First Mod On Our 2022 Lowrider St - Vlog 16
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- #harleydavidson #thrashinsupply #lowriderst
Can we improve the ride on our 2022 Harley-Davidson's Lowrider ST? Today we did our first and most important upgrade, HANDLEBARS & RISERS! Follow along as we get to work...
Parts list used:
Thrashin Mid Bend Bars: www.thrashinsu...
Thrashin 9.5" Pull Back Risers:
www.thrashinsu...
Thrashin Bolt Grips: www.thrashinsu...
Thrashin Billet Perch Clamps: www.thrashinsu...
Gooden Tite Bushings: www.thrashinsu...
Guerrilla Cables used:
Speedo Harness 22 Inches part number 24080-1011
Control 6" Extension Harness part number 24020-1106
Throttle by wire 6" Extension Harness part number 24025 1606
Harley OE parts used:
Longer Front Brake Line part number 41800824
Brake Line Adapter 41600260
Extended Clutch Cable 37200216
Lance: “Hi I’m Juan and I’m on the trip✋” had me dying😂
I just seen it… had me going too😂
I "reverse bled" my Heritage when I did a bar swap. Used a meat injector syringe and pushed fluid from the caliper to master cylinder. Avoided any possibility of air in the ABS module and I didn't have to go to the dealership. Zero issues and super fast to do.
Would love to get some more details on how that's done exactly. I was at the dealership today and they said I absolutely HAD to go to them due to the abs. I'm on a 22' LRS
@@gbeatz408 I'll try and make a video on it here soon.
Thanks for posting that. I'm going to do 10 inch risers and that is my plan for the brake. Thanks for confirming it will work like I thought.
Learn from me. When I replaced my vans grips, I just cut the old vans grips off the throttle tube, slathered it in glue and put the new grips on, without removing the throttle tube first. I’m dumb and the throttle tube I had was open on the end… I glued my tbw twist sensor together solid. Take the tube off, glue it, let dry then install.
Man, you guys got it goin on for sure!. Bike looks sick with the risers amd new bar. You make some rad parts. Love watching the videos guys!. Awesome channel
Man I gotta get my hands on one of those brown Thrashin bags! I have the black but my bike NEEDS the brown 😂 Yall gonna make that color again???
Right now we don't have plans to but who knows! If we get enough hype, we might bring it back!
In the name of editing I get keeping ur vids short, but dang ya’ll.. I need to talk about pulling wires back through the new bars.. after four months back order I finally got the cruise control switchgear for my 2022 M8th St. Bob.
I only wanted to pull wires once!
I immediately put the order through Thrashin. New 6.5” pullbacks with their mid rise bars.
The CNC work that incorporates my stock electronic gauge is spot on🤙
I “think” the new bars are a 4 inch rise with a 25° sweep. This combo put me right back to factory ride height with the bars settling back just a lil. Super comfortable, and super slick looking. Back to the wiring son.. there is a reason your local Harley dealer charges three hours labor for this shit. Started out by pulling the fuel tank to gain access to the wire harness connectors toward the neck of the frame. Labeled all the wires,, disconnected and pulled them out. This was the easy part boys and girls. Purchased a new wire puller roll from my local hardware store and off to the races i went.
For the life of me I could not de-pin the fac connectors! I watched every freaking video on TH-cam on how to do it. I’ll admit I’m a dumb ass! My parents should not breed. I think I threw every wrench into the middle of the street pulling those freaking wires through those new bars! I’d rather have given birth through my asshole. In the end was the juice worth the squeeze? Hell yes! Will I ever pull wire again? Dude, I’d rather nail my own nuts to the top of a stool then do that shit again
@THRASHIN What size are the riser bolts you showed at 5:07? 1/2-13 x 2-1/4" ?
did you ever find out? lol I was looking too
Pretty sure its 1/2”x 13
Great videos y'all! I've taken some great ideas from y'all for my future build. Love the content.
Glad to hear it! Shoot us over some photos once you have it built up!
Can you guys give a little insight on how you bled the brakes with the ABS? Thank you
There is another great video that is a long day but you guys work so well together as I have said many times and your products are the best
Great video. I'm going with the exact same setup on my ST. Thanks for providing the part #s. They real took the guess work out for what I'll need as far as cables extensions and lines. Thanks from Canada eh!
