Viega Manabloc Leaking | valve replacement | fix affordably
ฝัง
- เผยแพร่เมื่อ 17 ก.ย. 2024
- Replacement tool, key and valves: amzn.to/2W3UBMg
In this video we will be showing you how you can replace your manabloc valve to stop it from leaking.
Hope you enjoy the video and if you do remember to like and subscribe.
very helpful, i have the newer version of this manafold. i wish you video was stable for clear pics of your awsome work.
I've got an identical Vanguard/Manabloc manifold and am planning to do the same valve replacement/upgrade since my old ones just don't want to turn with those old flimsy stems. Thanks for posting this video, gives me a bit more confidence in doing it myself.
Good luck!
Thanks for this video! I had this exact same problem and your video saved me some $$!
Wish you could have just shown removing that valve. There has to be a good video somewhere of just that.
I changed the valve and leak has stopped. Worked great. I just had one issue. I couldn't really figure out the removal tool. I really didn't get it. I eventually was able to pop it out with some work. But definitely wasn't as smooth as your's and other videos were.
Great video, viega customer service is top notch! You may want to get someone to look at that venting on the heaters, looks sketch. I would at least make sure you have a CO detector down there.
Yeah I used to be a contractor and build/ repair houses and that was illegal in the Midwest. Then I moved to Utah and saw this and was shocked that almost every house is like that. I did end up changing it a few weeks after this was filmed and got a new heater.
exactly what I needed to know thanks much....
I just moved into a house with one of these systems. I'm looking to get one of those garden hose adapters so I can drain it. What are the details on the one you have here @5:16 /what should I be looking for? Sorry, I'm new to this plumbing thing
THANK YOU!
as much as that block cost, no one should have issues. I'm sticking to the copper manifold
Yeah I would too but it came with the house and the customer service was great.
Where does the line from the bottom of the manibloc go?
Water heater isn’t properly vented?
My kitchen hot water completely stop for 5 to 10 minutes for no reason (2 faucets same problem), is the Qickport ball valve can be loose and turn on itself??
Never understood the point of these things.I'd throw the hole thing in the trash and just build a manifold out of tees. Having hot flow next to cold, all the seals and expansion contraction, only a matter of time till it leaks again. Great vid though.
Yeah I agree, but it came with the house. If I had to buy me I would just build it myself out of copper. Anyways vanguard/ Vega costumer support was very friendly and good to work with.
They no longer provide the replacement valves, you have to order them yourselves.
Too much zooming in and out of focus was super distracting
You sound confusing, too much going on.
Thanks for letting us know, we will try to work on that.