I've been looking for something clean, simple and smart like this for almost two years. Sending love and warm wishes from Canada! A little custom measurement mods and will be amazing over laundry shelving so little kids can't reach chemicals.
Hi Dekay. Thank you for the great videos. You architectural training shows in the dead simple execution of complex ideas. I'll be using them from now on in my shop projects.
I love this pull down drawer. It's smooth and clean work. I am intimidated but I will keep on replaying this until I am confident to do this. Thanks for sharing!
Отличная идея. Так можно по всему периметру стен сделать и будет все удобно, компактно и доступно. К обычным полкам тянуться надо, а тут полку к себе подтянул, выбрал что хотел и обратно, чтоб не мешалась. Зачет.
I see you like to use regular dowels as a bearing like substitute, in a very clever way. I've never seen anyone else doing this. Is it reliable? Could you detail more this mechanism in your next project? Great job!
I love this project! Have probibly seen it like 20 times now and plan to do some accessible upper cabinets, like these, in my kitchen and laundry station as I am short and use a wheelchair. Have you tested out the weight on this? Would a heavy duty gas strut give more weight capacity or would the wood break if it was used for plates as an example? THANK YOU for a lovely channel with so much creativity!!
Hey Dekay ! Great project. I was trying searching like this for quite some time but was not able to get it working. You have a great vision and a good understanding about geometry. Have seen many more projects of yours and its very creative. Keep it up man. I have one request for this Pull down shelf ... can you plz share the plan, I am not able to read the numbers and I am sure they are the most important part, without that I will not get it to work properly. So plz share the plan.
INCRÍVEL..., adorei e, como economiza espaço e facilita guardar os objetos, tem MUITOS campos de aplicações é só usar a criatividade! Abraço aqui do Brasil 🇧🇷
Very interesting approach. I like most of your vids, and this one in particular. I may be able to use this concept.... Thumbs up and thanks a lot for posting! Edit: And a huge thank you for the free dimensions at the beginning!
Hi, do you have plans available for this cabinet? It's one of the best versions I have seen when looking. You should make them available to buy, I'm sure many would pay a few dollars for them.
잘 봤습니다. 저는 일본에 살고 있습니다. 얼마전 3층 단독주택으로 이사를 하면서 꿈에 그리던 공방을 얻어냈습니다. 하지만 컴퓨터 책상을 두고 남는 공간은 1800*900합판 한장 편하게 자르지 못하는 공간입니다. 모든게 만족스러울 순 없었습니다. 그래도 빌미로 그동안 마련하고 싶었던 몇가지 전동공구를 허락받아 맘 바뀌기 전에 덜컥 사버렸는데 아니...지금은 정리가 시급한 상태가 되어버렸네요. 그래서 일단 작업이 가능할 정도로 물건을 정리하고 벽 한면을 공구정리에 사용하기로 했는데 올려주신 영상이 도움이 될것 같습니다.
Okay… I think in the tiny cabin I’m building in Alaska I’m gonna use these for upper cabinets, and the lower cabinets will be your design where the shelves come out sideways and then turn so you can see everything…. That leaves the corner cabinets… so, you need to design some lower corner cabinets that pop up (and upper corner cabinets that pull straight down). I know you’ve been thinking about it. If you or I wanted to drop cash and motorized it would be easy to do, but that isn’t me and it sure is t what you do on your channel…. So you need to design corner cabinets that pop up to access what’s inside, and then can be pushed back down to hide them. I’m asking for a lot, but it’s another video for you with another amazing design to get subscribers and views, go on, say “challenge accepted!”
Like the projects you made. Cool ideas. I saw the displayed pieces for construction. What type of software are you using to build it and represent it like that. Its nice and simple.
What is the idea with the dowels and screws for the hinge points? I like it, it just seems that after a while they would rub out the dowel and fail. I would think here a threaded rod with a pipe insert would work better, I have seen them a lot in the recent videos. If they are sound I just might start using them, or hell I guess i could just make something with it and if it fails then it fails :)
Hi! Your works are awesome! I have some question about your tools...I see that you use the Milwaukee M18 hammer drill and impact driver. Is it not so heavy for basic woodworking stuff like that? Do you need the full M18 power and weight? Is it hard to control them?....I hesitate between M18 and M12 series... Thanks for your help!
![Over head Storage : Auto Lifting & Swing Down [woodworking]](http://i.ytimg.com/vi/kruirmeO5Vo/mqdefault.jpg)
Отличная подача, не тратя время на показ пиления заготовок. Просто размеры и процесс сборки.
Супер!
I've been looking for something clean, simple and smart like this for almost two years. Sending love and warm wishes from Canada! A little custom measurement mods and will be amazing over laundry shelving so little kids can't reach chemicals.
Thats my exact reason as well.
same ive been looking for something this everywhere
Excellent! Thank you for showing a blueprint of the cabinet, too.
as a plywood lover, your channel is #1
Gereksiz ayrıntılarla can sıkmadığın için teşekkür ederim. Güzel çalışma olmuş.
