Great job going over everything! I really needed this video, I'm about to start my career as a paint technician, and I'm trying to learn as much as I can before I start my job.
Thanks for the reply! This one is a little dated, but still very helpful. We have some newer ones, so be sure to check those out in our "Latest Videos" playlist. A few things have changed regarding the mixing instructions. Be sure to check the manual or latest video. You can download the manual on our website under the "Library" menu.
We normally use Poly Fiber Super Fill for fiberglass work. It is very light and sands nice. Then use EkoPrime or EkoPoxy to finish it out ready for paint.
Orange peel and runs are a result of technique and/or equipment. Runs are usually from over thinning. Technique can certainly cause them as well though. Orange peel can be a variety of issue, but the most common is using a low quality paint gun, not setting it up correctly, or not using enough air. Having an air compressor that can't keep up is another common cause. One other thing people fail to consider, if there is texture on the base coat, the paint will follow it. Make sure the primer layer is sanded good and flat. Lastly, make sure your technique is correct. Applying to heavy on the fog coats or with viscosity too thin can set up orange peel. But done properly our finish is glass smooth and a deep gloss. If you have questions, we are always here to help! Just call or email.
Great job going over everything! I really needed this video, I'm about to start my career as a paint technician, and I'm trying to learn as much as I can before I start my job.
Great video, love your paint system.
IT IS VERY INTERESTING AND I TO LEARN MORE LITTLE THANKS YOU FOR TIME
You are welcome! Be sure to check out our newer videos!
A lot of information given here, and a long video, but you can bet I'll reference this video in the future. Thanks for all the knowledge you share.
Thanks for the reply! This one is a little dated, but still very helpful. We have some newer ones, so be sure to check those out in our "Latest Videos" playlist. A few things have changed regarding the mixing instructions. Be sure to check the manual or latest video. You can download the manual on our website under the "Library" menu.
Excellent Video! I will be painting my airplane soon and I will check you out.
Nice work
Will any glazing putty work with your system? Or is a special glazing putty needed for the waterborne products?
We normally use Poly Fiber Super Fill for fiberglass work. It is very light and sands nice. Then use EkoPrime or EkoPoxy to finish it out ready for paint.
Sounds great for professionals with really high end booth building a Kit plane probably not going to work never get home paint booth clean enough.
I'm thinking with a little thought, and a few dollars you can get great results.
Shared in Helicopter Safety
orange peel or runs happens, i use to work with getglow and acryo glow from sherwin williams aircraft paint
Orange peel and runs are a result of technique and/or equipment. Runs are usually from over thinning. Technique can certainly cause them as well though. Orange peel can be a variety of issue, but the most common is using a low quality paint gun, not setting it up correctly, or not using enough air. Having an air compressor that can't keep up is another common cause. One other thing people fail to consider, if there is texture on the base coat, the paint will follow it. Make sure the primer layer is sanded good and flat. Lastly, make sure your technique is correct. Applying to heavy on the fog coats or with viscosity too thin can set up orange peel. But done properly our finish is glass smooth and a deep gloss. If you have questions, we are always here to help! Just call or email.
How about Low Volume Low Pressure guns (LVLP)? Any thoughts/advice?
I have used a Sata LVLP with very good results.
@@StewartSystems thank you!
@@tsilikasp You are welcome!
Low angle light check is also known as CANDLEING
nolentiendo ni mays pero pinta bien ese bato
Arturo Volverá Olvera dice que se la mames
My work filled like a same but now i am searching for the job .so any one have a same filled . To please contact to me .
សួរស្តី🇰🇭
Not to bad I can spray as good or better then and robot to spray
tanks educat for me
Ok so who can use me? I have a resume on hand 😐