ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- 🛒 2020+ Can-Am Spyder RT / RT Limited LED Light Bar Kit is available here: www.slingmods....
Introducing our LED Driving Light Bar for the 2020+ Can-Am Spyder RT & RT Limited. This kit features a 10" LED Light bar that emits a bright white light, that comes in at 6000k on the kelvin scale. The light bar mounting bracket is adjustable so that you can fine tune the position of the light bar itself. The kit also includes an OEM style waterproof dash switch that allows you to turn on/off the light bar at any time once the ignition is powered on.
Now if you've never ridden with an LED light bar, you're gonna love this mod. This LED Light bar drastically increases your visibility of the road ahead while riding at night. The extra light output allows you to see further down the road, so that you have more time to react to a potential road hazard that may lie ahead. Not only does it enhance your ability to see what's up ahead, but it also increases your likeliness of being seen by oncoming vehicles during the day and night.
I don't get it. Why not wire this light to the existing wiring for the "accessory light" from Can-Am. Clearly you can't use both lights together, since they mount in the same location. Why not use the existing wiring??
Some people want a separate switch as in a fog light. There are other light kits that connect to the factory plug, so are on when the ignition is.
Why didn’t you just use the existing wiring?
I have a question if you put in the toll hitch with the module and use that Switch that's up front were you supposed to put the Switch for the front light?
Hello George, this mod would require you to have an empty dash switch space available for the light bar switch.
Is there a way to order a new power cord for the LED light bar?
Hello Chris, that should not be a problem. If you could please contact our customer service team here: www.slingmods.com/index.php?route=information/contact or you can reach us at 800-211-1396 Mon-Fri 9am-5pm PST for assistance with this matter. Thank you!
Hola para la versión rt sea-to-sky está disponible
Gracias
Hola, sí... esto también funcionará en la versión Sea-to-Sky. ¡Gracias!
@@Slingmods gracias
Estaremos en contacto para gestionar el envío y forma de pago
I need a pedal commander waterproof case any suggestions?
Hello Tramier, we'll have a silicone boot for the Pedal Commander shortly. The prototypes are in my office. They're not water proof though.. they're water resistant. If you need waterproof, i'd recommend stashing the pedal commander away behind a body panel and using the free phone app to control it via bluetooth. Thank you!
Hola tengo un rt sea-to-sky del 2023 podria suminitras un luz como esa
Gracias
Hola, esto es compatible con la versión Sea-to-Sky. ¡Gracias!
This lightbar, is it possible to operate it via the low/high-beamswitch on the handlebar?
Not currently.. but we're working on a canbus library that will allow you to activate this light bar with the high beam switch.
Anything similar for a Spyder ST? If not what would you recommend for additional lighting on a 13 STs TY
Hello Mark, we have these for your bike: www.slingmods.com/can-am-spyder-dual-color-a-arm-running-lights-with-amber-turn-signal
@@Slingmods would you say these are more drl or addl brighter lighting. I was looking for something to throw off more light for night riding.
@@biffers9 The dual a-arm strips do not really throw off any light for night riding. They're more for looks and so that other motorists can see you at night.
@@Slingmods understood ty. Is there something similar for the rear?
@@biffers9 Hey Mark, not for your model regretfully. We didn't get into aftermarket Spyder parts until 2017... so almost all of our mods are for the F3 & RT models.
Do you have any similar for spyder rt limited 2016?
We do not at this time. My apologies.
Is it possible to have it permanently wired into the high beam circuit?
Hello Brett, not at this time.. but we're actually working with a company to MAP the canbus addressing for many bike functions such as high beams, brake lights, turn signals, etc. We'll have a new device in the upcoming months that will allow you to execute other 12v commands as an output when an assigned canbus address is associated with that task. Example: Turn on LED Light Bar, when High Beam is used. Stay tuned...