Do you know how to adjust the treble, bass etc on one of these units please? I can find the EQ in CarCan but doesn't let me change any of the settings. Thanks again for the video and info, Legend 🙌
@@whatsdavedone104 I have tried deactivating it in the canbus setting, but it continues to operate when I engage reverse gear or activate the direction indicators... but what if I try to cut the wire, interrupting the signal?!
my problem is that the same symbol for pdc comes on. even when i drive normally it comes on and i can’t click it away. so i can’t use my display until it goes away by itself
Which unit is it? Look at the wire harness and see if there is a small black plug with red and yellow or orange wires, unplug it. It doesn't need to be connected
Hi just installed mine last night, just like yours. Everything seems normal apart from when indicating left or right, the screen turns into reverse mode with the parking sensor car logo. After the indicator is turned off the screen returns back to normal. When on a phone call and indicating the call ends and the black screen into the reverse black logo along side the car sensor logo. Please help?
Yes there are pre outs for sub/amp and yes I have reverse camera. I no longer have this unit I have an Eonon VWA12S www.awin1.com/cread.php?awinmid=32471&awinaffid=1393517&clickref=VWA12S+&ued=https%3A%2F%2Fwww.eonon.com%2FAndroid-Car-GPS%2FVehicle-Specific-GPS%2Feonon-vw-seat-skoda-android-12-wireless-apple-carplay-android-auto-car-radio-with-4gb-ram-9-inch-qled-touch-screen.html%3FDTH-cam%26DDave-VWA12S%26_channel_track_key%3DKmX9Tlmi
k4811 octa-core(cortex-a55) sir do you know anything about this screen the camera is not working do you give me a way to program it connect the cable well
Hello! I have the same android unit. I set up my canbus type to Raise - Volkswagen and i picked the first option (with the number 01 and a lot of models). However, the door open detection does not work even though the option is activated. But when I switch to reverse it shows the back camera screen and when i switch back to neutral it goes back to the radio screen. Did I set the canbus correctly? Why my door detection isn't working? I have a Golf V Plus 2006
🤔 I don't know why it wouldn't show open doors. The cantus box is obviously working if it's showing reverse screen...if you go onto the car info/car can screen does it show fuel level etc?
@@whatsdavedone104 no, it doesn't show. It also shows a message like "the version is not detected" in the bottom left corner of the carcan app. The only thing that's working is the reverse gear detection. I know the car is 2006 but i bet it could at least read the basics from the canbus box. I don't know what to do. I eventually can try other canbus presets from Raise. But then the question is: if a preset is not supported, will the android unit completely stop working? Because it will be a mess to detach the unit and mount it again if the only thing that's powering the unit is the canbus. Correct me if I'm wrong
@@whatsdavedone104 yes, i was aware of that little plug when I've installed the unit. It is unplugged. But I remember it has 2 little black plugs. I unplugged the plug from the 16 pin harness and the other one is connected from the 12 pin harness
I dont really understand your question but I am guessing the screen is staying on after you take the key out....there is a small black plug in wire harness it needs to be unplugged...the wires are constant 12v meaning the unit remains on
Hi! I have an android similar to you and have a few questions if I may. My version is 8 GB, 128 GB internal memory, with Android 10.0 Car Edition (YT5760B_00002_V001). Can you help me download the latest android versions? I ask because I have problems with the radio signal; at the same time, the current version of Android has few setting options. Thank you in advance!
Hi, unfortunately it's not possible to update the android system on these units. You can update MCU but you would have to get that update directly from the seller/manufacturer of the unit
Hi, for me I cannot find the settings to change anything, when I open my drivers door it shoes that the passenger door is open and vice versa how can I fix this?
i have a unit and found how to do it for doors, when you click left front door the screen will pop up and you press right front door and same for all the others.
Hello, i have Can Bus Decoder plugged in my android device, but in CarInfo nothing shows up, as Fuel or RPM and etc. Do i need to enable it by going in Factory settings or something via password then enable? I have option Boot Logo and when u click on it , there is a password to enter. Is that?
@@whatsdavedone104 Xtrons PSF70MTWA , Seat cordoba 2004. Maybe cuz it's old car? I've enter the sercet menu and there is Can Bus Type , and i cannot find Seat anywhere.
