This is the only channel I've ever watched where everything is done the right way.. It's like an art work! Much respect for the pride you take in your craftsmanship as this separates the men from the boys.. You got a new subscriber
@AKI u know what would b awesome? If you swapped in the DSG GTI transmission so you can shift with paddles 👍 that way you could keep both hands on the wheel.
Love how y’all break each vlog into one thing .. so Many things I learned from y’all and can’t find it in past videos .. but now dedicated to one thing is 🔥🔥🔥🔥
Love you guys! Passing out gems....ALL DAY, E'RY DAY! The 5/16" to -6AN adapter is the correct size. The OEM fuel lines have a coating on them that has to be sanded/scraped/removed so that the compression ferrule will fit and properly seal the fitting. You won't see a leak until that fuel line and chassis flexes a bit. #keepgunnin
Super salty right now. I just got my full brake line kit from valex racing. Was a little less money, but I would much rather have this kit. I was wanting the lines to be black. Super clean install. Nice job guys.
Thank you Aki you couldnt emphasize that any better 7:20 🙏🏼🔫🔫🔫🔫🔫 and great job as always 👏🏼 keepgunnin btw 52:14 super funny 😂😂😂 that k series got him daydreaming 🤣🤣🤣🤣
Every keep gunnin video that pops up has been a huge inspiration, even though I haven't been able to watch any of the series yet. Time to go start from the beginning 🧑🔧🥳
Answer to your oil cooler I wouldnt worry about it as it would be pressurized. BUT! If you're really worried unbolt the cooler and put it on the floor and prime the whole oil system (so the cooler feed is higher than the cooler itself) it should bleed the air bubbles IF ANY through. KEEP GUNNIN!
I got my brake tuck from stash auto.. yes it took long… i ordered it with a BB delete and afterwards i decided to go back to a brake booster and asked him if he could sell me just those lines separately and he would not accept my money and made the lines and shipped them to me at no cost. Yes it took a while but I wasn’t in a rush I’m very happy with the product and wouldn’t say you led me in a bad path. Keep Gunnin 🔫🔫🔫🔫
Yerrrrr. TYPE R FOR THE WIN I HAVE THE SAME ONE 2019 SAME COLOR TOO. BEST COLOR THEY MADE. Why was Gunner RED just staring at the motor like that haha 🤣 KEEP GUNNIN..
That 1” BMC upgrade is a excellent upgrade for those road racing and daily drivers that don’t have the budget BBK. More stopping power with a lot less pedal travel. Loving this build. Not going lie, This is better than lefty in my opinion. Love the channel. 🔫🌎
hey aki n chappy great work with all the vlogs and detailed info, keep up thw good work, big up to all the gunners, am from the caribbean, Antigua to be exact. am building a JDM CL9 TSX race car, any idea wher e i can get a RHD manual harness.
Trust I love the movement that I'm apart of. It's jus discouraging to see sumn done that I wish I could be doing. I have an Japanese integra and been up n down and have been taken advantage of. I won't give up but it is what is.
Ehh Aki, I think by having the fittings facing down, the oil cooler isn't being used to its full potential . At least if the fittings are on top, you'll know that you're getting the maximum amount of oil inside the cooler before it returns to the motor. Just some food for thought.
