I downloaded this video and screen shot the description so I will always have it 😂 looks amazing subscribed will be back to learn a tonne. Someone activated god mode in this guy thankyou my friend!
i know this is a year old video, but do you have any interest in data from a Rotunda VCMII, and the FDS (Ford Diagnostic Software) data that may allow you and I to work together to make a linux base open source data set for almost every single make and model of car covered by the SAE and EUR, OBDII standard, possibly even moving into tge newer models as well. my plan is to make use of the Right To Repair laws that have passed recently in the USA to build a software for my personal use both at work (ford technician) and at home (I.C.E. experimental engineering, building, and tuning.) Current project is to build a software that can be run in a linux environment, perhaps RaspberryPi, or Arduino IDE, that can be a standalone unit for scanning, but also installed permenantly in a vehicle to act as a scanner and tuner.
Very cool. I also have a W246 that is showing "Transmission malfunction" on the dashboard. Would I be able to see the error codes with OpenVehicleDiag and an Arduino with CAN shield? No local sellers of the Macchina adapters in my country. Thanks!
I'm in the market for a bidirectional scan tool and stumbled upon your work. Need to reprogram a 2004 Chevrolet Colorado BCM. Any thoughts on achieving this via OVD + Macchina?
Can your software be used to interface with the car functions say to control the A/C from a touch screen head unit? Something like the iDatalink Maestro RR2 adapters for other cars?
Technically yes, but practically no. This is meant to be done via the OBD-II port of a vehicle, which tends to be firewalled so you can't send whatever you want over the port. If you know what CAN Frames to send to the A/C control module to control things like temperature, then there is nothing stopping you from hard-wiring directly into the CANBUS network with an Arduino and sending custom CAN Frames. This is similar to what I have already done with my mbux-port project: th-cam.com/play/PLxrw-4Vt7xtstJgl7B1ayPXBFBRulu41J.html
Very cool! However, I'm not sure if I understood correctly: Are the JSON files required in order to run commands on any control unit, or will that also work when the software discovers them?
Any way to make this work over K+DCAN cable? I want to make a datalogger for my R53 Mini (ems2000 ecu). Only things available are closed source proprietary crap...
This is great, are you still working on it? What about for J1708/J1939 protocols? Trying to read codes on a 2000 Chevy 8500 with a CAT 3126B Diesel engine
This is so cool ! I'd love to contribute to this project. Will I be able to reset the SRS Aribag module on my Nissan using this and SocketCAN ?
2 ปีที่แล้ว
Could these JSON files for the ECU data be used for example in Torque or such android applications? Or is it because of the ELM327 OBD adapter that those apps can’t find alot of info from the ECU on my 270 CDI?
Hi mate , I've managed to drive my car over my obdstar x300m and ruined it .however the memory card which contains the software is intact . Is there a way that I can run the programs on a laptop or tablet ? 🤔 thanks.
hi, can you tell me which OBD interface is best for MB W218 2010-2011? Or most can? Would like to do chip tuning etc. myself. I would also be happy about a software recommendation! :) Thank you!
Hello Rand I have downloaded your software on two of my PC that are running on Windows 7 on 64-bit and genuine on 32 bit but it seems like the program is on able to run could you provide some help please
But if the obd reader used a correct can bus chipset then no programming would be necessary . You just have to get the right software.. is all in the software and parameters provrammed into the software that coincide with the vehicle’s as built code.. so you dont brick the ecu
Not working on w210. I'm using 38 pin connector to plug in a0. Everything's connected, and it's scanning for ISO-TP but can't read any errors. Just says that no ISU-TP capable ECUs were found in my vehicle. Any suggestions?
Hate to say this but pretty much the only thing you can do at this point is get a newer car....A0 doesn't and will never support LIN especially as it's a long dead protocol.
hope you got your degree... lol Congrats is it possible to make a video explaining how to build a json schema for other brands ??? "I know theres a explanation doc" that would make it real universal and my pcb order build diy .. thx anyway for the open source
What a champ , progress looks amazing
I downloaded this video and screen shot the description so I will always have it 😂 looks amazing subscribed will be back to learn a tonne. Someone activated god mode in this guy thankyou my friend!
Thank you for making the world a better place!
OMG GIVE THIS MAN A MEDAL OF HONOR LIKE DAMNNN HE GAVE ME HOPE plus i didnt forgot that caps is on its im that excited
Very interesting, thanks for sharing, I may tinker with this. I've been slowly learning how to use my M2
WHat is an M2? Is that your macbook chip?
As a broke guy who is trying to be a mechanic to make some change I appreciate this
It’s been 8months since ur comment. Has this video helped u out to the extent u expected?
i know this is a year old video, but do you have any interest in data from a Rotunda VCMII, and the FDS (Ford Diagnostic Software) data that may allow you and I to work together to make a linux base open source data set for almost every single make and model of car covered by the SAE and EUR, OBDII standard, possibly even moving into tge newer models as well.
my plan is to make use of the Right To Repair laws that have passed recently in the USA to build a software for my personal use both at work (ford technician) and at home (I.C.E. experimental engineering, building, and tuning.)
Current project is to build a software that can be run in a linux environment, perhaps RaspberryPi, or Arduino IDE, that can be a standalone unit for scanning, but also installed permenantly in a vehicle to act as a scanner and tuner.
Pretty exciting. Ordering an M2 now!
