Personally, I agree. While making things is fun sometimes, just buying all the material would quite likely be more expensive (by the time postage is included) One thing I have considered though is the belt sander. A good narrow belt handheld is crazy expensive (between $600 ~$1000 with ability to do round, odd curves or fillets) For flat or nose radii they are cheap enough but 'slack belt' gets very expensive (way more than I would pay for limited time it's actually needed)
This is not a hack. This is very creative engineering design and execution. The base plate is such a brilliant idea making mounting everything possible.
You're right, this is not a hack. It's a very creative way to get yourself killed. Angle grinders spin at ludicrous speeds. Thousands of people regularly go to the ER every year, because the fibre cutting disk - that is specifically designed to work at those speeds - exploded in their face. Guess what happens, when your jerryrigged contraption with a belt - that is definetely not designed to run that fast - can't handle the insane speeds and forces and just blows up.
@@ichbrauchmehrkaffee5785скорости, на которых должен работать тот или иной инструмент известны, и чаще всего написаны на самом инструменте. Если их не превышать - всë будет в порядке.
I had a lot of old pipes and rebar to cut up and from what I read th-cam.com/users/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
I have a grinding machine, and I would like to modify one side of it similarly to how you did with the angle grinder in this video. Could you acquire and modify such a machine? You do very professional work.
Спасибо за ролик. Такое проще и быстрее купить, но смотреть как Вы работаете - одно удовольствие. Не подскажете где покупали и как найти такую модель пружинного керна, как уВас?
Great ideas, thank you. I would avoid cutting aluminum with a grinding disc in my shop. as aluminum dust can cause alumiosis. I would cut, grind aluminum outside. Thanks for sharing.
Much lower cost? That's a disputable statement. I mean, yeah, if you don't have anything else to do in your life, you can spend a lot of time - Labour, and money to buy the tools, materials and ancillaries to make all these "hacks". But before that, you need to have spent a few hundred hours in a shop to acquire the craftsmanship skills. All these are the definition of false economy, not only because of all the above, but to actually use them when you need them, you need to faff every time unscrewing and adjusting things to get the tool you want. Unless you are the guy who is making these videos, because then you are making money out of them. These ideas most certainly are ingenious and the definition of engineering design, but they are impractical for production which is why you don't see these "hacks" in real workshops.
If you were to combine angle grinder stand idea with the linear bearings slide you had in the other video, it would be like a compound sliding saw with the angle grinder.
angle grinders and bench grinders are terrifying to use. Something can suddenly become a deadly projectile with them things or suck your hand into their wheel.
Всегда было интересно, сколько уходит денег на такие вот полезные и "дешёвые" приспособления. Кто нибудь посчитает когда нибудь? Чтобы учитывать весь парк инструментов, деталей, расходников и материала? Например, на этом видео?
Gee clever took the guard off and made a guard.. who woulda thought a guard would be a great hack.. they should do those in the factory.. let them know.
It is always hard to believe for me in those "hacks" as soon as for making new parts isn't used previous hack. Why for sanding elements for "sliding cutting jig" weren't used a sander from the beginning?
Подобные лайфхаки приемлимы только если человек любит что то мастерить своими руками и делает это не ради изделия , а ради самого процесса . . Ибо время + материал = ... купить дешевле ( к тому же раза в два ) ... но всёравно лайк 👍
Es ist schon immer wieder verwunderlich, wie Leute Zeit, Material und Energie verschwenden, um Dinge zu bauen, die es für ein paar Euro zu kaufen gibt.
during world war two the enemy made bullets of bamboo. While the gun shot might not have been fatal the wounded soldiers suffered and died of the infection because the wood broke up into thousands of splinters. NEVER make spinning devices of wood!
This is a really naive approach The guide will be ground as you're cutting what's underneath, and it will get less and less precise each time. But it's not like anyone is going to actually build and use this.
what makes you think you have the right to prevent me from expressing my opinion? are you an engineer to certify these hair brained designs? will you pay the expenses when someone is injured be cause of faulty and unapproved modifications?
Яшидо хороший мастер и хороший инструмент в его руках делает полезные приспособления😊
Видео огонь асобено последная приспособа, надо сделать шины для ровного пропила НО НАДО ДЕРЖАТЬ ЕЕ, ГЕНИАЛЬНО.
Luar biasa karyanya pak saya suka siaran anda dari dulu apalagi mengenai power tool direnofasih
What ever you make with those hands of yours turns out brilliant
Thank you for everything.
Please support us again next time.
This video convinced me that going to the shop and buying a tool is cheaper.
You must lack comprehension then
That's why you are a looser 😂😉
Personally, I agree.
While making things is fun sometimes, just buying all the material would quite likely be more expensive (by the time postage is included)
One thing I have considered though is the belt sander.