I've been looking for this for ages!!
Thank you for sharing.
역시 팀장장 최고입니다 👍
저에게 꼭 필요한 캐비넷 입니다 ㅎㅎㅎ
역시 팀장님 손은 금손 👍👍🏆🍾🤩
신선한 아이디어 참 좋습니다
늘 빠짐없이 잘보고 있습니다.
항상 좋은 영상 감사합니다 좋아요 누르고 갑니다
코로나 바이러스 조심하시구요 건강 하세요
담에도 좋은 영상 부탁드립니다
김팀장님 쵝오!!!!!!!!!!!!!!!!!!!!!!!!
Hi Dekay. Thank you for the great videos. You architectural training shows in the dead simple execution of complex ideas. I'll be using them from now on in my shop projects.
What a great shelf. love your work. Thanks for sharing and best wishes from USA
항상 보면서 느끼지만 정말 대단한거 같아요..
늘 보면서 신기하기도 하고 경외감이 들기도 하고..
지금처럼 아이디어 넘치고 건승하시길 기원합니다.^^
너무 멋져요 👍항상 응원합니다 ㅎㅎ
novel idea, thanks for sharing
Great idea for my shop. Love how straight forward it is. Gotta design the parallel links in Fusion though or else they won't have the proper stop.
꼭 제손으로 만들기 도전해 보고 싶네요 영상 유익했습니다
Buenísimo! Tus videos siempre son innovadores... saludos desde Argentina 🙋🇦🇷
I love this pull down drawer. It's smooth and clean work. I am intimidated but I will keep on replaying this until I am confident to do this. Thanks for sharing!
I watch almost everything...because it's amazingly great...I admire Boss...success is always my Boss
A very good project and a very good idea to get storage. Best wishes from Germany
👍👍 very practical, perfect for people of short stature, like me 😁, and persons with disabilities. Thank you for sharing❣
Superb. Just brilliant. Thank you for sharing your inspirations.
Отличная идея. Так можно по всему периметру стен сделать и будет все удобно, компактно и доступно. К обычным полкам тянуться надо, а тут полку к себе подтянул, выбрал что хотел и обратно, чтоб не мешалась. Зачет.
Smart boy!!
Ótimo trabalho! Obrigada por compartilhar.
Hi my friend i. Khalid from Orlando Florida USA 🇺🇸 .. you are genius
와...... 이게 무슨 마법이냐..... ㄷㄷㄷ 항상 놀라움을 금치 못하네요 ㅜㅜ
I see you like to use regular dowels as a bearing like substitute, in a very clever way. I've never seen anyone else doing this. Is it reliable? Could you detail more this mechanism in your next project? Great job!
amazing work! just what I needed!!!
I love this project! Have probibly seen it like 20 times now and plan to do some accessible upper cabinets, like these, in my kitchen and laundry station as I am short and use a wheelchair. Have you tested out the weight on this? Would a heavy duty gas strut give more weight capacity or would the wood break if it was used for plates as an example? THANK YOU for a lovely channel with so much creativity!!
Excelente idea. Muchas gracias. Saludos desde Costa Rica
오호~~~ 도대체 관절의 끝은 어디인가요? ㅎ 또 한 번 감탄하고 갑니다^^
감사합니다~🤗
instablaster...
That's awesome! Another great project!
You are an amazing craftsman!!!!
Always inspiring, cool ideas
Brilliant project and in metric measurements as well.
Как всегда, все на высоте 👍
역시 멋져용 👍👍
Hey Dekay ! Great project. I was trying searching like this for quite some time but was not able to get it working. You have a great vision and a good understanding about geometry.
Have seen many more projects of yours and its very creative. Keep it up man.
I have one request for this Pull down shelf ... can you plz share the plan, I am not able to read the numbers and I am sure they are the most important part, without that I will not get it to work properly. So plz share the plan.
Another awesome build. Want one of these too.
INCRÍVEL..., adorei e, como economiza espaço e facilita guardar os objetos, tem MUITOS campos de aplicações é só usar a criatividade!
Abraço aqui do Brasil 🇧🇷
muito obrigado de verdade, eu estava em busca de algo assim para meus armários superiores, você é incrível!
I really like this. The dowel trick is very clever!
I'm not clear what he did with the dowels?
Excellent project. I liked it
Grate job!, Bello from México
amazing work and amazing tools 👌🏻💯
Man you are really good at this craft
مبدع تحيه كبير من مصر
뚝딱뚝딱 만드는것도 어렵지만 창의적인 머리가 안굴러가는게 속상해요ㅠ.ㅠ 공방 다니려는데 후아
멋지심다👍👍
Very nice build! I think a whole row of those would be great to use the space that is otherwise usless without step-ladder.
He's done a step ladder too,
Muy buen invento. Genial video
Fenómeno, eres un crack!!!