I tried to use the part numbers and none of them work how did you find the cables?
Thanks for linking the wiring extensions. Helped me button up the last bits of my bar install! See you guys out on the road 🤙
Dude I've been watching your guys videos and just now realized i have some of your parts on my bike! Haha I have your risers on them that were installed on the bike when I bought it and they were part of the reason i bought it! Didnt even realize you guys made your own stuff till i saw the last video! Thanks! They are sick! Ive got the 22 low Rider st. Dude i have your grips and pegs too. So badass. Didnt know it was you guys. Totally gonna buy all my parts from you guys. I keep editing this and adding on 😂
Nice! Stoked your like them. Thanks for the support!
"Yeah you're smaller 😏" - Juan... lmfao the banter between yall is hilarious...
Thanks for showing us the installation process! How long are those grade 8 bolts? 2 1/2 inches? I'm about ready to start on the same installation, just waiting on the my HD dealer for the cables; but can't manage to find the length of the riser bolts.
Soo what size bolts did you need? is it these Grade 8 1/2 in.-13 x 2-1/2?
@@lemus92405 I ended up using grade 8, 1/2-13 x 2-3/4. With the bushings, the 2-1/2 seemed a little too short.
I tried typing in all the part numbers for the Harley OE parts on the Harley website and none of them are matching, how did you find the Harley OE parts?
I had the same issue with the handlebar position on my 2022 Lowrider S. Finally after months (getting the extended brake line for my non ABS bike wss a nightmare) I picked up the bike with the new bars today. No more pressure on my backing leaning forward but I'll have to rotate the bars a few degrees back to get them in the perfect position.
Juan is the man
Just watched it and you make my week, and can’t wait to see your Sturgis video and also 2lane. Cheers 🤙🇨🇦
Cool video . Loving the content. Needed this video like 2 yrs ago!! Awesome sharing the install🤘
Great video. I’ll be running these thrashin 9.5” on the ST. Thanks for the material list!
Completely inspired to get my handlebars done after this video!!! Buying the exact same setup as this club style is what I wanted and when I ride I feel a little forward as well on my FXLRST. Just didn't realize how good it really looked till seeing your bike done! Your how too's are definitely a favorite and love the gear on your site. Great gear, great vids, and keep it up!
It took my local Harley 4 days to install my 6.5 risers and high bend bars on my lowrider st
Juan where did the get the sleeving for the wires? really gives a great finished look - i assume its weatherproof and heat resistant ? what size sleeving did you use? did you use split or solid ? if you use solid the sleeving has to be big enough to fix the connectors through but not sure what size it would need to be? i see amazon sells lot of sleeping but none of the listings state they are water/weather proof but many people use it on cars and bikes.
Great video! Can you guys go over how you bled the brakes with the ABS?
Yes please! Figured this would have been discussed. Especially from these dudes.
what size bolts did you use for the risers??
Juan is the man! Great content
What size wire sheathing did you guys use?
I got this set up from you guys but 6.5 inch for my ST. Question, there are no directions, do I use the stock riser bolts, or the ones that you guys used? I know they are 1/2 13 but it does not say how long they are on the video. Also, do I need washers if I use the bolts I get from the hardware store? I just want the parts in front of me before I pull the stock set-up off. Thank you and thanks for such a great product and great videos.
Great you showed the new grips as I am just looking for new ones
What’s the length of the extended brake line?
Does anyone know which riser bolts were used? The size and spec?
Pretty sure its 1/2”x 13
I’m also staying in Deadwood for the Rally and will be looking for you guys to buy you a round. I enjoy your videos. Ride safe
Can’t wait to get to Sturgis ✌️, another great video and that bar set up is rad 🤟
Just got my risers and about to install them! I got all the parts you listed but I was wondering what size bolts did you use to replace the studs? Do you also sell those?
Maaaan nothin better than a bedtime doobie & a thrashin vid much love
Honestly I've got the 6.5 risers, cause they worked with stock cables and it helped a ton. But I'm highly considering going up to the 9.5s to bring it just a little higher and closer. Definitely putting a mid bend bar on here soon too.
