I have the version 3 on my 7mm REM mag. Last time out I set the rifle down, laid next to it…..all by myself at the desert range, and 1 M and F game and fish officers kinda snuck up behind me. Put the first cold shot and the next 4 on the steel at 700 yards right away. They were impressed. Just as easy at 1000 but the range was limited to 700. Great scope, optics on the Gen. 3 is “ok”.
My Eliminator III developed an electronic problem, and was replaced with a IV. The IV ranges much further and much quicker, but has a bright blue flashing light on the side that is super annoying at night - a stupid thing to put on a scope.
I would play around with mounting that button on the stock where your left thumb would be. When you hold the rifle with your left hand, you could quickly push the button by simply moving your thumb rather than having to take your hand off the gun, push the button, then move your hand back up to the gun. Lot less hand/arm movements where a quick shot would need to be made for hunting. Just a thought. I am going to buy one!
At 300 meters, with a 6.5 CM, the Point of impact is the point of aim for a steel target. less than 3 inches of drop. Id like to see you get out to 600+
I own the 3 and 4. My wife is hitting plate at 800 with her eliminator 3. Magnification is holding back on anything further, the light takes up allot of the target at 800 on 1/2 ipsc plate.
The new Eliminator 6 is a truly revolutionary scope in the Eliminator line. All it needs is a bit better reticle and the Hornady 4DOF ballistic engine to be supremely accurate.
Can it also be used at very close distances ? (10-100m). In order to compensate for the need of hold over/hold under to be perfectly accurate at close distances despite the gap between scope and barrel ? (I do have to shoot extremely precisely at various distances in this range and since I don't have the time to turn turrets, nor the envy to measure with a separate rangefinder and adapt the reticles scales according, it would be great to just have to click a button and to have the aimpoint right on spot !) . But I think this works only at longer distances and it also seems not to be very flexible if there are only the set dots that can illuminate ?...) (sorry for my bad english !)
@@anthonysullivan4202 Reason for the rangefinder is to measure the exact distance. Are you personally able to determine exactly how far is 100 yards if you're in unfamiliar hunting grounds without a rangefinder?
usually yes, most common hunting cartridges are point and shoot out to 200yds when sighted in at 100 but yes the laser will give you a range under 50 yds @@commonsense5709
How do you mount it on a cantilevered scope rail? Will it hold up to recoil from .50BMG? I have downloaded the app to my android and it's got a lot of flexibility on tap. But.... What do I need to do to mount it effectively on an M82A1 and will it survive use?
Burris Eliminator 6. Cause I bought one more for my other Browning X-bolt speed rifle 7MM PRC. But can't find out the ammo "Hornady precision Hunter ELD-X 7mm PRC" from CARTRIDGE list. So Disappointed ! Waste my money!😢
@@evanwindom3265 tf are you talking about? Yes plenty of people do. And it's going to be at least as accurate as you can figure on your own or with a ballistic calculator.
@@travisrasmussen9201 Set up an older model for a friend, it was a pain in the ass. I could have zero'd a regular scope and had dope for it in minutes, verified at distance in less than an hour. It took two trips to the range make corrections on the scope so it would be reasonably accurate out to 600. Still wouldn't trust it past 600. No problem with a regular scope that I'd dial for distance. Easy and accurate.
![ไลฟ์สุ่ม iPhone 295 บาท... โกงมั้ย?[ โกงมั้ยครับ ep.97 ] | DOM](http://i.ytimg.com/vi/gdstHEE4UUE/mqdefault.jpg)
I absolutely love these scope's ! I have a new excitement about shooting now !!
up to what distance you shot with it? and you really don't have to do any calculations, you press the button and hit the target?
I have the version 3 on my 7mm REM mag. Last time out I set the rifle down, laid next to it…..all by myself at the desert range, and 1 M and F game and fish officers kinda snuck up behind me. Put the first cold shot and the next 4 on the steel at 700 yards right away. They were impressed. Just as easy at 1000 but the range was limited to 700. Great scope, optics on the Gen. 3 is “ok”.
My Eliminator III developed an electronic problem, and was replaced with a IV. The IV ranges much further and much quicker, but has a bright blue flashing light on the side that is super annoying at night - a stupid thing to put on a scope.
I would play around with mounting that button on the stock where your left thumb would be. When you hold the rifle with your left hand, you could quickly push the button by simply moving your thumb rather than having to take your hand off the gun, push the button, then move your hand back up to the gun. Lot less hand/arm movements where a quick shot would need to be made for hunting.
Just a thought. I am going to buy one!
At 300 meters, with a 6.5 CM, the Point of impact is the point of aim for a steel target. less than 3 inches of drop. Id like to see you get out to 600+
Exactly I think it's a little weird to have not done this video on a longer range.