A good narrow belt handheld is crazy expensive (between $600 ~$1000 with ability to do round, odd curves or fillets)
For flat or nose radii they are cheap enough but 'slack belt' gets very expensive (way more than I would pay for limited time it's actually needed)
The one tool I own that I am the most afraid of something going wrong - thank you does not seem enough in regards to this video!!!
This is not a hack. This is very creative engineering design and execution. The base plate is such a brilliant idea making mounting everything possible.
You're right, this is not a hack. It's a very creative way to get yourself killed. Angle grinders spin at ludicrous speeds. Thousands of people regularly go to the ER every year, because the fibre cutting disk - that is specifically designed to work at those speeds - exploded in their face.
Guess what happens, when your jerryrigged contraption with a belt - that is definetely not designed to run that fast - can't handle the insane speeds and forces and just blows up.
it is interesting that you use the word "execution". I have seen the kind of harm that can result from such stupidity
@@ichbrauchmehrkaffee5785nah i use variable mine usually spins slow
@@ichbrauchmehrkaffee5785скорости, на которых должен работать тот или иной инструмент известны, и чаще всего написаны на самом инструменте. Если их не превышать - всë будет в порядке.
I had a lot of old pipes and rebar to cut up and from what I read th-cam.com/users/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
I am saving all your videos in my playlist and in my heart
Such a clever guy and true craftsman - love to see that!
I have a grinding machine, and I would like to modify one side of it similarly to how you did with the angle grinder in this video. Could you acquire and modify such a machine? You do very professional work.
Even your sacrificial block of wood is super-chill bro!
Спасибо за ролик. Такое проще и быстрее купить, но смотреть как Вы работаете - одно удовольствие.
Не подскажете где покупали и как найти такую модель пружинного керна, как уВас?
Great ideas, thank you. I would avoid cutting aluminum with a grinding disc in my shop. as aluminum dust can cause alumiosis. I would cut, grind aluminum outside.
Thanks for sharing.
may god bless you more sir
A true engineer!
Very nice, Good idea...
Thanks for sharing... 👍 14:52
Thank you very much.
I will do my best to make sure you enjoy my next one as well.
Clever stuff, it's your thing 👌
It is encouraging. Thank you very much.
Very nice excellent idia.👌🏻👌🏻👍🏻
Such an amazing perfectionist. You don’t see this much in life……..
Thank you very much. I will do my best next time.
Congratulations verynice and original work
I am very happy. Thank you very much.
The thought processes you used to create these variations HURT MY BRAIN! Brilliant!
Thanks. Japan is now in a season when it is pleasant to think outdoors.
Brilliant ideas. Thank you.
Glad to hear it. Thank you.
Another series of beautifully made jigs and tools ... very useful and at a much lower cost of the tools you are replicating ... superb 👍
Luciana 8😮a a 🎉😮😮😮é 😢😢😢😢😢😢que o 😢😢😢😢😢😢😢😢😢😢😢e 😢😢😢de 😢😢😢😢😢😢😢😢à 😢😢😢a 😢😢😢😢😢😢😢😢😢
I am very happy. Thank you very much.
Much lower cost? That's a disputable statement. I mean, yeah, if you don't have anything else to do in your life, you can spend a lot of time - Labour, and money to buy the tools, materials and ancillaries to make all these "hacks". But before that, you need to have spent a few hundred hours in a shop to acquire the craftsmanship skills. All these are the definition of false economy, not only because of all the above, but to actually use them when you need them, you need to faff every time unscrewing and adjusting things to get the tool you want. Unless you are the guy who is making these videos, because then you are making money out of them. These ideas most certainly are ingenious and the definition of engineering design, but they are impractical for production which is why you don't see these "hacks" in real workshops.
No Buddy likes a smart ass!!
Bravo,good ideas 🎉
Excellent work sir. I especially liked your push stick at 14:20
I need a 2in. X 72in. belt grinder and thought about doing something like this… I just have your skill shit. Amazing yet again sir.
For a lot of hobbyists, the safety rule is "If I can do it 20 times without injury, it's 100.0% safe."
nice! last one is what I am looking for!😊
Thank you very much. Please try to make it.
Unas brillantes ideas . 💯💯👍👍👍
Great work dude 👍👍
Glad to hear it. Thank you.
Great ideas, thank you so much!
If you were to combine angle grinder stand idea with the linear bearings slide you had in the other video, it would be like a compound sliding saw with the angle grinder.
Tuyệt vời 👍👍
Cảm ơn. Tôi đang hạnh phúc.
very good!
Thank you very much.
Very nice tutorial. BTW what kind is the center punch you are using?
新潟精機（Niigata Seiki）
Product number AP-M
Thank you for watching.
Спасибо за ролик👍
Цените все.
Новый вызов. Рад, что вы смотрите.
G R A C I A S !! ✨
You’re a genius man!
День собирать приспособу ради минуты работы то что можно сделать ровными руками😂
Excelentes proyectos. Gracias por enseñar!!!
you are sensei hacker
Always Japanese precision 👍👍👍
Amazing. What is the clamp dimension ? Top/Grider Head Hole Diameter may change brand to brand.
