ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
nice hack. But why not replace the optocoupler ?Thanks!
I think the problem is optocoupler's led side. optocoupler is not broken. So this is a practical sollution.
没根本解决问题
Nice explanatiuon. i thoght was the crazy t-con and it's the led power measured on tiodes on psu that is gone.
I think the problem is optocoupler's led side. optocoupler is not broken. So this is a practical sollution. Thanks.
Thanks.....greate work.....have a good times
Thank you master
I have the same problem on the sony KDL32EX521, which is the fault, do you know the board is GE2
Nice job 👍 thanks
JOB WELL DONE..
Cześć mój telewizor to dony kdl 40 ex 720 . Nie startuje podświetlenie. Zapala się tylko dioda czerwona i miga 5 razy . Obraz czarny . Nieraz zapali się zielona a za chwilę czerwona i miga 5 razy i obrazu brak . Czarny ekran. Pomożesz mi ?
Nice sharing
does hdmi port can get replaced of this tv.?
Pershendetje! Perse vendose nje Rezistence ne vend te Optociftuesit? Mund te na e thuash perse kjo zgjidhje? Faleminderit!
他不负责任,其它地方有故障引起保护关机。
Chock gazal aabi..
Ottimo lavoro
thenks.
i have the same tv with same problem but stand by blink two times
BRAVO LIKE
Good solution
How did you know that optocupler 817 is not ok?
Watching...🙂🙂🙂
Bravo yesssssssssssss
How did you choose the resistance value?
That means the optocoupler is always on.
How did you identify the optocoupler is faculty
if the output voltage is not stable suspect optocoupler on any smps
The only thing i understand is OK, i dont understand anything else he says. Does anyone here understand what he says? :D
What happen sir if you replace the opto coupler?but any way good job sir.
maybe feedback to opto. not working correctly, soldering direct not need opto for power supply to inverter
My TV sem problem Sonny Bravia 46 Inch
👍👍👍
was the optocoupler bad?
It can be bad , but i just feel it is ok .
@@dragobv nice work
Good
wow😍😘👍
👍👌👍
Wear you from
how do you detect the fault, do you have tv schmatic
probably the problem is known
Hii
Watching ED TECH PH
Pwde palang UN master tanggalin ung feedback Nya tapos replace to low resistance
Chokane.akhi.karimi.aala.majhoudatika.lahe.isahale.aalike..aandi.sony.bravia.kdl37.ex402.7alayta.walite.sadaytha.vise.t9abha.9alabte.fi.madinati.machraa.bele.ksiri.wa.souke.arbiaae.wa.ksare.lakbire.lame.ajidha..mahiya.romplason..choukane
nice hack. But why not replace the optocoupler ?
Thanks!
I think the problem is optocoupler's led side. optocoupler is not broken. So this is a practical sollution.
没根本解决问题
Nice explanatiuon. i thoght was the crazy t-con and it's the led power measured on tiodes on psu that is gone.
I think the problem is optocoupler's led side. optocoupler is not broken. So this is a practical sollution. Thanks.
Thanks.....greate work.....have a good times
Thank you master
I have the same problem on the sony KDL32EX521, which is the fault, do you know the board is GE2
Nice job 👍 thanks
JOB WELL DONE..
Cześć mój telewizor to dony kdl 40 ex 720 . Nie startuje podświetlenie. Zapala się tylko dioda czerwona i miga 5 razy . Obraz czarny . Nieraz zapali się zielona a za chwilę czerwona i miga 5 razy i obrazu brak . Czarny ekran. Pomożesz mi ?
Nice sharing
does hdmi port can get replaced of this tv.?
Pershendetje! Perse vendose nje Rezistence ne vend te Optociftuesit? Mund te na e thuash perse kjo zgjidhje? Faleminderit!
他不负责任,其它地方有故障引起保护关机。
Chock gazal aabi..
Ottimo lavoro
thenks.
i have the same tv with same problem but stand by blink two times
BRAVO LIKE
Good solution
How did you know that optocupler 817 is not ok?
Watching...🙂🙂🙂
Bravo yesssssssssssss
How did you choose the resistance value?
That means the optocoupler is always on.
How did you identify the optocoupler is faculty
if the output voltage is not stable suspect optocoupler on any smps
The only thing i understand is OK, i dont understand anything else he says. Does anyone here understand what he says? :D
What happen sir if you replace the opto coupler?but any way good job sir.
maybe feedback to opto. not working correctly, soldering direct not need opto for power supply to inverter
I think the problem is optocoupler's led side. optocoupler is not broken. So this is a practical sollution.
My TV sem problem Sonny Bravia 46 Inch
👍👍👍
was the optocoupler bad?
It can be bad , but i just feel it is ok .
@@dragobv nice work
I think the problem is optocoupler's led side. optocoupler is not broken. So this is a practical sollution.
Good
wow😍😘👍
👍👌👍
Wear you from
how do you detect the fault, do you have tv schmatic
probably the problem is known
Hii
Watching ED TECH PH
Pwde palang UN master tanggalin ung feedback Nya tapos replace to low resistance
Chokane.akhi.karimi.aala.majhoudatika.lahe.isahale.aalike..aandi.sony.bravia.kdl37.ex402.7alayta.walite.sadaytha.vise.t9abha.9alabte.fi.madinati.machraa.bele.ksiri.wa.souke.arbiaae.wa.ksare.lakbire.lame.ajidha..mahiya.romplason..choukane
Chokane.akhi.karimi.aala.majhoudatika.lahe.isahale.aalike..aandi.sony.bravia.kdl37.ex402.7alayta.walite.sadaytha.vise.t9abha.9alabte.fi.madinati.machraa.bele.ksiri.wa.souke.arbiaae.wa.ksare.lakbire.lame.ajidha..mahiya.romplason..choukane