tr.png)
ایکدم آسان طریقہ...
Perfect easy idea... Thanks
What a brilliant, simple and efficient design. Simpler than the one I just bought for £26 from Amazon and assembled myself.
Best most simple version out there. Thank you
instablaster...
Eficiente y practico!!!♡ Apenas lo vi y lo ame!!! Empezare a buscar quien lo haga para mi o tal vez hasta podria intentarlo.:)).. agradezco por compartir esta buena idea!! en mi busqueda, este hasta ahora ha sido el mejor tutorial y sencillo para entender, gracias gracias!!!
Just what I was looking for, simple and practical. thanks so much.
loved it. what would also help is giving the names of each material part (hinges, type of wood pieces called, what type/size screws) and what type of tools used.
for a newbie handyman would help a lot to know what to ask for @ home depot for instance when buying parts :)
your video has been very very helpful thank you
Love your creative thinking of making it slide up and down for height adjustments, not stupid at all. Great job!
Parabéns!!! Simples e objetivo.
Congratulaciones !!!excelente trabajo !!!
Excellent work. I love this easel.
Thanks for video👏👏👏
Thank you 😊😊😊😊...I completed today❤❤
So nice and easy.... Thanks for sharing!!
Simple method. Just made one today. 👍👍
Glad i could help
Perfect project for the coronavirus lockdown
so much cheaper than store bought!
Thank you for Sharing 🤗
Happy i could help. Stay safe!
EXELENTE TRABAJO Y MUY FACIL HACERLO....GRACIAS GENIO...
Mh top tema💪👆🔥
👍👏👏👏amazing, I like it😍
Enjoyed your video. Excellent idea by placing a slider to hold the canvas.
Muchas Gracias amigo por aportarnos tus conocimientos.
tendras las medias bro
@@samuelg.rosales202 por favor, las medidas!!
Thanks! This will be a perfect weekend- project for me and my son, we are planning to do a Bob Ross paint-a-long 😁
That's very nice. Happy i could help
@@CraftsAndProjects its a great project jut, can you help me with the measurements?
hope and read from you soon
By far my favorite and easiest 👍
Help full vdo thank you so much
simply brilliant!!
absolutely brilliant! how much did it cost you then and what do you think it would today, 2022?
Thank you! At that time it cost about 3 dolars. Nowit would be around 5 or 6, due to the increasing price of wood
Beautiful work 👌
MIne turn out really nice! Thank you!
Happy to hear that!
I want @@CraftsAndProjects
ME ENCANTÓ!!!!!
Parabéns.. e 👍like 👍like
Muchas gracias ,, me has dado una buena idea.
Muy bien amigo, le haré uno a mi beba... Gracias por el apoyo...
Wow this is great, it helps me, i will make for my son
Hi new friend here
I will make it..thanks.
Excelente, todo lo haces fácil y sencillo.
Awesome I'm sure going to make it now
Thank u, very detailed and easy to make watching your video. 😉
Happy to help!
Thank you this helped a lot!!!
Thank you!!! The best.
Super 👌❤️❤️
Muito bom. Valeu a inspiração tchê. Miro de Souza da cidade de Portão-Rio Grande do Sul- Brasil
Carai, tchê! Morei em Portão no bairro São Luís por uns 5 anos com minha gaúcha! Trabalhei na Hoff do areião em S.S do Caí.
@@josuecal Que maravilha. Portão está aberto.
Parabéns ótimo vidio
Good job
It would be really helpful if you put in description box how long exactly is each part.
I randomly chose these ones, it went out quite nice
Three "legs": 140, 140, ~130 sm
Moving part: 60 sm
Other parts: 20 (upper one), 70 (vertical one), 40 sm
it will help me.thanks.
Well I can tell you I am a carpenter, it’s because he ofcourse, leaves it up to the builder to decide their own height measurements etc. Relax, don’t overthink it, trust me! ;)
its a great project but, can you help me with the measurements?
in the video they are not seen completely, the video is cut off and it does not allow all the measurements to be seen well.