65 x 65 mm = found it in your data sheet. thx .
angle grinders and bench grinders are terrifying to use. Something can suddenly become a deadly projectile with them things or suck your hand into their wheel.
Всегда было интересно, сколько уходит денег на такие вот полезные и "дешёвые" приспособления. Кто нибудь посчитает когда нибудь? Чтобы учитывать весь парк инструментов, деталей, расходников и материала?
Например, на этом видео?
Perfecto
Lo admiro eres un artista
Gee clever took the guard off and made a guard.. who woulda thought a guard would be a great hack.. they should do those in the factory.. let them know.
Для токарных работ по дереву ,всё таки обороты болгарки многоваты ,лучше наверно в такой конструкции использовать дрель .
すごい！
Болгарка для труднодоступных мест будет?
this guy is sick!
The narrow minded comments reflect that the point is missed.
The video was made to show you how, not to save you anything.
It is always hard to believe for me in those "hacks" as soon as for making new parts isn't used previous hack. Why for sanding elements for "sliding cutting jig" weren't used a sander from the beginning?
Ролик о том, как самоделкины спешат в травмпункт или как быстро ухайдохать угло - шлифовальную машину...
Подобные лайфхаки приемлимы только если человек любит что то мастерить своими руками и делает это не ради изделия , а ради самого процесса . . Ибо время + материал = ... купить дешевле ( к тому же раза в два )
... но всёравно лайк 👍
За слоупока лайк
Cara mundurkan gokartnye gimana ya?
12:57 Never cut metal horizontally.
Thank you for watching and pointing this out.
👍👏👌🤝
Thank you for watching.
Es ist schon immer wieder verwunderlich, wie Leute Zeit, Material und Energie verschwenden, um Dinge zu bauen, die es für ein paar Euro zu kaufen gibt.
Чтобы сделать такой станок надо еще купить 5 других станков. Смысл тогда делать лучше купить и не мучаться.
🤝🙏
during world war two the enemy made bullets of bamboo. While the gun shot might not have been fatal the wounded soldiers suffered and died of the infection because the wood broke up into thousands of splinters. NEVER make spinning devices of wood!
Только вес у неё теперь как у большой Болгарии))
This is a really naive approach
The guide will be ground as you're cutting what's underneath, and it will get less and less precise each time.
But it's not like anyone is going to actually build and use this.
на замутки для болгарки уйдет больше денег ежели купить сразу подходящий инструмент.
это рациональность в обратную сторону.
What square is used at 1:03 ?
新潟精機 (Niigataseiki)
Product model number T-08KD
Thank you for your interest.
Деревянное основание на маятниковой болгарке очень быстро сгорит.
какой интерес делать копию инструментов которые есть в продаже😢
the cost of an injury could make the proper equipment look cheap
Thank you for watching and for your feedback.
Oh come on live a little
Most un-American thing I've ever heard! 😂😅😂😅
#freehealthcare 😉
This is innovation
That lathe setup is too fast to be safe.
Gut aber sehr Laut 😢
واقعا واقعا یکی از بیخود ترین ترفندهایی بود که توی یوتیوب دیدم
Кранты болгарке... Все опилки засосет в двигатель.
Чехол для iphone
V абсолютно беспантовая херня
как зае эти видосы подобные: да сними защитку, поставь диск по дереву и пили металл - отлетит в лоб на этом и успокоитесь
🤎🤎🤎👍👍👍👍👍
Thank you for watching.
ТУФТА...
Alll wayyyyy too much work for relatively nuche and cheap tools
😂
Наши на Прут,Немец на Сирет.
Не стоит маразм автора называть словом "хитрость"...
Вам заняться нечем?
Странно.... у чувака столько годного инструмента, а занимается херней....
Or I just go to the store and buy a belt sander.
it is NEVER a good idea to add homemade devices to a hand grinder
Stop it. Every tool is dangerous: it’s more about user responsibility and care.
Mum! I told you to stay off TH-cam 😂
what makes you think you have the right to prevent me from expressing my opinion? are you an engineer to certify these hair brained designs? will you pay the expenses when someone is injured be cause of faulty and unapproved modifications?
@@uniquegiftpensLearn how to make tissues.
@@uniquegiftpensopinions are like assholes... everyone has one, even an asshole .. 😏
Angle grinders are for grinding. Stop making useless and dangerous things. Go buy a belt sander and a lathe.
Что болгаркой слабо сделать, а где пульт......
If your this clever. Why haven you figured out how to be rich by now. Then just buy the tools.
The price to do this isnt worth the effort- just but a sander!
А зачем такой траходром? Купи ленточку, положи на бок и счастье.
Зачётно!
Thank you for watching.
Круто
инструкция как перепортить кучу материала и собрать бесполезную херню
What a waste of time