Хорошо, что чертежи сразу показаны. Приятно. Спасибо.
Great videos and smart ideas fit many things ,
Also, your tools are very organized , All the best !!!
It's very cool 👍 Hello from Russia 🖐
FANTASTIC!
Nice one Dekay! I have that M18 router too and love it.
Very interesting approach. I like most of your vids, and this one in particular. I may be able to use this concept....
Thumbs up and thanks a lot for posting!
Edit: And a huge thank you for the free dimensions at the beginning!
Brilliant. I'm going to adapt it with cover trim and use it in a nicely finished bathroom with crap storage.
Excelente gracias, desde veracruz México
First push like and then watch video beacuse i know the video,craft and work are amazing
This is soo f..king cool. Thanks mate for drawings!
That got a subscribe. 정말 좋아요.
That’s very nice, Dekay!
قمة الإبداع
way way cool. :-) Brilliant my friend. thanks for sharing.
Superbe très beau travail.....😉👍👍 Norbert ( France)
🎓Exellent main frend👌
Gretings from Serbia
👍👍👍👍👍👍👍👍
Deberías implementar plantillas para poder realizar tu trabajo. Esta genial lo que haces
Just to understand: you have dowels in the holes to screw into? If so, brilliant! TFP!
Very nice. I want one that goes from down against wall and swings up to perpendicular.
Gracias!! Fabuloso🙂
Very nice work
Hello from Germany
I need to find a good supplier of quality plywood. Nice work!
Like how you work it amazing
Great design!
Nice . Thanks for sharing
Very good job!👍👍
Excelente idea.
아이디어가 아주~ 쥑입니다.
WoW!! Just what i was looking for!!
Hi, do you have plans available for this cabinet? It's one of the best versions I have seen when looking. You should make them available to buy, I'm sure many would pay a few dollars for them.
잘 봤습니다. 저는 일본에 살고 있습니다. 얼마전 3층 단독주택으로 이사를 하면서 꿈에 그리던 공방을 얻어냈습니다. 하지만 컴퓨터 책상을 두고 남는 공간은 1800*900합판 한장 편하게 자르지 못하는 공간입니다. 모든게 만족스러울 순 없었습니다. 그래도 빌미로 그동안 마련하고 싶었던 몇가지 전동공구를 허락받아 맘 바뀌기 전에 덜컥 사버렸는데 아니...지금은 정리가 시급한 상태가 되어버렸네요. 그래서 일단 작업이 가능할 정도로 물건을 정리하고 벽 한면을 공구정리에 사용하기로 했는데 올려주신 영상이 도움이 될것 같습니다.
What a great idea.
Mantap sodara...👍
Salam dari indonesia
Спасибо за всё ,
И за чертежи!
Now this is a real space saver - would free up space normally occupied by a ladder. I'll adopt this idea all around my workshop.
Okay… I think in the tiny cabin I’m building in Alaska I’m gonna use these for upper cabinets, and the lower cabinets will be your design where the shelves come out sideways and then turn so you can see everything…. That leaves the corner cabinets… so, you need to design some lower corner cabinets that pop up (and upper corner cabinets that pull straight down). I know you’ve been thinking about it. If you or I wanted to drop cash and motorized it would be easy to do, but that isn’t me and it sure is t what you do on your channel…. So you need to design corner cabinets that pop up to access what’s inside, and then can be pushed back down to hide them.
I’m asking for a lot, but it’s another video for you with another amazing design to get subscribers and views, go on, say “challenge accepted!”
Good job!!!!
Nice work, my wife been looking and asking me to find Japanese style pull down kitchen cabinets. This function seem to be that style.
Excelente 👏🏻👏🏻👏🏻
Sei troppo Bravo ✌🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
항상 영상 잘 챙겨보고 있습니다~ 저도 작업실 하나 구하고 싶은데 부지를 구하고 쌓아올리는게 좋을까요? 지역은 교통 원활하면서 싼 곳이 좋을까요?
와, 아이디어 좋네 ㅎㅎ 신기방기 ㅋㅋㅋ 저도 전수좀 해주세요!
Like the projects you made. Cool ideas.
I saw the displayed pieces for construction. What type of software are you using to build it and represent it like that. Its nice and simple.
잘만드셨네요
What is the idea with the dowels and screws for the hinge points? I like it, it just seems that after a while they would rub out the dowel and fail. I would think here a threaded rod with a pipe insert would work better, I have seen them a lot in the recent videos. If they are sound I just might start using them, or hell I guess i could just make something with it and if it fails then it fails :)
I like your works
Hi! Your works are awesome! I have some question about your tools...I see that you use the Milwaukee M18 hammer drill and impact driver. Is it not so heavy for basic woodworking stuff like that? Do you need the full M18 power and weight? Is it hard to control them?....I hesitate between M18 and M12 series... Thanks for your help!
Parabéns Dekay, Vc é foda!
that is beautiful