ELECTROMAGNETIC Drill Press Stand [PLANS]
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- If you would like to download plans for this project, click the blue "JOIN" button next to the SUBSCRIBE button :)
Before the construction of the drill press, I've decided to make an electromagnetic vise to check if it would work.
Guys from Make it Extreme have inspired me to make this , here is their channel. You should definitely check their constructions.
/ makeitextreme
Despite the lack of a milling machine, It has turned out that the file could also deal with it. It has been very time-consuming, but fortunately successive.
Electromagnets are connected in series, so they do not heat up. They are powered by a 12V 4A power supply. This is enough, although a 10A power supply would be better.
The stand base is made very solid from a 10mm thick sheet and a 6mm thick angle. Thanks to the adjustable column, I haven' had to worry about perfect angles during welding. Everything can be easily set up thanks to four screws and nuts.
The sliding mechanism moves very smoothly and stably. Thanks to the bearings, some of the resistance has eliminated which gives better working comfort.
I've used Metabo Sb Edv1000-2-S metabo drill with 1010 watts power, which is 3 times more than my bench drill.
I've also planned to do lighting, unfortunately I've been tired and I couldn't do it:)
This project has turned out to be a very successful construction. The whole weighs over 20 kg, it is very stable, strong and effective.
--------------------------------------------------------------------------
Follow me on:
INSTAGRAM made_inpoland
FACEBOOK 1187887134621389/
--------------------------------------------------------------------------
Some tools I used:
Step drills - www.gearbest.c...
Tap and die set - www.gearbest.c...
Bit Screw - www.gearbest.c...
--------------------------------------------------------------------------
Business contact: darus627@gmail.com - วิทยาศาสตร์และเทคโนโลยี
![Electromagnetic Drill press VISE [PLANS]](http://i.ytimg.com/vi/-9fEJyZCehM/mqdefault.jpg)
![Electromagnetic Drill press VISE [PLANS]](/img/tr.png)
Finally, a new video with over 100k subscribers! :) Thank you for being here!!!
Consider supporting us on TH-cam by using the button "JOIN" or click on this link:
th-cam.com/channels/8KQ6_RNAvc7a3B5hZ980iQ.htmljoin
Plans goo.gl/6ht9Ci
Made in Poland man you rock. Awesome construction. Would you add a cross table and make a tremendous milling machine ? What was the total cost you spent ? Congrats
What is the other material that you mixed into the epoxy?
Gratulacje za 100k !!! A sam projekt jak zwykle mega! :)
Made in Poland I'm guessing the sand was for weight?
Love your stuff. Keep on building.
"If you can't make it perfect, at least make it adjustable." That's going to be my new workshop motto😂
Pan, jest RZEMIEŚLNIKIEM! I Dokonywanie stół elektromagnes dla moja Wiertarka. Mam już dwa transformatory z kuchenek mikrofalowych. Teraz mam projekt! Dzięki za inspirację! Przy okazji mieszkam w USA, w stanie Tennessee!
Przetłumaczone z MS Word
Chłopie. Uwielbiam Twój pomyślunek, a jeszcze bardziej zapał i realizację. Pozdrawiam. Oby więcej takich pozytywnych ludzi.
Aaa ! I nie przejmuj sie krytykantami co sami ci do pięt nie dorastają bo sami niczego podobnego nie zrobili.
Very smart. This guy... I look up to. Because both his hands and his brain work good.
I really don't think there is anything you can't build my friend!!! 👍👍👍GREAT JOB!!!!
Nigdy sam bym się wykonania czegoś podobnego nie podjął ale respekt za wytrwałość w dążeniu do celu !!!
I miss you stick welding you made it look easy.
Sometimes I miss stick welding too :)
Very nicely made using your hands and your brain. Thank you very much for sharing.
Projekt i wykonanie znakomite, brawo Made in Poland
Salut z Doniecka.
Nie przegapisz Twoich filmów przez rok
Jesteś po prostu przystojny !!!
Отличная идея с магнитом!👍
4e
Классная стойка для дрели. И классный электромагнитный столик. Лайк
One of the best diy press drill machine video that I had seen so far.
Polska ma utalentowanych ludzi.
I have been working many times with MOT and used one for magnet too.Magnets are extemely powerfull. This drill stand is awesome!
Awesome! Your homemade drill press and work. 👍👍👌👌
I will upload my homemade drill press on Sunday if I finish
Excellent, thank you very much.