2004 yeah that will probably be the issue, older canbus system on the car. Most android unit canbus boxs only work on newer cars...mk5 golf has to be set to mk6....Best thing to do is contact xtron and ask them 😀
@@whatsdavedone104 I've asked them on facebook, but not answer. Dunno what to do. I've tried few types of Can Type for VW, but noone of them works or have Seat on them.
@@whatsdavedone104 Thank you very much for your response, I have a question, I currently have the radio installed without the Canbus Box and the steering wheel controls work well, it is normal for this to work without the Canbus Box? Also you know if in the Chevrolet Aveo you could show information of the doors with the Canbus Box
Steering controls will work without Cambus box as its a signal sent via wire, factory units don't have canbus boxes.... Yes the door information will show if you have canbus box, you will also get information like fuel level, outside temp and engine rpm displayed. This is covered in other videos of mine.
In kms its correct if you convert to miles, the developers didn't use full 0.621 only used 0.6 in their maths....if the car doesn't know the bonnet is open then the head unit won't
I can't remember, purchased it back 3½ years ago...the unit and car have long since gone. I currently have Eonon Q53pro in 1 of my VWs and Eonon VWA12S in the other
Hi Dave...I guess,We owner same car radio...So,Do you know developer Mode password ? I tried many numbers:000000-888888-123456-0000-4444-8888-8990 and unfortunately not working...Can you help me this about?
@@Bwest-1989 Tx for code but I think I tried this code(0000,1111,2222,3333....9999 etc) but I may be misremembering..I'll try again...I hope accepted 8888...
Factory reset should be under settings then about device, if it isn't there the follow my video I have linked here th-cam.com/video/saLWYXwj1vw/w-d-xo.html
If nothing is wrong then just do as I did in the video, tap 5 fingers on the screen as its booting and it will go into recovery mode then you can factory reset
I have a problem with my golf 5 2006 with radio. When I connect canbus work fine 10 min end then turn off radio end I can't started again, I need to turn off car , and after 1- 2 min then I can started again. End everything hapen again. Without canbus I can't turn on the radio is it seems to have no power. Can somebody help me?
Factory reset should be under setting, at bottom of list on the first page that has network settings at top of list....if its not there the check reset video on my channel
I've just done it on my Android 10 Xtrons. It's still in the car settings, bottom menu (think it's 'system' or something) and then the first menu item should have a cog on the right. A load of different pin codes can access different areas then. On mine 8888 enters this area where you can find the reverse for the doors. Could be slightly different on yours if an earlier model though.
Olá amigo, tenho uma central multimidia desta e estou com problema no volume até o volume 22 e baixo, após o volume 23 o volume aumenta demais, pode me ajudar?
Vai ao ecrã das opções Canbus (depois de inserires o código 000000) e faz scroll para baixo. Tens uma opção que se chama "Amp Volume" ou algo similar. Se estiver no máximo, ajusta para 10 ou 20 %.
@@whatsdavedone104 Sure. I was replying to Adaian who wrote a comment in brasilian portuguese. He needs to go to the canbus options, after inserting the 000000 code, scroll down, check the option Amp volume. Need to reduce the value quite a bit. I did the same on mine, still has an issue from 20 and up, but at least the minimum volume is acceptable (was way toooo loud even at volume 1).
Hello, I would like you to help me. I have a hikity screen with a “manjus” model canbus box. In a 2008 Volkswagen Jetta. The function of the steering wheel controls is excellent. However, there is a door that does not work and the vehicle's kilometers do not appear. Also when the air conditioning appears on the screen. If I hate to help, I would appreciate it. thank you
@@whatsdavedone104 already got the developer mode. But when i try to enter it will prompt requesting password. For carsetting it will be 000000. But for this one its different
Thank you so much. I wanted to hide these alerts, they are annoying to me
Do you know how to adjust the treble, bass etc on one of these units please? I can find the EQ in CarCan but doesn't let me change any of the settings. Thanks again for the video and info, Legend 🙌
Nice information bro thank y so much 💪
No problem 😊
I have this stereo, I want to permanently deactivate the rear view camera, how can I do this?
I do not use it
It's in the canbus settings...I no long have this unit, now have the Eonon Q53pro
@@whatsdavedone104 I have tried deactivating it in the canbus setting, but it continues to operate when I engage reverse gear or activate the direction indicators... but what if I try to cut the wire, interrupting the signal?!