gunners report! also ur doin oil draina in those lines as well as the cooler itself... what is gonna be hard about removing it from the mount and undoing both fittings at that point? initial cracking loose while mountes ofc. man just throw a little bracket so it mounts right
Was really looking forward to using stash’s parts! Design’s were awesome. No matter what happened with my parts. Hope bro’s is safe and prosperous in his endeavors! Finishing line here we come ✌🏽❤️🔫🔫🔫
Hey yo any1 ever try doing the 240sx master cylinder with the prop valve built-in... I kno it fits the booster perfectly and works but I'm trying to figure out if yu would use the isr 240 lines or what lines
Any info would help as far as any1 knos and I kno Jimmy Oakes used it on nassonda but he used 240 calipers.. I'm trying to use gsr calipers!!!also can yu use v.w. carrado rotors with gsr calipers
Morning Gunners, time to try to close the gap with my lil integ, hopefully I can hit the circuit this spring in VA lmk whenever you’re close by to get the touge smoke🔫🔫😈keep up the hustle
Bro your a great person and I see and believe in your vision, Stash Auto messed up big time because he really do have the best brake tuck kit😭 I just took my money back and will go elsewhere 😔
Are you using PTFE fuel line? PS. I like your wisdom comment on "dont wait for that pat on the back" make it happen. Many dont understand that our cars are a very individual sport/hobby. If your in it to gain attention or approval from others your in it for the wrong reason. Its about self accomplishment and to make a personal dream a reality. You must be dedicated, self motivated and have a good amount of self discipline like Aki has. There is so much more to Aki's videos then just receiving parts and bolting them on. Pay attention to what Aki says. There's so much more to it.
Men I learned alot from watching your videos. You're a mentor and role model. Keep gunning bro
This is the only channel I've ever watched where everything is done the right way.. It's like an art work! Much respect for the pride you take in your craftsmanship as this separates the men from the boys.. You got a new subscriber
Nothing gets me more hype than a new vlog. Great way to start the day. Sending Positivity and Wishing Blessings on everyone here 🔫🔫🔫
Facts 🚦🚦
Legend has it that polorbear only drinks Pepsi now.
@AKI
u know what would b awesome? If you swapped in the DSG GTI transmission so you can shift with paddles 👍 that way you could keep both hands on the wheel.
14:57 real talk tho
Aki and trappy buckets!!!
(Honda scene) name a better duo!?! OMM
Camera work was on point 👌
Love how y’all break each vlog into one thing .. so
Many things I learned from y’all and can’t find it in past videos .. but now dedicated to one thing is 🔥🔥🔥🔥
Love you guys! Passing out gems....ALL DAY, E'RY DAY!
The 5/16" to -6AN adapter is the correct size. The OEM fuel lines have a coating on them that has to be sanded/scraped/removed so that the compression ferrule will fit and properly seal the fitting. You won't see a leak until that fuel line and chassis flexes a bit.
#keepgunnin
Bash bros Killin it. No one can compare to you both.
Finishing lines is good, and have GREAT customer service I got my shifter plate for my staging brake by him . 🤙🏼
Trappy killed it with the cam skills
Trappy Buckets killin it with the camera work!
Trappy killed it with the in the bay shots not gonna lie
You killed it trap no cap😂
Let us remember. Trappppyyy killing it with the camera skills! Keep gunnin!
Super salty right now. I just got my full brake line kit from valex racing. Was a little less money, but I would much rather have this kit. I was wanting the lines to be black. Super clean install. Nice job guys.
Pepsi and a cigarette!!! Lol dead🤣🤣🤣🤣🔫🔫🔫🔫🐋🍣 twice on a tuesday. Keep Gunnin!!!🔥🔥🔥
Thank you Aki you couldnt emphasize that any better 7:20 🙏🏼🔫🔫🔫🔫🔫 and great job as always 👏🏼 keepgunnin btw 52:14 super funny 😂😂😂 that k series got him daydreaming 🤣🤣🤣🤣
Trappy stay killin it with the camera angles the best camera man 🔫🔫🔫
Finishing lines for the win! I have a set of my hatch! Amazing products and amazing customer service!
Zooming in on dude mesmerized on that motor while trappy was yappy is the best part of the video 🤣😂
21:00 literally me every time I work on my car 🤣🤣
Hey man im here watching learning from all you guys , i love those EK’s
Can't wait to get back up n going on my build now 🙌
23:55 PAUSE ON SENDING THE BULKHEAD THRU OG 🤣🤣🤣🤣
Trapp .. .camera man of the year award 👏 🙌. .LoL🔫🔫
Black fish is in season off LI.