Świetna robota! Okazuje się , że już nic nie można wyrzucać, tylko gdzie to wszystko składować😀 Super!
great work! Some time ago i've saw a magnetic plate somewhere from 60-s. The final layer was filled up with lead, so it's really easy fix it up, if your drill gets the plate
Bardzo fajna wiertarka! Naprawdę podobał mi się panel z magnesami spod kuchenki mikrofalowej! Jesteś bardzo dużym facetem! Przepraszamy za tekst. Oglądam Twój kanał z Rosji i korzystam z Google Translator. Powodzenia w branży obrabiarek)))
No no. Szacun się należy. Zgrabnie żeś Waść to wykonceptował. A umiejętności wykorzystania dostępnych materiałów tylko pozazdrościć. Pozdrawiam
liked this video before it even started because i know its going to be awesome
Przecież to jest świetne. Jak mi się uda dorwać zepsutą mikrofalę od razu zabieram się za taką wiertarkę z magnesem
This magnetic holder would be a nice extension of the well known Wabeco drill stand. Impressive metal maker skills!
Another nice addon would be a protection screen to prevent metal sparks flying around.
Keep up the good work!
That's a great idea. I've been wanting to make my own surface grinder and haven't come up with a cheep way for obtaining a magnetic chuck. Something like this with maybe two more coils should do nicely.
Im speechless BRAVO from Greece!
You almost can create any machine... you are great machine creator...
Madeinpoland you need a third switch to pass a.c. threw the coils to demagnitise everything you have magnetized with this, that way you won't be a walking mag lol. Awesome video. Maker in Rhode island USA here
Лучше и не придумать! Автор КРАСАВА! Лайк и подписка на канал👍👍👍
If you had cut two holes in the back of the magnet box, placed it face down onto a sheet of glass, then poured in the resin, through the holes, you would have had a perfectly flat surface, without all the grinding and filing.😊
However, excellent job! 10 points!😉
.
Nice video, for what your design lacks in refinement, it more than makes up in with in your creative improvised methods that us without a fancy workshop can relate to and apply ourselves
That is as co0l as a Cucumber! Hope u have many years of joy with it.
Very ingenious idea. Thanks for the video.
Darek, Just saw this video. Really like the magnet and the drill press build. Watch out for the unburned oil smoke. It has been proven to cause bladder cancer in all trades that cut metal at high temps with oil.
Rare people on earth. Good job!
Great work, inspiration. I built myself a hydraulicpress with alot of ideas from you. 🇸🇪🇵🇱
Супер! Созидать всегда хорошо. Умение на все 100%. Подписался и не пожалел.
Jesteś inteligentny i kreatywny! Dziękuję bardzo! (sorry if I said that wrong; it's all I know in Polish)
Электромагнит лучше сделать из домофона дверей. Трансформатор 1 обмотки имеет по синусоидальному напряжению своё реактивное сопротивление X. Тогда напряжение и ток у электромагнита всегда постоянный, соответственно при постоянном токе сопротивление катушки будет намного меньше реактивного. Надо уменьшать напряжение на катушке активное постоянного тока до сопротивления в изначального реактивного сопротивления, что проверяется током загруженного трансформатора в работе через диодный мост к амперметру до разделения трансформатора по полам. Потом 230 делим на измеренный ток вычислим правильное реактивное сопротивление для дальнейшего расчёта ,а именно сопротивление реактивное должно стать равному активному что делается уменьшением напряжением постоянного тока проходящему через электромагнита. Я думаю что ваш электромагнит скорее всего без охолождения жидкостью скорее всего будет сильно нагревается.
Правильно, и микроволновку портить не придётся. А домофон можно в подъезде взять.
Muy buen invento y trabajo, has creado un electro imán para la sujeción de los hierros a tratar, enhorabuena, saludos desde Punta Umbría-Huelva-Andalucía-España (Spain)
отличная работа,уважаю!
Bravo 😄 to the channel...looks very easy but....
It will take years for me to assemble all those tools and equipments in one place 😣...
Very well done partner,,, Just too Good
You are an outstanding craftsman, and an excellent all around technician too!!!!
Super. Badz kreatywny, pozytywny, udowaniaj sobie a nie innym.
Very good. I have two suggestions, embed a piece of PVC pipe between the magnets so that swarf can drop though into the tray below. Use PVC so that the fields of the electromagnets are not impaired. (You will of course need to drill a hole in the table below the magnet assembly). A vice bolted to a suitable sized plate for the magnet assembly, will help hold smaller or awkward parts.