Yes cutting the wire is an option...I think, not 100% sure, its the pink wire in the harness
Yes, just checked its the pink wire running to canbus box
@@whatsdavedone104 thank,s
my problem is that the same symbol for pdc comes on. even when i drive normally it comes on and i can’t click it away. so i can’t use my display until it goes away by itself
Hello, the radio does not turn off when I remove the ignition key, what should I do? Thanks
Which unit is it? Look at the wire harness and see if there is a small black plug with red and yellow or orange wires, unplug it. It doesn't need to be connected
I'll try this - it says my hood is open when it is latched. Tried closing hood again, still says open. (Red hood icon)
Hi just installed mine last night, just like yours.
Everything seems normal apart from when indicating left or right, the screen turns into reverse mode with the parking sensor car logo. After the indicator is turned off the screen returns back to normal.
When on a phone call and indicating the call ends and the black screen into the reverse black logo along side the car sensor logo.
Please help?
I am at a loss 🤷is it the head unit you have installed or the reverse camera?
You probably attached rear camera wire to indicators instead of reverse light
Sir pls say . In which wire of the stereo we have to connect door switchs
The door display on the unit is controlled by the canbus box of the headunit...no wires need connection to the actual doors
keeps saying cheap but it’s the best you can get for that price
So it just showing all kind of stuff? 😀
Do you have amp subwoofer settings rca cable? Etc rear view camera😀
Yes there are pre outs for sub/amp and yes I have reverse camera.
I no longer have this unit I have an Eonon VWA12S
www.awin1.com/cread.php?awinmid=32471&awinaffid=1393517&clickref=VWA12S+&ued=https%3A%2F%2Fwww.eonon.com%2FAndroid-Car-GPS%2FVehicle-Specific-GPS%2Feonon-vw-seat-skoda-android-12-wireless-apple-carplay-android-auto-car-radio-with-4gb-ram-9-inch-qled-touch-screen.html%3FDTH-cam%26DDave-VWA12S%26_channel_track_key%3DKmX9Tlmi
Great thanks.
k4811 octa-core(cortex-a55) sir do you know anything about this screen the camera is not working do you give me a way to program it connect the cable well
I don't really understand your question 😕 here is how you wire the reverse camera
th-cam.com/video/fl-vwLAIu7U/w-d-xo.htmlsi=hINmTLcOBEZnRwOD
@@whatsdavedone104
Hi
It worked great, but what model is it????
What model is what, the car, the headunit 🤷♂️
Car radio unit model@@whatsdavedone104
I can't remember....I purchased its around 3½ years ago, it was very cheap....just a generic unit, no branding
Wished the software was still like these
instaBlaster
Hello! I have the same android unit. I set up my canbus type to Raise - Volkswagen and i picked the first option (with the number 01 and a lot of models). However, the door open detection does not work even though the option is activated. But when I switch to reverse it shows the back camera screen and when i switch back to neutral it goes back to the radio screen. Did I set the canbus correctly? Why my door detection isn't working? I have a Golf V Plus 2006
🤔 I don't know why it wouldn't show open doors. The cantus box is obviously working if it's showing reverse screen...if you go onto the car info/car can screen does it show fuel level etc?
@@whatsdavedone104 no, it doesn't show. It also shows a message like "the version is not detected" in the bottom left corner of the carcan app. The only thing that's working is the reverse gear detection. I know the car is 2006 but i bet it could at least read the basics from the canbus box. I don't know what to do. I eventually can try other canbus presets from Raise. But then the question is: if a preset is not supported, will the android unit completely stop working? Because it will be a mess to detach the unit and mount it again if the only thing that's powering the unit is the canbus. Correct me if I'm wrong
Do you have the small black plug in the harness connected or unplugged? It needs to be unplugged when using the canvas box
@@whatsdavedone104 yes, i was aware of that little plug when I've installed the unit. It is unplugged. But I remember it has 2 little black plugs. I unplugged the plug from the 16 pin harness and the other one is connected from the 12 pin harness
@@Gabriel-ue3jf same problem, any solution ?
What's the name of the launcher you have on your HOME screen?
I don't know, it's what came with the unit 🤷
Hello, how do I program the screen like the one you have with the car key, thanks for the valuable information
I dont really understand your question but I am guessing the screen is staying on after you take the key out....there is a small black plug in wire harness it needs to be unplugged...the wires are constant 12v meaning the unit remains on
Hi! I have an android similar to you and have a few questions if I may.
My version is 8 GB, 128 GB internal memory, with Android 10.0 Car Edition (YT5760B_00002_V001).