I love this project! Good job
Very cool. I also have a W246 that is showing "Transmission malfunction" on the dashboard. Would I be able to see the error codes with OpenVehicleDiag and an Arduino with CAN shield? No local sellers of the Macchina adapters in my country. Thanks!
same here , were you to them error codes on with CAN shield
I was able to find OpenPort 2.0 OBD adapter here. It is a pass thru adapter. It worked fine with xentry. It may be available in your country
I'm in the market for a bidirectional scan tool and stumbled upon your work. Need to reprogram a 2004 Chevrolet Colorado BCM. Any thoughts on achieving this via OVD + Macchina?
Here is another project more focussed on bi-directional control. th-cam.com/video/HEmI2MzDya4/w-d-xo.html&ab_channel=Roudter
Can your software be used to interface with the car functions say to control the A/C from a touch screen head unit? Something like the iDatalink Maestro RR2 adapters for other cars?
Technically yes, but practically no. This is meant to be done via the OBD-II port of a vehicle, which tends to be firewalled so you can't send whatever you want over the port.
If you know what CAN Frames to send to the A/C control module to control things like temperature, then there is nothing stopping you from hard-wiring directly into the CANBUS network with an Arduino and sending custom CAN Frames. This is similar to what I have already done with my mbux-port project: th-cam.com/play/PLxrw-4Vt7xtstJgl7B1ayPXBFBRulu41J.html
Here is another project more focussed on bi-directional control. th-cam.com/video/HEmI2MzDya4/w-d-xo.html&ab_channel=Roudter
Hi, Where can I purchase your software and where do I get a Macchina m2 from?
Please answer
Very cool! However, I'm not sure if I understood correctly: Are the JSON files required in order to run commands on any control unit, or will that also work when the software discovers them?
Any way to make this work over K+DCAN cable?
I want to make a datalogger for my R53 Mini (ems2000 ecu).
Only things available are closed source proprietary crap...
came here to ask the same for my R50
This is great, are you still working on it? What about for J1708/J1939 protocols? Trying to read codes on a 2000 Chevy 8500 with a CAT 3126B Diesel engine
Hi dear great work i have thr Macchina a0 i download ovd its not working on Windows 7? Any issues
Awesome! Stuff!!
Hi,
What program are you using to the log the driver? The black screen in the 11:28s
vediamo 04.02.02
This is so cool ! I'd love to contribute to this project. Will I be able to reset the SRS Aribag module on my Nissan using this and SocketCAN ?
Could these JSON files for the ECU data be used for example in Torque or such android applications? Or is it because of the ELM327 OBD adapter that those apps can’t find alot of info from the ECU on my 270 CDI?
is it possible to connect new key fob with OpenVehicleDiag?
I like the tool but it doesn't have graphs... it would be nice to see all the sensor live data in one page
Could I use a OBDLink SX cable ? (j2534 but not sure about compatibility)
hi can we use any obd with this macchina are sold out also im running fedora whats best way to install the software
Hi mate , I've managed to drive my car over my obdstar x300m and ruined it .however the memory card which contains the software is intact . Is there a way that I can run the programs on a laptop or tablet ? 🤔 thanks.
Does it work on new mercedes models(like 2019 mercedes)?
can you show how gps will work. id like to get wifi to keep track of my work truck issue and where my trucks drove for snowplow
hi, can you tell me which OBD interface is best for MB W218 2010-2011? Or most can? Would like to do chip tuning etc. myself. I would also be happy about a software recommendation! :) Thank you!
Will tactrix open port 2.0 work with this?
Hello Rand I have downloaded your software on two of my PC that are running on Windows 7 on 64-bit and genuine on 32 bit but it seems like the program is on able to run could you provide some help please
It WAS a good idea. Seems like the project is dead now because there is no chance to buy adapters from macchina.
Does it work on mercedes c4 SD connect?
But if the obd reader used a correct can bus chipset then no programming would be necessary . You just have to get the right software.. is all in the software and parameters provrammed into the software that coincide with the vehicle’s as built code.. so you dont brick the ecu
Not working on w210. I'm using 38 pin connector to plug in a0. Everything's connected, and it's scanning for ISO-TP but can't read any errors. Just says that no ISU-TP capable ECUs were found in my vehicle. Any suggestions?
Yes it would never work on a car that old as it has no ECUs that can be diagnosed over CANBUS, only Kline (LIN)
@@RANDASH is there anything I can do to read them ECUs with my Macchina a0? Or should I order m2?
Hate to say this but pretty much the only thing you can do at this point is get a newer car....A0 doesn't and will never support LIN especially as it's a long dead protocol.
@@RANDASH What about M2? Any luck with K-Line implementation?
Can we use this on toyota ?
hope you got your degree... lol Congrats
is it possible to make a video explaining how to build a json schema for other brands ??? "I know theres a explanation doc"
that would make it real universal and my pcb order build diy ..
thx anyway for the open source
Someone make an open source android app or iOS app that uses the OBD2 Bluetooth adapters...
That looks way too complicated for most users, the ui is non-existent.
Well, beginners shouldnt really play with can data or vediamo hexstrings on their cars to be fair
🤔Holdup! Pretty much every item u suggested is proprietary. It seems like u’r pushing this company under the guise of being open sourced.
you have alot to say even though you dont say anything at all.
Excelent job!! We work with Trucks and machinery, please we apprecite if send us your email. Thanks in advance!