Hope and heard from you
hope and read from you soon
Thanks so much easy and to the point
Simple and well done, unfortunately, in my country, building one is as expensive as buying a premade : it's like a 5bucks difference but when you count in the time of work it basically ends up costing the same
Very nice, thankyou for sharing this vedeo
Very nice and great job
Hfbcbbgnsgrbhf .DF dbegdbhfvdgbdgdvhdbdhdngdhdbvrvdo
What do you call that metal ,the one you pull up and down for the adjustment?
Great
grazie per il video, semplice, veloce, ma nello stesso tempo ...... meraviglioso
Sencillo y rápido.., ¡¡ excelente...!!!
thanks mate, u r a genius
Surely not a genius, but happy to help!
Disco 💽 de Rei Charles 👍🇧🇷 4:47
Gracias quedo lindo y facil de hacer
Bravo
Quá đẹp.
Vip🎉
Bravo ! 👏
Can u tell what measurement u take in thise
Super
You didn't mention the size of the sticks, we want the sizes of each of them.
Hello there! At 0:33 you can see the dimensions i used, but you can modify them for your needs. Have a nice day
Ma afpaka super ho
Me encantó, me perdí en como se hace el artilugio para mover la altura, gracias
Could you tell me the measurements you used
Very Good!!
Merci, dommage qu'on a pas les matériaux détaillé au début
Latte de bois, colle et visserie aha
👍🙏
With Scale (Measurement) is highly suggested.
How do you stop the weight of the picture pushing the crossbar down?
It stays by friction and/or torsion. I tried to keep it very low cost, but you can use a screw on the back to secure it
Bonjour très beau. Possible d'avoir le plan détaillé des mesures de tous les tasseaux pour faire le chevalet merci
amazing bravooooo
Me sirve.Gracias.
Im struggling with the slide. How do I get it stable? It keeps sliding down
Well, if it doesn't stay by friction, you can insert a screw on the back of the slider so you can lock it in place. A less invasive way may be to insert something thin between the sliding parts. Hope it helps
🙂👍
❤️❤️
What are material required for making this woodworking project
It looks like 1by 2, which means it is o.5x1.5” actually in Canada wood shop
First impression a minute into the video:
This guy works like I do ... precariously holding a board in one hand and an electric saw in the other ...
In the kitchen (or any other family-type room) ....
As long as you're on the floor. THAT is the main thing.
Five bucks says his wife has given him a corner in her exercise room where he’s allowed to keep tools.
90% of the job is putting shelves up.
(edit) Hey! It ended up being a pretty good video.
Final thoughts? Yes. WTF is with the half-raped child’s doll on the shelf upper left frame at around 4:00 ?!
Its a action figure idiot-
@@tealisbored Well it's (with an apostrophe) an (with an n) ugly one, Professor.
And you sound angry. is it yours?
Great project!! 1000x cheaper to build than to buy and it looks like it was made from a manufacture shop! Two large thumbs up!! But what I'd like to know is... How do you keep that "slider bar" from falling down if you have something sitting on it? Perhaps, by drilling 1/4" holes through the 1x1 upright it slides up and down on, you could insert a small piece of dowel or a peg to keep the bar from falling or sliding down? I dunno!
bravo c super
I like the pinewood color.
how big is the canvas at the end?
What's the black liquid u applied?
Water based black paint...Im guessing the video said if you paint in house use a water based paint...😀😀hope that helps!!
You can show in box😊
🥰💪💋🌈
Thank you.
Thank you. !!!
Bom dia! Quais são as medidas das madeiras pra confecção deste cavalete???
4 x 2 cm
Excelente!!!!!!
Mii de 👍🏽
amigo tendras las medidas
Thank u so much 💜💜💜
Btw name this also as how it's in the english dictionary as: easel . Will help with s.e.o and video views
It is possible to have the exact dimensions please
Hi Anne. Second 30 of the video for the dimensions.
Thank you
What's price
Next time buy some brass screw cups, also drill the pieces first and then glue and screw together at the same time.
Aye!
Há eu tendi,só esse negócio que sobe desse.nao estou sabendo como colocar,😞😞
How Much Wood You Need