Can you help me download the latest android versions?
I ask because I have problems with the radio signal; at the same time, the current version of Android has few setting options.
Thank you in advance!
Hi, unfortunately it's not possible to update the android system on these units. You can update MCU but you would have to get that update directly from the seller/manufacturer of the unit
On my screen I have a car icon and red front hood, but it's closed.Anybody knows why?
Hi, for me I cannot find the settings to change anything, when I open my drivers door it shoes that the passenger door is open and vice versa how can I fix this?
Different units have different ways to get into the settings...which brand of unit are you running and which android version 🤔
i have a unit and found how to do it for doors, when you click left front door the screen will pop up and you press right front door and same for all the others.
Could you make a video on how to change the layout? I don’t like mine
You need to download a launcher from playstore to change the layout.
I would recommend carwebguru
Thankyou, it’s a shame you haven’t got a app where you could download all your music free on the double din
@@ikxzq4102 you could try a music download app called YT3 its an apk app and downloads music for free from TH-cam....go on Google and search YT3 apk
Hello, i have Can Bus Decoder plugged in my android device, but in CarInfo nothing shows up, as Fuel or RPM and etc. Do i need to enable it by going in Factory settings or something via password then enable? I have option Boot Logo and when u click on it , there is a password to enter. Is that?
If its not showing in carinfo then your canbus might not be set up correctly or it's connected wrong...which unit do you have?
@@whatsdavedone104 Xtrons PSF70MTWA , Seat cordoba 2004. Maybe cuz it's old car? I've enter the sercet menu and there is Can Bus Type , and i cannot find Seat anywhere.
2004 yeah that will probably be the issue, older canbus system on the car. Most android unit canbus boxs only work on newer cars...mk5 golf has to be set to mk6....Best thing to do is contact xtron and ask them 😀
On the xtrons site it does state its compatible with 02-06 seat cordoba 🤷
@@whatsdavedone104 I've asked them on facebook, but not answer. Dunno what to do. I've tried few types of Can Type for VW, but noone of them works or have Seat on them.
Hi the screen is very bad logos are like toys. what kind of adjustment do I need to make
Sorry I don't understand your question 🤷♂️
how do hard reset on this multimedia android ?
Go to settings, bottom of list tap system, then tap about device, down to bottom of list should be a factory reset option
is it necessary to use canbus box? the radio does not have canbus internally
Yes you need the canbus box, without out it the radio will remain on, not tell you which doors are open, fuel level etc
@@whatsdavedone104 Thank you very much for your response, I have a question, I currently have the radio installed without the Canbus Box and the steering wheel controls work well, it is normal for this to work without the Canbus Box? Also you know if in the Chevrolet Aveo you could show information of the doors with the Canbus Box
Steering controls will work without Cambus box as its a signal sent via wire, factory units don't have canbus boxes.... Yes the door information will show if you have canbus box, you will also get information like fuel level, outside temp and engine rpm displayed. This is covered in other videos of mine.
Hi plz can we show the info messages in the screen for example when the engine check lamp is on ?? Thanks
Sorry I don't understand what you mean 🤔
How can I change the time and date of my vehicle dashboard from my android radio
Help 🙏🏻
The time/date is set via GPS signal or mobile hotspot, whichever connects first
Hi Dave mine won’t tell me when the bonnet is open but the all the other signals are ok ,any way how I could fix that up ?cheers
Mine doesn't tell me if bonnet is open, only door and boot 🤷
@@whatsdavedone104 same mate strange .must be a way how to sort it out really bothers me 😂😂
I also don't get bonnet open displaying on my dash but I do boot and doors
@@whatsdavedone104 yes mate same I’ve also noticed it shows few hundred of miles extra to 😂😂
In kms its correct if you convert to miles, the developers didn't use full 0.621 only used 0.6 in their maths....if the car doesn't know the bonnet is open then the head unit won't
Which android head unit is that...
I can't remember, purchased it back 3½ years ago...the unit and car have long since gone.
I currently have Eonon Q53pro in 1 of my VWs and Eonon VWA12S in the other
@@whatsdavedone104 does it also have that door settings feature.the EONON
Hi Dave...I guess,We owner same car radio...So,Do you know developer Mode password ? I tried many numbers:000000-888888-123456-0000-4444-8888-8990 and unfortunately not working...Can you help me this about?