This was one of the realest video I seen on you tube. You kept everything 100 no🧢 straight facts. Thanks Ambassador
The last two minutes of the video 🔥🔥🔥
Trapp definitely killed it with the visuals *pause*
Every keep gunnin video that pops up has been a huge inspiration, even though I haven't been able to watch any of the series yet. Time to go start from the beginning 🧑🔧🥳
Nothing but knowledge fellas.
Hella glad I found this channel not gonna lie
Looking like winter is starting early.
20:00 trappy killing the b-roll 😂⚰️
You guys do great stuff! Only thing that gets me is if it ever needs servicing you'll have to take the dash back out. Otherwise tuck clean af!
U should run the 4pistons motor to break it in on the track 👍
TRAPPP U KILLED IT WIT THE CAMERA
Keep up the hard work
Answer to your oil cooler I wouldnt worry about it as it would be pressurized. BUT! If you're really worried unbolt the cooler and put it on the floor and prime the whole oil system (so the cooler feed is higher than the cooler itself) it should bleed the air bubbles IF ANY through. KEEP GUNNIN!
Nice vid, made me buy the drill and punch set right away :)
The polar bear story sent me 😂😂 aki said that mad serious n everything
Y’all need a show on MT
I got my brake tuck from stash auto.. yes it took long… i ordered it with a BB delete and afterwards i decided to go back to a brake booster and asked him if he could sell me just those lines separately and he would not accept my money and made the lines and shipped them to me at no cost. Yes it took a while but I wasn’t in a rush I’m very happy with the product and wouldn’t say you led me in a bad path. Keep Gunnin 🔫🔫🔫🔫
Come to Florida, need some help on my wiring on my build
No 🧢. Everything from Finishing Lines is quality!
Wowwww cant even have us along for the first start up ‼️😂 Great work aki love the channel 🖤🔫💯💯 #KEEPGUNNIN
nice Vlog aki & trap pause on the “run it threw” TRAP ! lol keep doing yall thing man KEEP GUNNIN MANG !!!!
Yerrrrr. TYPE R FOR THE WIN I HAVE THE SAME ONE 2019 SAME COLOR TOO. BEST COLOR THEY MADE. Why was Gunner RED just staring at the motor like that haha 🤣 KEEP GUNNIN..
🤣🤣🤣
That 1” BMC upgrade is a excellent upgrade for those road racing and daily drivers that don’t have the budget BBK. More stopping power with a lot less pedal travel. Loving this build. Not going lie, This is better than lefty in my opinion. Love the channel. 🔫🌎
Legends in the making 🔫 pow !
Clean cuts
hey aki n chappy great work with all the vlogs and detailed info, keep up thw good work, big up to all the gunners, am from the caribbean, Antigua to be exact. am building a JDM CL9 TSX race car, any idea wher e i can get a RHD manual harness.
That’s BRAKE LINE TUCK IS FIREEEEE 🔫🔫🔥🔥🔥 Can’t wait for this build to really see that TRACK ITS GONNA BE A KILLER 🔫🔫🔥🔥💪🏼💪🏼
10:20 wym I push down on my clutch pedal to the floor all the time. Idek i could push half way
Trust I love the movement that I'm apart of. It's jus discouraging to see sumn done that I wish I could be doing. I have an Japanese integra and been up n down and have been taken advantage of. I won't give up but it is what is.
No Teflon on the bulk head fitting to keep water out or do you plan on undercoating it for that
I may have missed what are you guys running for the power steering?
Question no stainless steel brake lines?
Hi whats the little hole on the brake line end fitting for?
You KILLIN it Trapp 🤣
Which fuel pressure gauge you guys using with your pressure regulator
The skills and knowledge is top tier 🙌🏽
No I run my the same way no problem at all
Do you need to order the proportions valve separate or does it come with the kit?