How tall are you bro? Gathering data for myself 😂
I got 6in risers chillin, still working on the bars
I'm 6ft 1. I recently road 600 miles on these 6.5 pullbacks and it was good, little sore in the lower back, still a little stretched when I lean back in my seat on the highway. I do gotta lean a bit forward for slow speed, bar turn stuff. I think the mid bend bar will help a bit more. Gonna try that first.
Did you reuse the stock riser bolts?
Definitely want a better handlebar setup so seeing all the “how too’s” helps me remember things Like cables and extra bolts in case Juan doesn’t double check my tightening skills.
LOL took them all that time to end up with Chicken and Broccoli? ... Bike looks rad with those handlebars! I'm new to your channel and brand. Definitely top notch stuff here!
Stop at resort in the middle of spearfish cannon. Around back is a dirt road take it back about a mile or so there is a awesome waterfall.
awesome vlog ... hope to see you guys in Sturgis coming up from south FL
Great vid, use the same risers on my 22 lowrider s....used stock bars though, next time I ride it I'm going to be wondering about that bend you were explaining! Dammit! lol! And it took me 4-4 1/2hrs to do mine...alot longer but did it with the bluetick's (Hank) help in the garage lol Sláinte!
Look at old folks with The night lights had me dying…
What did you guys use for wrapping the wires? What kind of sheath is that?
Thanks for the parts list below 👍🏻
I know this question been asked a few times, but what sleeving did you use to secure all the wiring?
Are these mid controls or forward?? 👀👀
Wonder how you will feel when you put on a different seat… too high or too close is my concern.
Looks like a great time. I’m looking forward to watching the Sturgis videos with you all together.
Awesome video I put the aggressive bend and I’m not happy but the good news is they will be easy to swap for the mid bend
Ok these are great mod.I just had thrashin 9.5 risers and their mid bars install on my 22 lowrider st. I am 5' 9" . They are literally perfect ergo reach etc.I never like to get to excited cause big disappointed. However these take your bike to all day riding in comfort. Yes expensive but WAY worth if keeping bike.
Just ordered the same grips, so I shouldn't need a throttle tube for a 24 LRS?
What size clutch cable and front break line
I ordered the Thrashin throttle tube Billet (throttle by wire) 59.95, I have this same exact bike . Is that the tube I need? Because I saw a different one right after I purchased it
The Billet Throttle Tube works! We hadn't developed it yet when we released this video but that is the correct fitment you will need
@@THRASHIN sweet thank you for the quick reply
Cant wait, buying some gear from you guys in the near future. Love your vids, love your work!
Edit: Your dad looks like my Barber
Awesome! You guys always make my day🤜🏻⚡🤛🏻
How did you angle that brake line adapter elbow under the triple tree ? Can I get a picture somehow ? Please
How did you avoid the dealership for an ABS bleed with their software ?
Very interested in figure this out also.
Been waiting a month for brake line cable for my 9.5 risers and aggressive mid bend bars
Markets hot right now, a lot of people trying to get bikes ready. You can always reach out to other vendors for a brake like. Galfer makes custom lines, and there are plenty of brands in the Drag Catalog 👍🏻
@@THRASHIN I appreciate the info . I bought the bike April 15th and it’s still at dealer waiting on that one line. It did give me plenty time order all thrashin parts I could get for this bike lol
@@dennisshoot5698 I tried typing in all the part numbers for the Harley OE parts on the Harley website and none of them are matching, how did you find the Harley OE parts?
Just ordered everything in your parts list, what sheath did you guys use for the wiring coming out of the gauge and bars heading down? I can’t stand loose wires and I’m putting your risers on a El Diablo so I really want it clean
Was able to pick one up but still breaking it in I’m curious on if it will get that front end up stock I gotta still do risers and bars myself will def check your gear out when I get the funds 🤙🏻 thanks for all the content much love and positive vibes brother
Juan deserves a raise
15:21 where did you guys source that sleeving for the cables?