For once a diy solution in my recommendations that doesn't start with hot glue and a toilet paper roll! This looks very practical and well thought out.
great job....learning everyday from you Sir
Отличный результат. Молодец!
Wykonanie genialne, gdy tylko zobaczyłem mikrofalówkę już wiedziałem na czym będzie polegał elektromagnes :D
Szkoda tylko, że przy uszkodzeniu cewki będzie problematyczne by ją wymienić, ale film genialny!
Canada: 1st thanks much 4d video. Please it's time 2 do next video(s) on wiring schematic diagram of the Drill, DIY Magnetic platform. Inspiration Ideas Creativity Motivation. Really appreciate what you had done. God bless.
Tak jak pisałem wcześniej jesteś za każdym razem lepszy ( widać to choćby po spawach )
Powodzenia trzymam kciuki
Хорошая решение, но не нужно сворачивать провод кольцами. Создаётся магнитное поле которое приводит к потере напряжения и тем самым повышению силы тока. Проще говоря провода будут плавить изоляцию. Лайк однозначно.
Muito bom sua inteligencia ,com recuperação de sobras de ferragens e sucatas ,com gasto minimo formando algo novo,meus parabéns pelo seu conhecimento e dividir o que sabe com os amigos ,muito bom .
You’re videos are so inspirational, I hope to be this good some day
I love watching you make things. This is one project I want to make myself with my everlast welder.
MiP fabricated two e-cores with an angle grinder. Awesome! Just found this channel and subscribed. This is what engineering is all about!
Very nice friends
WoW!!! Amazing proyect and skills!!! Congratulations from Argentina!!!!
You are a master!!! Congratulations from Argentina...!
Awesome build!
Great idea
Good work , excellent tools machine !
Well done. Very skillful
I like the drawer feature under the magnetic table:) Dobra robota!
Like from Iran.Tabriz
Fantástico! No he podido dejar de verlo hasta el final.
I honestly believe if you are just as good as the guys on Make it extreme💪👌
Impressive build...Well done, Darek !
Spoko projekt. Polak Potrafi. Powodzenia! :)
You just moved Make it Extreme's concept on a other level and build a whole drill press! perfect work my friend. Pozdravujem zo Slovenska!
Nice video and project. I liked that you used sand as aggregate and also the chip tray was nice.
Darek, the greatest Polish export since Chopin!
Congratulations on the incredible skill and creativity!
Just found your channel! Hello from Virginia!
Very complex machine, very good job! Молодец!
Teraz droga po 1 000 000, świetna robota!
Отличная задумка!
Using sand to make more volume for the resin; smart ! 🤔
lemmonsinmyeyes keeps the shrinkage down as well as any potential for cracking at the corners of the coils. Yes, smart!
So many creative people, why couldn’t I be one.
Well, thats one way to magnetize the crap out of your drill bits, really great job though dude
Amazing job. Bravo
Found 'em ! EXCELLENT ! Thanks !
That is really awesome. Wish you were my neighbor
Parabens otimo serviço. Vou fazer uma pra mim, mas com o imã embaixo da base.
Great Job! You can be proud of it. Only the wiring looks like bad, it could be nicer, if you hide anyway the wires
Muy bueno el taladro, se nota tu talento para visualizar las partes mecanicas. Un saludo amigo. ;)
Классная идея с электромагнитом! 👍🤝
thank you very much you are amazing I love Poland
Gotta' hand it to ya' man, you build some pretty ingenious stuff!!! I have a benchtop drill press already, but I'm building the electro magnetig setup for it!!! Thanks for the idea! Oh, by the way, subbed!!!
I love this Chaneel. Greetings from Slovenia 🇸🇮🙂
Kolejna inspiracja, muszę zacząć też nagrywać filmiki z moich prac
You are ridiculously skilled... subbed
Творит чудеса.браво так держать.
Ты супер.Без слов и все понятно.Смотрю пятый раз всеравно что первый.
Very nice work *Made in Poland* one of the best channels on TH-cam, I watch all your videos.
Thanks God.
Good work 👍
Bom trabalho amigo 👍
Completely insanelly perfect idea and a hell of a perfect making.bravo fron greece again.keep up the perfect work and your loco ideas and keep sharing to make your subscribers learn from you.thanks for sharing.thumbs up!