Ehh Aki, I think by having the fittings facing down, the oil cooler isn't being used to its full potential . At least if the fittings are on top, you'll know that you're getting the maximum amount of oil inside the cooler before it returns to the motor. Just some food for thought.
gunners report! also ur doin oil draina in those lines as well as the cooler itself... what is gonna be hard about removing it from the mount and undoing both fittings at that point? initial cracking loose while mountes ofc. man just throw a little bracket so it mounts right
HEY JUST A QUESTION WHY DO U ONLY GO HALF WAY ON THE CLUTCH PEDAL I ALWAYS GO ALL THE WAY DOWN
Always best vlog
Great morning family, loving the vlog series on #manolo love to see y’all kicking ass and getting it done. 🔫🔫❤️❤️
Yoooo I’m dying rn. How u zoom in on GunnerRed just staring at that New K from 4Piston 😂😂😂
YOU GONNA DO US LIKE THA?!?! HOW YOU GONNA DO US LIKE THA?!?!?! NOT LET US KNOW WHATS IN THE BOX!!!! 🤣🤣🤣🤣 The gooooood olll' CLIFFHANGER!!!
🏁
💪🏼💥 éxito bro espero algún día montar un serie k en mi civic domani 🔥 el mejor sonido serie k ...
Next car giveaway should be a track built car like this one 👍 🔥 💪 🔫
Always droppin gems 🙌🏼
Quick question why don’t you guys use ptfe fuel line when running e85 ?
Why no washers on the bulkhead?
Was really looking forward to using stash’s parts! Design’s were awesome. No matter what happened with my parts. Hope bro’s is safe and prosperous in his endeavors! Finishing line here we come ✌🏽❤️🔫🔫🔫
Gunnin Wisconsin
💪
Yah boy.
Nah trap got the Peter Parker fingers with that camera 🔥🗣
I like the “ I like to do shit on Tuesdays.” Joke.
@keepgunnin i need to get some new E brake cables for my hatch ..(with rear discs)...can u share a part number or seller ...thanks
Nobody gonna say it so I will the most underrated part of this vlog is the lighting ✋🏼⬇️
Are those REV9 mounts??
🤣🤣🤣🤣 “Pause”
Hey yo any1 ever try doing the 240sx master cylinder with the prop valve built-in... I kno it fits the booster perfectly and works but I'm trying to figure out if yu would use the isr 240 lines or what lines
Any info would help as far as any1 knos and I kno Jimmy Oakes used it on nassonda but he used 240 calipers.. I'm trying to use gsr calipers!!!also can yu use v.w. carrado rotors with gsr calipers
Trappy buckets with the creeping shot lmfaoo pause
Where can I get the gold heat tape
KEEP GUNNIN 🔫💯
The bash bros never disappoint man , 2:40 am right after work just rolled a FAT blunt ready to learn 🙏🏽🔫🔫
Trappy with the angles tho!
🤣🤣🤣🤣 trappy killin it in the 📷 💪💪 keep gunnin 🔫
Morning Gunners, time to try to close the gap with my lil integ, hopefully I can hit the circuit this spring in VA lmk whenever you’re close by to get the touge smoke🔫🔫😈keep up the hustle
Got my kit from them last week got it Monday night 🙌 man thanks for the step by step I'm a fucking pro now 💪💪 #keepgunnin
i’m a 8th gen gunner we oushideee😈💪🏽
Make we wanna call in and work on the coupe today
Bro your a great person and I see and believe in your vision, Stash Auto messed up big time because he really do have the best brake tuck kit😭 I just took my money back and will go elsewhere 😔
Are you using PTFE fuel line? PS. I like your wisdom comment on "dont wait for that pat on the back" make it happen. Many dont understand that our cars are a very individual sport/hobby. If your in it to gain attention or approval from others your in it for the wrong reason. Its about self accomplishment and to make a personal dream a reality. You must be dedicated, self motivated and have a good amount of self discipline like Aki has. There is so much more to Aki's videos then just receiving parts and bolting them on. Pay attention to what Aki says. There's so much more to it.
I want to see you do a k awd car....
The did it with Lefty!!