I don't have this head unit any more, or the car 🙈 have 2 mk6s instead. 567890, 126, 6789, 67890🤷♂️
8888
@@Bwest-1989 Tx for code but I think I tried this code(0000,1111,2222,3333....9999 etc) but I may be misremembering..I'll try again...I hope accepted 8888...
Hi how do i factory reset the whole screen not just the settings
Factory reset should be under settings then about device, if it isn't there the follow my video I have linked here th-cam.com/video/saLWYXwj1vw/w-d-xo.html
@@whatsdavedone104i do not have a reset button mine, mine is like the one in this video nothing wrong with mine but i need to do a factory reset
If nothing is wrong then just do as I did in the video, tap 5 fingers on the screen as its booting and it will go into recovery mode then you can factory reset
@@whatsdavedone104 nothing will happen right? Will it just be as if im doing a normal reset?
It will do a factory reset and return it to how it was when you received the headunit from new
Air con on flot is a small app comes on screen you can move round when you push the app it opens to A/C settings
I have found it only works if you have the electronic heater buttons, I have dials so ot doesn't work 😥
@@whatsdavedone104 I just fitted my android and still trying to get the hang of it.. I have front facing camera but can't get it to work
Front camera for parking or DVR? I have a front camera on my mk6 for parking, works with reverse.
@@enfield7123 here is my video on front camera th-cam.com/video/r0v82d1sml4/w-d-xo.html
I have a problem with my golf 5 2006 with radio. When I connect canbus work fine 10 min end then turn off radio end I can't started again, I need to turn off car , and after 1- 2 min then I can started again. End everything hapen again. Without canbus I can't turn on the radio is it seems to have no power. Can somebody help me?
Which brand of headunit is it...do you have a link...have you tried doing a full factory reset of the unit?
How to do full factory reset? I have done same reset but I don't know is this full factory r.
Factory reset should be under setting, at bottom of list on the first page that has network settings at top of list....if its not there the check reset video on my channel
What model is this?
I can't remember, had that unit about 3 years ago. Was still in the car when I sold it 5 months ago🤷
Hola, como puedes abrir el ecualizador con android 10 ?
🤔 equaliser only works if playing music via USB stick...
i have same headunit same settings exactly but door feature not working. it's set as open in setting. pls help
Is it not showing any of the doors open? Does it show reverse view screen when you engage reverse gear?
can u do this on xtrons?
Yes it can be done on xtron unit, not sure on there settings but there are lots of xtron videos on TH-cam
@@whatsdavedone104 thx sm
I've just done it on my Android 10 Xtrons. It's still in the car settings, bottom menu (think it's 'system' or something) and then the first menu item should have a cog on the right. A load of different pin codes can access different areas then. On mine 8888 enters this area where you can find the reverse for the doors. Could be slightly different on yours if an earlier model though.
Olá amigo, tenho uma central multimidia desta e estou com problema no volume até o volume 22 e baixo, após o volume 23 o volume aumenta demais, pode me ajudar?
Very sorry but could I have your question in English please 🙏
Vai ao ecrã das opções Canbus (depois de inserires o código 000000) e faz scroll para baixo. Tens uma opção que se chama "Amp Volume" ou algo similar. Se estiver no máximo, ajusta para 10 ou 20 %.
Could I have your question in English please 🙏
@@whatsdavedone104 Sure. I was replying to Adaian who wrote a comment in brasilian portuguese. He needs to go to the canbus options, after inserting the 000000 code, scroll down, check the option Amp volume. Need to reduce the value quite a bit. I did the same on mine, still has an issue from 20 and up, but at least the minimum volume is acceptable (was way toooo loud even at volume 1).
Hello, I would like you to help me. I have a hikity screen with a “manjus” model canbus box. In a 2008 Volkswagen Jetta. The function of the steering wheel controls is excellent. However, there is a door that does not work and the vehicle's kilometers do not appear. Also when the air conditioning appears on the screen. If I hate to help, I would appreciate it. thank you
Do you have the developer mode passwords?
Don't think you need a password....just tap developer option about 7 to 10 times I think 🤷♂️
@@whatsdavedone104 already got the developer mode. But when i try to enter it will prompt requesting password. For carsetting it will be 000000. But for this one its different
@@hafizrashak3932 try 8888 🤷♂️
@@whatsdavedone104 tried it but wrong password.
@@hafizrashak3932 try 7890** (** Enter the current hour unit, for example 03.14 (** = 03)