I own the 3 and 4. My wife is hitting plate at 800 with her eliminator 3. Magnification is holding back on anything further, the light takes up allot of the target at 800 on 1/2 ipsc plate.
Thank you.
Looks like a grea scope.
Xmas is around the corner.
If you zero at 200 does it show hold DOWN for 100 as well as hold up for all other ranges?
The new Eliminator 6 is a truly revolutionary scope in the Eliminator line. All it needs is a bit better reticle and the Hornady 4DOF ballistic engine to be supremely accurate.
How's it with heavy recoil ???
How much ???
Can it also be used at very close distances ? (10-100m). In order to compensate for the need of hold over/hold under to be perfectly accurate at close distances despite the gap between scope and barrel ? (I do have to shoot extremely precisely at various distances in this range and since I don't have the time to turn turrets, nor the envy to measure with a separate rangefinder and adapt the reticles scales according, it would be great to just have to click a button and to have the aimpoint right on spot !) . But I think this works only at longer distances and it also seems not to be very flexible if there are only the set dots that can illuminate ?...) (sorry for my bad english !)
Impressive !! Thanks for another Great Vid brother !!
Why's it made to require pressing a button for an update instead of always actively updating? Seems inconvenient... is it to save on battery life?
What is the closest distance the laser picks up to give a reading?
Probably around 5 yards
you dont need a range under 100yds if its sighted in at 100
@@anthonysullivan4202 Reason for the rangefinder is to measure the exact distance. Are you personally able to determine exactly how far is 100 yards if you're in unfamiliar hunting grounds without a rangefinder?
usually yes, most common hunting cartridges are point and shoot out to 200yds when sighted in at 100 but yes the laser will give you a range under 50 yds
@@commonsense5709
Would you say this is better than conventional scopes with turrets
How do you mount it on a cantilevered scope rail?
Will it hold up to recoil from .50BMG?
I have downloaded the app to my android and it's got a lot of flexibility on tap.
But....
What do I need to do to mount it effectively on an M82A1 and will it survive use?
I own the mk2 3-10×40. Yes, they briefly made a much more compact eliminator but it didn't sell v well.
How much does it weigh
I can used with 30.06?
May I know what happened to your other popular gun channel? I used to see your videos a lot, but had a gap recently?
Burris Eliminator 6. Cause I bought one more for my other Browning X-bolt speed rifle 7MM PRC. But can't find out the ammo "Hornady precision Hunter ELD-X 7mm PRC" from CARTRIDGE list. So Disappointed ! Waste my money!😢
I lost the cover that covers the weight, how do I get it in Saudi Arabia?
What kinds of results do you get in terms of precision on paper? Banging away at steel is fun, but MOA matters, too. Do you have any results for that?
It's as accurate as the data you put into it. It accounts for every aspect of the gun, the ammo, and the environmental conditions.
@@blakehillusmc So, no. Got it.
@@evanwindom3265 tf are you talking about? Yes plenty of people do. And it's going to be at least as accurate as you can figure on your own or with a ballistic calculator.
Can This riflescope linked with Kestrel to provide adjustment data?
you don't need adjustment data with these once they're set for your bullet
Does it work with pcp guns ?
Do they zero pretty good !?
yes
Great scope!! Just a bit heavy. 👍👍💯🇨🇦
they're lighter than your average 3-9x40 scope
I could not get one 😢 recession, grocery prices, gas prices, scope prices out of my budget for now will the world ever get back?😢😢
I feel your pain...
Sell unwanted/used items. Bicycle, treadmill, Ford, wife, and children if absolutely necessary.
Mine wouldn't go past 800 yards ..but the lazer would go to 1900 yards
Where's the laser?
built in the scope
@@jtn-minn8105 I don't see it
It’s not in the visible nm spectrum, just like a golf range finder. The “laser” is just finding the range, not putting a visible dot on the target.
@@gpracer1 ik that, I just don't see the emitter. Is it inside the glass of the scope itself?
Yes
E know when it records video also
you sound like scooth ..
Can you mount the Bluetooth button on a rail?
Wouldn't wish one of these on my enemies.......
Why
@@travisrasmussen9201 Set up an older model for a friend, it was a pain in the ass. I could have zero'd a regular scope and had dope for it in minutes, verified at distance in less than an hour. It took two trips to the range make corrections on the scope so it would be reasonably accurate out to 600. Still wouldn't trust it past 600. No problem with a regular scope that I'd dial for distance. Easy and accurate.
there's nothing easier than an eliminator once setup correctly which is easy 15s job
@@craigsanders6925
Great review