Mark, I been watching your videos and I love them! really profesional work. Can I ask you where do you get that flux? I have ordered from severar places but it doesn't flow as easily as yours. Thanks!!!
Thanks for this video i have same problem with my Motorola Turbo Display Connector, & also i have another dead motherboard to replace connector but without proper tools its so difficult job.
+zaid khaled I don't say a number because a number is meaningless. Learn your own station. The temperature you actually deliver to the board depends on your nozzle size and shape, your airflow setting, how far you hold the nozzle from the board, and the temperature setting. I regularly use 3 different hot air stations and every one of them needs a different temperature.
Can you help me I broke the connecter latch my touch screen doesn't work any more. On youtube it says do a hard reset that didn't work. I tried to tape everything. I had it working but not the touch this all started cause I had the white death screen doing everything. So I thought I try to fix it watch youtube videos. But I broke the middle connecter latch.
Hi Mark, Where did you get the new connector from? I was replacing a battery on a SM-P600 and I bumped the charge port flex cable latch on the MB and it went flying and I can't find it. Do you know if I could just remove the latch from another connector and install on this broken connector, or would I need to replace the whole connector? Where can you get them? Thanks. Ron
kerry Louise it's been a while but if I remember correctly, the LCD ribbon simply clips into sockets on the LCD and board so that should be pretty easy to replace.
Is 80 pin fpc connector ! is the same for Samsung Galaxy tab 4 sm-t530 But you have a 45 pin to on sm- t530 and same on tab 2 don't mistake that ! Both are different parts!
there is no traces and the pads are gone. i tried scraping a bit off pin 27 but it went through to ground and its not ment to be a ground pad as the other end that goes to the lcd isnt ground
Hi Mark, Where did you purchase that Digitizer FPC Replacement for "Samsung Galaxy Tab 2 10.1", I need 1 for my "Samsung Galaxy Tab 4 10.1" but unable to find 1 :(
+Mark Shaffer Thanks Mark, I have checked them last few days, but they don't have it for "Samsung Galaxy Tab 4 10.1 T530". I also searched the entire website, no go :(
+Badman Oorah yeah they probably don't have it. you're going to have to either source one from a donor board or count the pins and find a matching connector on some other device then try to find the replacement part for that device.
Great work Mark. No body would know that the socket connector was replaced.
instaBlaster.
Please list the items that you used like flux solder and where did you buy em??
thank you
true technician. thats what you are.
Mark, I been watching your videos and I love them! really profesional work. Can I ask you where do you get that flux? I have ordered from severar places but it doesn't flow as easily as yours.
Thanks!!!
Miguel R I order it from Jason at microsolderingsupply.com
This man is a magician, and here's me thinking I could solder...
Thanks for this video i have same problem with my Motorola Turbo Display Connector, & also i have another dead motherboard to replace connector but without proper tools its so difficult job.
Hot enough why you don't want to say the number? There is no benefit from this video without details dude
+zaid khaled I don't say a number because a number is meaningless. Learn your own station. The temperature you actually deliver to the board depends on your nozzle size and shape, your airflow setting, how far you hold the nozzle from the board, and the temperature setting. I regularly use 3 different hot air stations and every one of them needs a different temperature.
Can you help me I broke the connecter latch my touch screen doesn't work any more. On youtube it says do a hard reset that didn't work. I tried to tape everything. I had it working but not the touch this all started cause I had the white death screen doing everything. So I thought I try to fix it watch youtube videos. But I broke the middle connecter latch.
Please fix mine
Hi Mark, what q tips do u use, thanks
Hi Mark, Where did you get the new connector from? I was replacing a battery on a SM-P600 and I bumped the charge port flex cable latch on the MB and it went flying and I can't find it. Do you know if I could just remove the latch from another connector and install on this broken connector, or would I need to replace the whole connector? Where can you get them? Thanks. Ron
ron klo I forget where I got this one, somewhere I found on Google. You can replace the latch if you can find one.
is it easy to replace the LCD ribbon? mine is broke and the bottom half of my screen won't work so can I purchase one of eBay and replace it?
kerry Louise it's been a while but if I remember correctly, the LCD ribbon simply clips into sockets on the LCD and board so that should be pretty easy to replace.
Hi wondering what location your shop is at, have the same problem with mine,.thanks
I take most repairs via mail. You can get more info at www.ipadrehab.com
Amazing video, detail is excellent. I don't have the bits to do this myself, does anyone know if you can send your tablet off to have this fixed?
sgt chief apone most of the work I do is mail-in. You can get a quote at ipadrehab.com
Please reply how many pin FPC connector do you need? 45 pin or 80pin?
Is 80 pin fpc connector ! is the same for Samsung Galaxy tab 4 sm-t530 But you have a 45 pin to on sm- t530 and same on tab 2 don't mistake that ! Both are different parts!
Is 80 pin fpc ! Samsung Galaxy tab 2 10.1 and Samsung Galaxy tab 4 10.1 sm-t530 use the same fpc both 80 pin an 45 pin is the same !
what do you charge? I need help
You can request an estimate via our website at www.ipadrehab.com
hi mark do you know where pins 26 and 27 on a tab e t560 can be jumped to the pads are completely missing
I do not. Read the board and if that doesn't tell you anything, use your multimeter to probe around in continuity mode.
there is no traces and the pads are gone. i tried scraping a bit off pin 27 but it went through to ground and its not ment to be a ground pad as the other end that goes to the lcd isnt ground
Hi Mark,
Where did you purchase that Digitizer FPC Replacement for "Samsung Galaxy Tab 2 10.1", I need 1 for my "Samsung Galaxy Tab 4 10.1" but unable to find 1 :(
I think it was something like parts4sale.com or some generic name like that. maybe parts4repair.com
+Mark Shaffer Thanks Mark, I have checked them last few days, but they don't have it for "Samsung Galaxy Tab 4 10.1 T530". I also searched the entire website, no go :(
+Badman Oorah yeah they probably don't have it. you're going to have to either source one from a donor board or count the pins and find a matching connector on some other device then try to find the replacement part for that device.
Yeah, I may have to count the pins and find matching connector. It seem to be easier this way :). Thanks Mark
@@dvu0704 is the same as tab 2 10.1 they are same parts you can use that from tab 2 10.1 ! And go on Ali Express they are many parts !
Thats awesome!very clean work,thanks for sharing.