How to Perform Oil Change 14-17 Subaru Crosstrek
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- For More Info visit us at: 1aau.to/h/bW/
In the video, 1A Auto shows how to drain, change, and fill your old or dirty oil and oil filter.
The video is applicable to the 14 Subaru Crosstrek
This process should be similar on the following vehicles:
2013 Subaru XV Crosstrek
2014 Subaru XV Crosstrek
2015 Subaru XV Crosstrek
🔧 List of tools used:
• 17mm Socket 1aau.to/obj/1AX...
• Ratchet 1aau.to/obK/1AX...
• Socket Extensions 1aau.to/obj/1AX...
• Cloth Rags 1aau.to/oD/1AXS...
• Engine Oil
• Paper Towels 1aau.to/oD/1AXS...
• Drain Pan 1aau.to/oA/1AXA...
• Floor Jack 1aau.to/oZ/1AXA...
• Jack Stands 1aau.to/oZ/1AXA...
Subscribe: / @1aauto
Check out our playlist:
Subaru Repair videos from 1AAuto.com: • Subaru Repair videos f...
Subaru Crosstrek 2014-2017 1st Gen: • Subaru Crosstrek 2014-...
For More Info visit us at 1aau.to/h/bW/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
![[ TEASER ] เงาะป่า - วงL.กฮ. | TMG RECORD](http://i.ytimg.com/vi/M4ObdFfcPww/mqdefault.jpg)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Done two oil changes on my 2014 Subaru XV by watching this, you guys are the absolute best
Dang, an oil filter that is easily accessible? That's awesome.
thank you for actually saying the box wrench size, I was pulling my hair out when none of my sockets fit. Made picking out the right wrench way easier.
I ALWAYS START my Cars and Trucks and Motorcycles to Check for leaks after an Oil and Filter change.
Then if no leaks I check the oil level mainly because New Oil fills the New Filter when started so I get a more accurate reading of the Oil Level.
Very concise and informative. Thank you so much.
17mm 10-4! awesome sauce
Loosen the oil filter so it drains back into the pan before you remove oil drain nut. As another commenter said, loosen the oil fill cover too.
+Scott Rossillo Thanks for checking us out!
how do we do this at home? Do I just need a nice jack to jack my cross trek up?
The easiest oil change job ever
You are the man thanks a lot
I did empty the big pan the first time 😢
So well done - thank you so much!
Which direction does the drain plug crush gasket go on (flat side against the pan or the plug)?
Flat side against the plug. Round side against the pan
I noticed you put 5 quarts in even though it calls for 5.1. Is it ok to just not put in the .01?
Far better to have too little oil than too much. None of my vehicles burn oil so I always leave about .01 out. Just check your dip stick and you’ll be fine.
On my 2017 Crosstrek the oil drain bolt is 14mm. I should have taken a picture. Also, there’s enough room to get in there with a socket wrench.
+Scott Rossillo Thanks for checking us out!
14mm for my 2021 Legacy Premium with the 2.5L
Do you ever pre fill the filter or prime the system to get oil pressure before starting the vehicle?
70 porn background music! AWKWARD! VERY GOOD AND INFORMATIVE VIDEO!
+@aramos9241 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Would this video/how-to be applicable to a 2016 2.5L Outback?
Thank you
For Crosstrek 2015, do you recommend 0w20 synthetic or 5w30 synthetic? The cap says 0w20, but the manual says 5w30. Also, is there any harm in choosing a brand outside of subaru for oil filter, do you happen to have a recommendation? Thanks!
+Indira S I would put in whichever oil the cap has on it. If you are unsure of what your vehicle calls for please contact your local dealership with your VIN, and they should be able to help. You can use whichever brand oil filter as long as it is the correct fit! 1aauto.com
A couple years back I called up Subaru which weights of oil are ok to run in the engine, anything from 0W-20 up to 10W-40 is fine. I use 5W-30 because it's the most common and cheapest weight. Only other requirements to the oil are API SN RC or ILSAC GF-5 or ACEA A3 or A5.
Oil filter brand doesn't matter, just use one from a reputable brand like Hengst, Mann, Fram, DC etc.
But what about the .1 quarts!??!?!
where did you get the aftermarket parts for the car? I really want the oil cap and battery hold down
+Dave Goldstein Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
At 2:46 it sounds like you said you used a new gasket when reinstalling the drain plug. Is that critical? If so, is it a generic gasket or something oil-pan-/ Subaru-/ Crosstrek-specific? Thanks.
+ssilk Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I'm using synthetic oil in our crosstrek and would like to change the filter only at 3k miles...any suggestions, on how not to make a huge mess? Can I tap a small drain hole on top of the oil filter to allow the oil drain down out of the filter?
@jetli_notme just remove filter, it does not make that much of a mess.
Man quit overtightening the oil filter! Half a turn after contact 3/4 at the most
You don't need to remove the lower splash shield because you have the luxury of raising the vehicle...
Thanks a lot!!!!!