So i'm gonna do that install on my 2022 low rider ST. Is there anything else beside what's in the description that i need ?
yea dudes!! Good times 🤘
Bro when do we get grips for our bikes
This month 🔥🙌🏻
Dope! Wish there was a pre-order
@@THRASHIN just ordered me some red ones!!!!!
My 6.5" pull back risers are scheduled to arrive tomorrow. I have the same question several others have posted (I didn't see an answer). Need specs on the Grade 8 bolt size. 1/2" 13 thread, but how long? 3", 2.5", other? I've spent way too much time looking for these specs...
I feel the same about the stock bars. I am told that if I use the your Mid Bend Bar with your 6.5 riser, I do not have to use cable extensions. Does that sound right to you?
Hey y’all!! My 9.5 inch risers are coming in 2-3 days I’m so stoked. I’m putting them on my 2022 streetbob but don’t know which riser bolts to use, which do you guys recommend? You showed them in the video but didn’t say what brand
Setup looks so good!
When installing the throttle tube you put grip glue on the throttle tube then put the grips on correct?
It’s tomato tomato…. As long as a little glue gets on the whole grip to glue her down. But not too much glue lol. Just spin the grip around a couple times to spread it out 👍🏻
Big juan babay!!! Keep the vlogs coming!
How is the comfort now of the bike with the risers/bars? Is the bike now overall, comfortable enough to ride to Sturgis, or are you gonna ride the RG? Oh, and how’s that klockwerks windshield compared to stock?
Do you guys ever sell scratch and dent risers. I love your product unfortunately I have too many kids at home to purchase to go on my brand new Lowrider ST
ST looking 🔥
Hey Guys.
That's was Great Bike is looking Good and Heaps of Laughs...
🤙🇦🇺🤙
What length 1/2" x 13 bolts did you use?
I forget, but I think 2.5” long. Maybe 2-3/4”. But you can just match to stock.
Always get grade 8 or higher
@@THRASHIN appreciate it!
@@YeUnholyFiend what size did you end up going with?
the engineer who swaps his hat, is the engineer i want on my team
What bolts did you use for securing the risers? I don’t see it in your parts list. Thanks!
Dope video! How much slack was in your cables when finished? I'm looking to do a 10in riser with 1in pullback on my 2022 FXLRS. Wondering if I can order the same exact cable setup or do I need to go one size up?
Will the grips and bar bag color match the dark brown saddlemen seat?
It’s close…
Any tips or even a video on the brake bleeding part of it?? Can’t seem to find a proper video anywhere.
If you’re gonna do some work on your bike, please, invest in service manual. You’ll be glad you did.
What length bolts do I need for the risers ?
Can’t wait for my giant order to arrive tomorrow.
Bars Look awesome love the grips I have a 2019 CVO RG Will your grips come in red that matches the red on my bike?
Where did you get the sheathing from to wrap the cables
Love these vids!
Can you guys show how you put the throttle side grip on? With the throttle by wire sleeve
Use a less amount of glue, and sometimes it helps to put that grip on the throttle tube off the bike. Let it dry, and install the throttle tube. I’m sure there are plenty of videos on TH-cam already of how to install grips on throttle tube. We may have it in a video soon. Just wanted to help in the meantime 🤘🏻
how do you like Klock Werks Flare™ Windshield?
Support from Sweden 🤘🏼🇸🇪🇸🇪
I reverse bleed my mountain bikes I guess I'll do the same to my st when I change to these risers
Needs a brown Saddlemen Step-Up seat with a gold Thrashin logo embroidered.
Any coupon codes or Black Friday deals on any of the TSC parts?
Oohhh I’m bouta get some of dem gripy grips
How is that KlockWerks windshield?
I got the 6.5" risers with the mid bend and looking at this, should've went bigger.
Could always go to high bend bars or use our riser spacers 🤘🏻
This vs a streetglide or RG spec??? Which one overall
I needed this video
Anybody know the length of the front upper brake line used for this set up..?
I searched for the part # that they used but can’t find one in stock anywhere..
Why did you change out your stock bolt under the risers? Stronger grade?
Honestly just a habit
@@THRASHIN what length and grade were those riser bolts I’m installing thrashing risers and bars this week
Your videos are so awesome